Sharif Digital Repository

During power system restoration, it is necessary to check the phase angle between two buses before closing circuit breakers to connect a line between them. A novel approach for reducing large standing phase angle (SPA) based on Genetic Algorithm (GA) is presented in this paper. The proposed approach starts with a state estimation on Wide Area Monitoring System (WAMS) data measurements and considering power system operation and angular stability constraints, seeks an optimal control action scenario for reducing SPA. Since these constraints are evaluated based on WAMS data, the presented approach is considerably high speed and accurate. As an optimization problem, objective function of the... 

We characterize terahertz wireless channels for extracting data from nanoscale sensors deployed within human lungs. We discover that the inhalation and exhalation of oxygen and carbon dioxide causes periodic variation of the absorption coefficient of the terahertz channel. Channel absorption drops to its minimum near the end of inhalation, providing a window of opportunity to extract data with minimum transmission power. We propose an algorithm for nanosensors to estimate the periodic channel by observing signal-to-noise ratio of the beacons transmitted from the data sink. Using real respiration data from multiple subjects, we demonstrate that the proposed algorithm can estimate the minimum... 

Object handover as continually tracking an object across disjoint-view cameras is a necessary part of video-based monitoring systems. While having nonoverlapping cameras is a requirement for monitoring a wide area, there is no common 3D location that can be used to detect multiple views of the same object, in contrast with overlapping cameras. Appearance features play an important role for object handover in such camera networks. This paper focuses on modeling appearance features of moving vehicles by a new major color representation called codebook representation. Toward this end, in each frame, the k-means algorithm is used to cluster major colors of an object. In the subsequent frames, a... 

Development of design and production technology of centrifugal pumps for achieving better performance and less energy consumption in these devices has increasingly been taken into consideration. This is due to the fact that centrifugal pumps have an important contribution in industrial applications and energy consumption around the world. Accordingly, the international standards of centrifugal pumps, urge more precise analysis systems for obtaining the performance curves of these pumps. For this reason, a complete, precise and real-time monitoring and performance analysis system for centrifugal pumps is introduced in this paper. The pump characteristics are measured by precise measuring... 

Underground pipelines are important infrastructure for transporting energy resources, particularly water and oil. Due to the high risk of damage and possible consequences, close monitoring of pipelines is a serious challenge for researchers and decision makers. Piezoelectric sensors/actuators are being used to monitor the physical characteristics of pipelines, including corrosion and crack. Piezoelectric ceramics as transmitters and/or receivers are connected to data concentrators in order to monitor the defects in pipelines. The performance and accuracy of this system highly depends on the accurate interpretation of the received electrical signals due to changing mechanical fields. However,... 

System security indices play a crucial role with regard to monitoring system statues. These indices are derived from system measurements which are prone to either intentional or unintentional noises. To alleviate the effect of intentional noises, it is required to protect measurements data from bad data injection. In this regard, this paper intends to propose an approach to determine priority order of protected bus measurements in order to negate the effects of bad data injection on security indices. With this in mind, two security severity indices, the over loading risk index and the under voltage risk index, are considered. Genetic algorithm serves to find the highest deteriorating effect... 

Over past decades, extensive research has been performed on the measurement of land subsidence as a result of compaction of aquifer. This paper describes results from a new field-monitoring system to evaluate changes in matric suction and temperature profiles in soil layers over an extended time period. The monitoring system used in this study consists of inserting dielectric sensors into a 105 m borehole, drilled in a site in Ardabil Plain, The monitoring results from the site were used to calibrate predictions from HYDRUS-1D. The physical and hydraulic properties of the soil materials in different layers were obtained through performing some soil characteristics and filter paper tests... 

Nowadays communication and monitoring systems play an important role in power systems security. However, these systems are exposed to bad data injection through attackers. This paper is aimed to propose a priority order list of attacked buses in order to be fully informed about the attacker decision. To do so, system security is evaluated through two well-known risk indices including under voltage risk index and overloading risk index. A genetic algorithm (GA) is employed to determine the most severe attack for each of the security indices. The effectiveness and accuracy of the proposed model are scrutinized through simulations on the IEEE 30-bus network. The paper reveals that knowing the... 

The increasing trend in the number of smart connected devices has turned the routing procedure as one of the major challenges in IoT infrastructures. The Routing Protocol for Low Power and Lossy Networks (RPL) was introduced to satisfy different IoT application requirements through Objective Functions (OF). Although there have been several studies on introducing new OFs in order to fulfill specific IoT characteristics, e.g., energy and delay efficiency, reliability, and stability, but still there is a lack of novel OFs which fulfill the IoT application requirements in terms of both, the performance and the power consumption simultaneously. In this paper, we have proposed PEDAL, an OF which... 

The increasing trend in the number of smart connected devices has turned the routing procedure as one of the major challenges in IoT infrastructures. The Routing Protocol for Low Power and Lossy Networks (RPL) was introduced to satisfy different IoT application requirements through Objective Functions (OF). Although there have been several studies on introducing new OFs in order to fulfill specific IoT characteristics, e.g., energy and delay efficiency, reliability, and stability, but still there is a lack of novel OFs which fulfill the IoT application requirements in terms of both, the performance and the power consumption simultaneously. In this paper, we have proposed PEDAL, an OF which... 

The reliability of power electronic based converters has become increasingly important due to their wide-spread use in industry. An effective method to increase the availability of converters is to use condition monitoring systems for planning scheduled maintenances. This paper provides a method to monitor the condition of IGBTs in a back-to-back converter based on their on-state voltage measurement. Using the proposed system adds limited number of elements to the circuit but can be implemented independent from the converter. Considering the converter topology has made the proposed method applicable for condition monitoring of switches in different back-to-back converters. This advantage... 

In this paper, the performance of the sparse reconstruction (SR) and the delay-and-sun (DAS) methods for damage localization, were evaluated for various environmental and operational conditions, both numerically and experimentally. To assess these damage localization methods, a methodology based on the Taguchi method was used to make the experimental design, and a modified performance-index was defined to represent the quality of reconstructed images. Then, the robustness and the accuracy of each method, in a well-defined performance region relevant to in-service aerospace structures, were investigated using the Taguchi and analysis of variance methods. It was concluded that for the defined... 

Real-time measurement of soil water pressure has been recognized as an essential part of investigating water ow in unsaturated soils. Tensiometry, amongst different measuring techniques, is a common method for direct evaluation of water pressure. However, the lower limit of measurable water pressure by a conventional tensiometer becomes even more limited by increasing its length in the vertical installation. This paper describes the development of a Vacuum-Refilled Tensiometer (VRT) for monitoring soil water pressure independent of installation depth. This is achieved by fixing the distance between pressure sensor and ceramic cup together with incorporating an ancillary vacuumre filling... 

One of important subjects in power system restoration that already is not addressed is frequency control. Operators are often concerned with the size of load and generation, which can be safely increased. With the emphasis on higher utilization of power systems, monitoring of its dynamics is becoming increasingly important. This requires information with higher accuracy and update rates faster than those usually provided by traditional SCADA systems. In addition, it must be synchronized over a wider geographical area than that provided by traditional protection systems. Nowadays, the introduction of Phasor Measurement Units (PMU) and Wide Area Monitoring Systems (WAMS) as well as advances in... 

Buried pipe lines are an efficient way of transporting of water, sewage, oil, and gas resources in all over the world. Since the buried pipe lines are exposed to many unexpected conditions, such as landslides, corrosion, fatigue, earthquakes, material flaws or even intentional damaging, so the inspection requirements lead to adoption of new method of maintenance, protection and conserving. This report aims to improve the trustworthiness, reliability, yet economical technologies for monitoring of behavior and manner of buried pipe lines during operation and assessing the risk of pipe lines failure. Distributed sensors (piezoelectric) are surface designed and embedded to investigate the... 

Reliability evaluation is a key factor in serviceability and safety analysis of air vehicles. Structural health monitoring methods have grown to a degree of maturity in many industries. However, there is a challenging interest to tie in SHM with reliability assessment. In this respect, consideration of stochastic structural dynamics with SHM data and random loadings opens a new chapter in failure prevention. The current study focuses on the stochastic behavior of structures as a way to relate SHM data with reliability. In this respect, uncertain factors such as atmospheric turbulence, structural parameters, and sensor outputs are considered in the process of reliability assessment. Firstly,...