Sharif Digital Repository

2,4,6,8,10,12-Hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane (CL-20) as one of the high energy cage nitramines has been used in various propellants and explosive formulations. The performance of energetic materials depends on its particle size and shape. Therefore, in this research, microemulsion method has been applied for the preparation of CL-20 nanoparticles via oil in water (O/W) microemulsions. The optimized formulation contains water 45%, n-butyl acetate 20.5%, sodium dodecyl sulfate (SDS, as anionic surfactant) 6.5% and 2-propanol (as co-surfactant) 26.5%. CL-20 nanoparticles that were obtained by microemulsion method are spherical with an average diameter of 25 nm, based on TEM image.... 

The microemulsion method was successfully used to prepare a series of TiO2, Fe oxide and SiO2 doped TiO2 nanoparticles at Fe/Ti atomic ratio of 10% and Si/Ti atomic ratio of 15%. The molar ratio of water to surfactant (W0) was 2. The samples were calcinated at 350°C. The structural features of TiO2, Fe oxide and SiO 2-TiO2 were investigated by XRD, UV-Visible spectroscopy, SEM and TEM. XRD data verified the formation of typical characteristic anatase form in all the prepared Fe and SiO2-doped TiO2 samples. In comparison with the pure TiO2, Fe oxide and SiO 2-TiO2 samples were relatively large in particle size, indicating that doping with Fe oxide and SiO2 can help in increasing the particle... 

Experimental investigations are performed in order to determine the thermal conductivity of NiFe2O4 nanoparticles dispersed in deionized water. The magnetic nanoparticles are synthesized using a microemulsion method. The X-ray diffraction (XRD), transmission electronic microscopy (TEM), and vibration sample magnetometer (VSM) are used to characterize the structure, the size and the magnetic properties of the nanoparticles. The VSM results disclose that the NiFe2O4 nanoparticles are ferromagnetic at room temperature. Experimental measurements on thermal conductivity of the prepared nanofluids are conducted at different volume concentrations between 0% and 2% and in the temperature range of... 

2,4,6,8,10,12-Hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane (2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazatetracyclo dodecane (CL-20)-based polymer/plastic bonded explosives are used in propellant formulation. It can be predicted that CL-20-based nano-polymer/plastic bonded explosives are able to have reduced composite sensitivity and superior mechanical strength. In the current study, we have prepared two kinds of CL-20-based nano-polymer/plastic bonded explosives with ethylene-vinyl acetate copolymer and glycidyl azide polymer via the microemulsion method. Several visual techniques such as SEM/AFM/TEM techniques have been utilized for complete characterization of CL-20-based...