Sharif Digital Repository

Smoothed Particle Hydrodynamics (SPH) is a Lagrangian method for simulation of fluid flow. Movable particles are used to interpolate fluid properties instead of fixed Eulerian grids in this method. By essence, the aforesaid particles are movable points which carry the fluid properties such as temperature, enthalpy, density, etc. these variables can also be the stress, strain or the rheological properties of the fluid. Thus, this method needs no grids and the fluid properties are calculated using an interpolation mechanism which classifies this method as meshless. A computational code is designed using SPH for the simulation of multiphase flows. Usage of the Lagrangian formulation has made it... 

In this thesis an SPH method is used for simulating multiphase two- and three-dimensional Newtonian fluid flows. The weakly compressible algorithm consists of two steps of prediction and correction. In the prediction step, the velocity field is integrated forward in time without enforcing incompressibility. The correction step consists of enforcing incompressibility by solving the pressure Poisson equation which creates a trade-off between the pressure and density variations. The surface tension force is applied in the linear momentum conservation equation by the divergence of the surface stress tensor. Advanced techniques are applied to achieve better convergence and reduce pressure-related... 

By exploring huge gas-condensate reservoirs, three-phase transient flow modeling demonstrates its crucial role in designing dynamic kill, relief well parameters and kill procedure of such wells. Controlling gas-condensate well needs robust transient three phase models capable of capturing discontinuities in density, geometry and velocity of phases. In this paper, two phase Advection-Upstream-Splitting-Method hybrid scheme is extended to three-phase model capable of modeling blowout and dynamic kill in gas-condensate-water wells. Density and viscosity changes are calculated using Peng-Robinson equation of state and in according, flow model parameters are corrected.The capability of this model... 

Smoothed Particle Hydrodynamics (SPH) is a numerical Lagrangian meshless method which has numerous applications in astrophysics, hydrodynamics, free-surface flows, jets and sprays formation. Atomization of continuum liquid to fine droplets or in other words, liquid breakup processes are emerged in many engineering applications such as fuel sprays inside the combustion chamber of internal combustion engines that sizes of produced sprays significantly influence the engine’s efficiency. This research is accomplished to investigate the one-phase and two-phase flows of liquid jet breakup. For this aim, an open source code called SPHysics which solves the flow field by SPH method is utilized. This... 

Asphaltene, the heaviest and most polarizable fraction of crude oil, has a potential to precipitate, deposit and plug pipelines, causing considerable production costs. The main objective of this study is to contribute to the thermodynamic and transport modeling of asphaltene in order to predict its precipitation, segregation and deposition. Potential calculation of some thermophysical properties of asphaltene is also explored. Predicting the flow assurance issues caused by asphaltene requires the ability to model the phase behavior of asphaltene as a function of pressure, temperature and composition. It has been previously demonstrated that the Perturbed Chain form of Statistical Association... 

Different modeling and simulation techniques, new numerical methods and analyzing effects of different parameters on operation of bubble columns are continuously under study for optimized design, scale-up and prediction of industrial bubble columns. Tools for analyzing and developing gas-liquid systems are experimental techniques and computational fluid dynamics (CFD). In order to describe accurately the fluid dynamics of complex gas-liquid systems, more advanced mathematical models are required. To obtain a feasible numerical solution, efficient numerical techniques must be devised. One of such models that considerably reduces the assumptions and consequently increases the accuracy of... 

The effect of using backpressure of air injection in a microchannel on internal flow pressure drop were investigated in this study. Multiphase flows are commonly encountered in gas and oil industries. Flow fields in production operations are often complex and include multiphase flows of gas and liquid. Previously, because of their complex nature, these flow patterns have been mostly investigated only experimentally and empirical correlations based on the experimental data. From another point of view, it is almost impossible to experimentally realize all the flow conditions for each of the flow patterns. Nowadays computer facilities provide the tool to construct and use large-scale... 

Formation and detachment of drops are of fundamental importance in studying two-phase flows, such as ink jet printing, emulsion, and spray. Drops are formed under the effects of surface tension forces. After formation, forces like gravity detach the drop from the rest of the fluid. The flow rate is varied from dripping to jetting regime. In this project, formation and detachment of drops were simulated, using LBM with phase field model, which can simulate flows with high-density ratios and is a robust method for applying wetting condition on the walls. Results were validated using single-phase and two-phase flows. After code validation, the oscillations caused by formation and detachment of... 

Because of the importance of simulations in the oil industry, there are different software applications designed for this purpose. The purpose of the simulation in the oil industry is to reduce operational errors during the operation and to achieve the most ideal mode of operation. However, in the simulation of multiphase fluid flow because of the special circumstance, simulation plays an important role in the oil industry. OLGA multiphase flow simulation software is a strong simulation software for water, oil, Gas wells, wellhead facilities, refineries and pipelines and it is capable of simulating pipelines under various dynamic conditions. Simulation of drilling hydraulic parameters is... 

Flow measurement in both types of single phase and multiphase has a crucial place in a wide variety of industries, specially petroleum industry. for single phase flowmeters, improving their precision using different types of mechanical, mathematical and analytical techniques will be considered as an important step. Using multiphase flow meters will cause no need of volume catching and costly separators and also make us capable of taking well-timed decisions in production management. for making flow meters weather multiphase or single phase, there is a crucial need of a multiphase flow loop. To achieve that, an 8-meter-long flow loop using transparent Plexiglas pipes with inside diameter of... 

Transportation of cuttings and efficiency of the hole cleaning has been one of the major concerns of stake holders in the oil and gas industry.This is because a successful drilling program is a key to a productive and profitable oil and gas business. A successful drilling program is as a result of an efficiently cleaned hole. On the other hand, a poor or inefficient hole cleaning implies accumulation of cuttings or formation of cuttings bed in the well. This often leads to decreased rate of penetration, increased cost of drilling, fractured formation, increased plastic viscosity of mud as a result of grinding of cuttings and stuck pipe. Hole cleaning is effected primarily with a drilling... 

This study is aimed at simulation of double emulsion formation in a microfluidic double flow focusing device which consists of two cross-junctions connected serially. The water in oil (w/o) emulsions are produced in the first junction. In the second junction, water in oil emulsions are encapsulated by an outer aqueous phase to generate water in oil in water (w/o/w) double emulsions. Water in oil emulsions are formed in hydrophobic channels and water in oil in water double emulsions are formed in hydrophilic channels. A three phase numerical model, based on the VOF-CSF method, is developed for simulating the process of double emulsion formation. An adaptive mesh refinement technique is... 

In this study, two finite-difference lattice Boltzmann methods (FDLBM) are applied and assessed for the simulation of two-phase liquid-vapor flows with high density ratios. For this aim, the He-Shan-Doolen type lattice Boltzmann multiphase model is used and the spatial derivatives in the resulting system of equations are discretized by using the second-order central difference and modified Lax-Wendroff schemes. Suitable numerical dissipation terms and filters are applied to regularize the numerical solution and remove spurious waves generated by flow nonlinearities in smooth regions and at the same time to remove the numerical oscillations in the interface region of the two phases.Three... 

Reservoir simulation is a useful tool for efficient reservoir management and protective exploitation of non-renewable hydrocarbon resources as the main supplier of development programs in the country. Due to the nature of underground hydrocarbon reservoirs, the simulation faces several challenges, both in rock and fluid parts. These challenges should be overcome in order to provide reliable results from simulations. One of the major challenges pertaining to rock, is large discontinuous variations accompanied by anisotropy of rock permeability fields which causes numerous problems when governing equations are solved numerically. A viable numerical procedure shall account for complex reservoir...