Sharif Digital Repository

In the current century, an energy storage is one of the critical and important factors affecting on human life. Rechargeable batteries, specially Lithium ion batteries (LIBs), can be considered as ideal energy storage devices including various advantages e.g. high energy and power densities. In this work, Tin IV sulfide (SnS2) and its composites, making by conductive materials e.g. Reduced Graphene Oxide (SnS2@rGO), are prepared during two different synthesis methods consisting of Hydrothermal and Hot-bath, and their properties are investigated as anode material in LIB. The structural and electrochemical analyses demonstrated that the composite sample prepared by hot-bath method exhibited... 

In this study, Lithium recovery process from lithium-ion battery was investigated by electrodialysis method. First, the cathode of the battery was leached in NMP to separate cathode from aluminum foil. Then, the cathode was leached in sulfuric acid with concentration 3.25 M and 10 volume percent hydrogen peroxide that pulp density was 55 g/L at 60°C for 100 minutes. in the next step, an electrodialysis cell was designed and created to recover lithium. And the influence of time, voltage, flow rate of feed solution, concentration of electrode solution and concentration of feed solution on process was investigated. Purpose of this project were investigated lithium ion recovery rate, lithium... 

Recently lithium iron silicate (Li2FeSiO4) has been used as a new cathode material for lithium ion battery. Li2FeSiO4 has such benefits like low raw material price so lower production cost, lower environmental pollution, higher safety, electro chemical and cyclic stability and high theoretical capacity of 166 mAh/g against other cathode materials like LiMn2O4, LiBNiO2, LiCoO2 and LiFePO4. In this research Li2FeSiO4 was synthesized through sol gel synthesis method and effect of chelating agent concentration, calcination temperature and time has been investigated. To determine the appropriate calcination temperature range, TG/DTA was performed. Then the dried gel powder was calcined at each... 

Interest in lithium sources has been increasing because of wide applications of the metal in high-energystorage lithium batteries and its compounds in otherfields.Lithium appears in lake, brines and several minerals such as spodumene, petallite, and lepidolite. Several methods such as ion exchange (adsorption), solvent extraction, and coprecipitation have been investigated for the extraction of lithium from seawater, brine, and geothermal water. The adsorption method is suitable for recovery of lithium from seawater because certain inorganicion-exchange materials show extremely high selectivity for lithium ions only.The objective of this study is to evaluate the applicability of nano... 

In this study, orthosilicate materials with chemical formula of Li2MSiO4 (M one or two transition metal/metals) were investigated experimentally and theoretically as cathode material of Li-ion batteries. The most important material in this category i.e. Li2FeSiO4 was synthesized by three methods including nitrate-based sol-gel, oxalate-based solid state reaction and oxide-based solid state reaction. Based on XRD and SEM evaluations, grain size of synthesized powders was estimated to be between 15 to 100 nanometers. Of these three methods, oxide-based solid state reaction was employed in this study for the first time. This syntheses method is very important due to the significant lower... 

In this work, butyl methylimidazolium tetrafluoroborate and butyl methylimidazolium hexafluorophosphate are used as ionic liquid and lithium perchlorate and lithium hexafluorophosphate as lithium salt. Dimethyl carbonate and propylene carbonate are used as solvent to prepare diffrent kinds of organic - ionic liquids solvent for lithium ion batterries. In preliminary expriment it was distinguished that in the mixture of organic solvent lithium hexaflourophosphat has more conductivity in comparison with lithium perchlorate. There for,in this work, all organic-ionic liquid solvent electrolytes are considered based on lithium hexaflourophosphat salt. Different compositions of organic-ionic... 

Li-ion batteries have been widely applied as power sources for portable electronic devices. Recently, Li-ion batteries are considered as the most promising energy storage technology for electric vehicle applications however, fundamental improvements are needed. TiO2 (B) is attractive candidate for anodes in rechargeable Li-ion batteries, due to their low cost, non-toxicity and favorable channel structure for fast lithium mobility. It is predicted that synthesis of doped nanostructure of this material, through reducing the diffusion pathway and formation of crystal defects, will increase the capacity of TiO2(B). In this investigation, Co and V doped TiO2(B) nanowires are synthesized by... 

The operating conditions of the battery in renewable energy systems affect its electrochemical behavior and degradation process. Recent research mainly estimates battery lifetime through conventional methods such as counting the number of equivalent battery life cycles or based on simple experimental models that may lead to optimistic predictions in battery service period. In this study, a reduced-order thermoelectrochemical-aging battery model is developed for the application of renewable energy systems and the battery degradation analysis is investigated by this model. The proposed microscopic model evaluates the effect of battery operating conditions such as state of charge, current and... 

Electrolyte separator is the major component of lithium-ion batteries which the battery safety directly depends on it. In this work, a membrane separator based on the polyvinylidene fluoride (PVdF) was prepared via non-solvent induced phase separation (NIPS) method with water and ethanol as non-solvent and a mixture of dimethylformamide (DMF) and acetone as solvents. The effect of various acetone/DMF ratios and type of non-solvent on the structural, mechanical and electrochemical properties of separator was studied. The separator was characterized by FE-SEM, tensile strength, electrochemical AC-impedance spectroscopy, thermal stability and linear sweep voltammetry (LSV). Additionally, the... 

Electric vehicles and electronics such as laptops and smartphones require an efficient amount of energy conversion and storage. As one of the reliable systems in this field, lithium-ion batteries have high energy density and lower emissions. Cathodic material is a bottleneck in the development of lithium-ion systems due to its high cost and limited energy capacity. In this study, lithium-rich oxide cathode was synthesized in the liquid phase using the co-precipitation synthesis method using six-aqueous nickel nitrate and four-aqueous manganese chloride precursors. The material was analyzed by structural characterization analysis as well as electrochemical characterizations. In this project,... 

One of the problems that affects the lifetime and cycle life of lithium ion batteries is the localized corrosion of aluminum current collector (during the storage and charging cycle). Since applying corrosion-resistant coating has always been one of the ways to reduce corrosion of materials in different environments, in the present project, this method has been used to prevent corrosion of aluminum in lithium-ion batteries. For this purpose, the graphene oxide coating, which has desirable anti-corrosion properties, was coated on aluminum by Electrophoretic deposition and doctor blade methods. linear polarization, cyclic voltammetry and electrochemical impedance spectroscopy were performed to...