Sharif Digital Repository

In this research UHMWPE/CB nanocomposites were prepared via in situ polymerization using Bi-supported Ziegler-Natta catalytic systems. Magnesium etoxide and carbon black were used as supports of catalyst. TiCl4 accompanied by triisobutyl aluminum and diisobutyl phthalate (DIBP) constituted Ziegler-Natta catalytic system. Preparation of catalyst and polymerization were done in slurry phase under the argon atmosphere. Then, structural, thermal and mechanical properties of produced nanocomposites with different CB content were evaluated by SEM, DSC, TGA, DMTA and tensile tests. Scanning Electron Microscopy (SEM) images also certified very good dispersion of CBs throughout PE matrix.... 

In this research UHMWPE/MWCNT nanocomposites with different concentrations of nanotubes (0.5, 1.5, 2.5, 3.5 wt %) were prepared via in situ polymerization using a novel Bi-supported Ziegler-Natta catalytic systems. Magnesium etoxide and Multi wall carbon nanotubes functionalized by hydroxyl groups were used as supports of catalyst. TiCl4 accompanied by triethylaluminum constituted Ziegler-Natta catalytic system. Preparation of catalyst and polymerization were done in slurry phase under the argon atmosphere. Support of catalyst on MWCNT was investigated using Fourier Transform Infrared Spectroscopy (FTIR). The results confirmed interaction between catalyst and hydroxyl groups on the surface... 

In this research UHMWPE/FUMED SILICA nanocomposites with different concentrations of nano fumed silica (0.5, 1.5, 2.5, 4.5 wt %) were prepared via in situ polymerization using a novel Bi-supported Ziegler-Natta catalytic systems. Magnesium etoxide and Fumed Silica functionalized by hydroxyl groups were used as supports of catalyst. TiCl4 accompanied by triethylaluminum constituted Ziegler-Natta catalytic system. Preparation of catalyst and polymerization were done in slurry phase under the argon atmosphere. Scanning Electron Microscopy (SEM) images also certified very good dispersion of fumed silica throughout PE matrix. Intrinsic viscosity measurements showed high molecular weight for... 

The main object of this thesis is preparation and investigation of polyolophine/graphene oxide nanocomposites by using bi-supported Ziegler-Natta catalytic system and in-situ polymerization. Magnesium ethoxide and graphene oxide were used as supports of catalyst. TiCl4 was accompanied by triisobutyl aluminum (tibia) and diisobutyl phthalate (DIBP) as an electron donor constituting Ziegler-Natta catalytic system. Preparation of catalyst and polymerization were taken place in slurry phase under the argon atmosphere. At the beginning of the polymerization experiment, several type of nanocomposites were made under various conditions (such as different Al/Ti molar ratio) to find optimum condition... 

This project is devoted to experimental investigation of increasing on production of polyethylene/clay nanocomposites (PECNs) and polypropylene/clay nanocomposites (PPCNs) via in-situ polymerization method. First of all we produced bi-supported Ziegler-Natta catalyst to polymerized polyolefins nanocomposites. Bentonite type clay and Magnesiumethoxide (Mg (OEt)2) were used as the support of Tetrachloridetitanium (TiCl4). Catalyst support and polymerization process have been done in slurry phase using Triisobutylaluminum (TiBA) as the co-catalyst. The efficiency of preapared bi-supported Ziegler-Natta was reasonably high (average 200 (gr. Product/mmol Ti. h) for PECNs and 195 (gr. Product/mmol... 

The main object of this thesis is production and investigation of polypropylene-fumed silica nanocomposites by using bi-supported Ziegler-natta catalytic system and in-situ polymerization. Magnesium ethoxide and fumed silica were used as supports of catalyst. TiCl4 was accompanied by triisobutyl aluminum(TiBA) and diisobutyl phthalate(DIBP) as electron doner constituting Ziegler-Natta catalytic system. Preparation of catalyst and polymerization were taken place in slurry phase under the argon atmosphere. At the beginning of the polymerization experiment, several type of nanocomposites were made under various conditions(such as different Al/Ti molar ratio) to find optimum condition to... 

In this research polypropylene/carbon nanotube nano composites were prepared via in situ polymerization using Bi-supported Ziegler-Natta catalytic systems. Magnesium etoxide and Multi wall carbon nanotubes(MWCNT) functionalized by hydroxyl groups were used as supports of catalyst. TiCl4 and TiBA were used as catalyst and co catalyst respectively. After defining the polymerization optimum conditions and considering its parameters constant, nano composites with different carbon nanotube contents were produced by changing the polymerization time. Scanning Electron Microscopy (SEM) images certified very good dispersion of MWCNTs throughout polypropylene matrix. The thermal properties behavior of... 

The main object of the presented thesis is manufacturing ultra high molecular weight polyethylene(UHMWPE)/Graphene nanocomposites by insitu polymerization using Ziegler Natta catalysts. In this study, three types of Ziegler Natta Catalysts such as Magnesium ethoxide supported, single-supported and bi-supported have been studied. Experimental conditions are optimized (from point of productivity and molecular weight) by Design expert software with response surface methodology (Box-Behnken design). Effect of process parameters like temperature, pressure and [Al]/[Ti] molar ratio on productivity and Molecular weight are investigated. Also, the effect of hydrogen presence and type of cocatalyst... 

Ultra high molecular weight polyethylene has attracted the attention of numerous researchers and industries. This polymer due to its strong properties can be used in advanced military industries, medical engineering and cases in which high strength and high abrasion resistance is required. Present study aims to fabricate UHMWPE/Molybdenum disulfide composites, using in-situ polymerization. Before carrying out the polymerization process, nanoparticles of molybdenum disulfide underwent various processes such as oxidation, pickling, ultrasonic and thermal shock, in order to increase the interlayer distance and creating functional groups on the surface, then various analyzes, such as XRD, FESEM,... 

The main object of this thesis is synthesizing poly(vinyl acetate)/ colloidal silica nanocomposites via emulsion and in-situ polymerization methods. At the first, nanocomposites were produced in the presence of poly(vinyl alcohol) as the protective colloid, ammonium persulphate as the initiator and sodium bicarbonate as the buffer in an aqueous solution. Then, structural, thermal, rheological, mechanical and surface properties of produced nanocomposites with various colloidal silica content (0.5 %, 1 %, 1.5 %) were evaluated by DLS, FTIR, SEM-EDS, DSC, TGA, dynamic and steady rheological tests, tensile and shear mechanical tests, AFM and static water contact angle. The particle size of... 

Shape memory polymers have the potential to use in the field of biomedical applications. In this research, polyurethane structures have been synthesized based on the Diol mixtures, consisting of polycaprolactane diol (PCL-diol) and poly (lactic acid) diol (PLA-diol). Aim of reasearch is about evaluating poly (lactic acid) effect in structure of the polyurethane. At the same time, cellulose nanocrystals (CNC) have been added to polymer matrix to improve properties. The synthesis of acrylated polyurethane, included the synthesis of polyurethane acrylate prepolymer. Next, this prepolymer has been cured by adding the reactive diluent and some polyol. The cured systems were investigated, finally,...