Sharif Digital Repository

In self-controlling hyperthermia therapy, once the desired temperature is reached, the heat generation ceases and overheating is prevented. In order to design a system that generates sufficient heat without thermal ablation of surrounding healthy tissue, a good understanding of temperature distribution and its change with time is imperative. This study is conducted to extend our understanding about the heat generation and transfer, temperature distribution and temperature rise pattern in the tumor and surrounding tissue during self-controlling magnetic hyperthermia. A model consisting of two concentric spheres that represents the tumor and its surrounding tissue is considered and temperature... 

Magnetic hyperthermia (HT) using biocompatible ceramics is a ground-breaking, competent, and safe thermo-therapeutic strategy for cancer treatment. The magnetic properties of bioceramics, along with their structure and synthesis parameters, are responsible for the controlled heating of malignant tumors and are the key to clinical success. After providing a brief overview of magnetism and its significance in biomedicine, this review deals with materials selection and synthesis methods of bioceramics/glasses used for HT. Relevant research carried out on promising bioceramics for magnetic HT, with a focus on their size, shape, surface functionalization, magnetic field parameters, and in... 

Magnetic hyperthermia (HT) using biocompatible ceramics is a ground-breaking, competent, and safe thermo-therapeutic strategy for cancer treatment. The magnetic properties of bioceramics, along with their structure and synthesis parameters, are responsible for the controlled heating of malignant tumors and are the key to clinical success. After providing a brief overview of magnetism and its significance in biomedicine, this review deals with materials selection and synthesis methods of bioceramics/glasses used for HT. Relevant research carried out on promising bioceramics for magnetic HT, with a focus on their size, shape, surface functionalization, magnetic field parameters, and in... 

Magnetic Nanoparticle Hyperthermia is a new auxiliary technique for cancer treatment, in which the temperature of tumor cells is elevated and maintained to a therapeutic level. Up to now a few researches have been done for Microwave Magnetic Hyperthermia. The authors have studied behavior of MNPs in Microwave field for hyperthermia application. The frequency and power of produced field was 915MHz and 25 Watts. © 2009 Springer-Verlag  

Local hyperthermia is one of the most common methods to treat cancerous tumors, near the skin surface or natural body orifices. In order to study the problem of temperature control during local hyperthermia, firstly the heat conduction process during this therapy is analytically modeled by a time-delayed fractional-order transfer function, parametrized with respect to the body temperature. Since the body temperature may vary under the influence of patient physiological reaction and heat source, a robustness criterion is proposed to achieve the phase margin invariance despite of the temperature variations. Afterwards, an analytical method is proposed to tune stabilizing FO-PI/PD controllers... 

A novel and high potent magnetic nanobiocomposite was prepared based on Carboxymethyl cellulose (CMC) and epichlorohydrin (ECH) cross-linker interactions to form a three-dimensional cross-linked CMC hydrogel followed by silk fibroin (SF) and halloysite nanotubes (HNTs) modifications and further in situ Fe3O4 magnetic nanoparticles (MNPs) formation. Different analytical techniques like FT-IR, EDX, FE-SEM, XRD, TGA, and VSM were used to characterize the structure of the prepared nanobiocomposite. The spherical morphology of Fe3O4 MNPs and tubular HNTs were presented in the FE-SEM images. In biological tests, since the hemolysis percent was even less than the negative control, the CMC... 

Magnetic micelle nanoparticles with thermoresponsive behavior were designed for thermo-triggered paclitaxel delivery. For this purpose, thermoresponsive triblock copolymer poly(N-isopropyl acrylamide)-b-polycaprolactone-b-poly(N-isopropyl acrylamide) was prepared. The magnetic micelle was formed by self-assembly of triblock copolymer on the magnetite which was coated by oleic acid. The size of the magnetic micelle was between 30–40 nm reported by transmission electron microscopy. Also, dynamic light scattering indicated the hydrodynamic diameter was thermal dependent. Moreover, the drug release profile showed thermo-triggered release of paclitaxel. Thus, the smart nanocarrier has potential... 

Magnetic micelle nanoparticles with thermoresponsive behavior were designed for thermo-triggered paclitaxel delivery. For this purpose, thermoresponsive triblock copolymer poly(N-isopropyl acrylamide)-b-polycaprolactone-b-poly(N-isopropyl acrylamide) was prepared. The magnetic micelle was formed by self-assembly of triblock copolymer on the magnetite which was coated by oleic acid. The size of the magnetic micelle was between 30–40 nm reported by transmission electron microscopy. Also, dynamic light scattering indicated the hydrodynamic diameter was thermal dependent. Moreover, the drug release profile showed thermo-triggered release of paclitaxel. Thus, the smart nanocarrier has potential... 

In this research work, graphene/cobalt nanocomposites are functionalized with polyethylene glycol (PEG) to be a platform for theranostics application and antibacterial activity. The non-covalent functionalization of PEG on the surfaces of nanocomposites improved their stability and diminished their cytotoxicity. The PEGylated nanocomposites are demonstrated to allow simultaneous administration of two cancer therapy methods such as magnetic fluids hyperthermia (MFH) which is carried out by converting magnetic energy into heat through ferromagnetic cobalt nanoparticles and heat generation through near-infrared optical absorption by the reduced graphene oxide. A concise simulation is carried... 

Four derivatives of hyaluronic acid (HA) bearing thiol (HA-SH), hydrazide (HA-hy), 2-dithiopyridyl (HA-SSPy), and aldehyde groups (HA-al) respectively were synthesized. Thiol and 2-dithiopyridyl as well as hydrazide and aldehyde make up two chemically orthogonal pairs of chemo-selective functionalities that allow in situ formation of interpenetrating (IPN) disulfide and hydrazone networks simultaneously upon the mixing of the above derivatives at once. The formation of IPN was demonstrated by comparing it with the formulations of the same total HA concentration but lacking one of the reactive components. The hydrogel composed of all four components was characterized by a larger elastic... 

Hyperthermia generally means as increasing the temperature of particular region of body to rise 5 °C above the body's physiological temperature. Here, we investigate the thermal therapy of PEGylated cobalt ferrite nanoparticles prepared by hydrothermal approach on cancerous cell line in the alternative current magnetic field. To characterize of the magnetic nanoparticles (MNPs), scanning electron microscopy, dynamic light scattering, X-ray diffraction, Fourier transform infrared spectroscopy, and vibrating sample magnetometer were used. X-ray diffraction analysis confirmed the spinel phase formation of the MNPs. Cytotoxicity of MNPs using MTT assay on L929 cell lines showed the PEGylated... 

In this research, a facile, two-step synthesis of Fe3O4–LCysteine–graphene quantum dots (GQDs) nanocomposite is reported. This synthesis method comprises the preparation of GQDs via hydrothermal route, which should be conjugated to the LCysteine functionalized core–shell magnetic structure with the core of about 7.5-nm iron oxide nanoparticle and 3.5-nm LCysteine shell. LCysteine, as a biocompatible natural amino acid, was used to link magnetite nanoparticles (MNPs) with GQDs. X-ray powder diffraction, Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, energy dispersive X-ray were used to investigate the presence and formation of MNPs, L Cysteine functionalized MNPs,... 

In this research, a facile, two-step synthesis of Fe3O4–LCysteine–graphene quantum dots (GQDs) nanocomposite is reported. This synthesis method comprises the preparation of GQDs via hydrothermal route, which should be conjugated to the LCysteine functionalized core–shell magnetic structure with the core of about 7.5-nm iron oxide nanoparticle and 3.5-nm LCysteine shell. LCysteine, as a biocompatible natural amino acid, was used to link magnetite nanoparticles (MNPs) with GQDs. X-ray powder diffraction, Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, energy dispersive X-ray were used to investigate the presence and formation of MNPs, L Cysteine functionalized MNPs,... 

Graphene/cobalt nanocomposites are promising materials for theranostic nanomedicine applications, which are defined as the ability to diagnose, provide targeted therapy and monitor the response to the therapy. In this study, the composites were synthesized via chemical method, using graphene oxide as the source material and assembling cobalt nanoparticles of 15 nm over the surface of graphene sheets. Various characterization techniques were then employed to reveal the morphology, size and structure of the nanocomposites, such as X-ray diffraction analysis, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, high resolution transmission electron microscopy and...