Sharif Digital Repository

Submarine pipelines as the principal structural components are prone to fail by circumferential buckling under the effect of hydrostatic external pressure. Basically, the buckling capacity of a thin-walled pipe is dependent on "radius to thickness" ratio. At least two modes of local and overall buckling are possible in any pipeline system, which could be developed in pipe wall. A method of strengthening of pipes is developed in this paper to stop the failure. A total of 21 stiffened models are generated and analyzed using the well-known finite element program ABAQUS. In this study, the buckling and post-buckling behaviour of stiffened pipes are investigated by carrying out linear and... 

It has been known that applying pressure and doping carbon nano-tubes (CNTs) can each affect the behavior of high temperature superconductors. Here, bridging these two effects in order to see how they can interplay, we investigate how the dc resistivity varies in both pure and CNT-doped polycrystalline YBa2Cu3O7-δ (Y-123) compounds under hydrostatic pressure. We demonstrate that the broadening of the resistivity transition in the CNT-doped samples (of 0.7 wt%) is smaller than the undoped samples. In addition, by increasing applied pressure, the doped samples exhibit a higher rate of the increase of the transition temperatures Tcon and Tcmid than the undoped samples. Interestingly as well,... 

The atomic structure of metallic glasses (MGs) plays an important role in their physical and mechanical properties. Numerous molecular dynamics (MD) simulations have been performed to reveal the structure of MGs at the atomic scale. However, the cooling rates utilized in most of the MD simulations (usually on the order of 109-1012 K/s) are too high to allow the structure to relax into the actual structures. In this study, we performed long-term pressurized sub-Tg annealing for up to 1 μs using MD simulation to systematically study the structure evolution of Cu50Zr50 MG. We find that from relaxation to rejuvenation, structural excitation of MGs and transition during sub-Tg annealing depend on... 

The stability of single-walled carbon nanopeapods under hydrostatic pressure is investigated using a continuum-based elastic shell model. The model incorporates nonbonded van der Waals interactions between the nested fullerenes and the host carbon nanotube. By deriving an explicit equation, it is shown that the critical hydrostatic pressure for the onset of structural instability of a completely packed C60@(10,10) nanopeapod is ∼1.11 GPa, while for the case of the pristine host (10,10) nanotube it is ∼1.84 GPa. Thus, it is concluded that the fullerene encapsulation weakens the host nanotube under hydrostatic pressure. In addition, it is quantitatively shown that any decrease in packing... 

One-dimensional nanostructures of tin oxide nanotubes were fabricated by carbothermal evaporation at 900°C in air. The synthesized film was grown on Au-coated (100) Si substrate. Heterogeneous catalysis by Au/Sn droplets assisted the formation of the tin oxide nanotubes of less than 40 nm diameter at Sn vapor pressures around 1.4×10 -7 Pa. In order to reduce the nanotube diameter further, an increase in the Sn vapor pressure by changing the source materials' ratio seemed viable. © 2009 Springer-Verlag  

Sonoluminescence (SL) radiation from an argon bubble in water and in different concentrations of sulfuric acid has numerically been studied to quantify the effects of vapor pressure and viscosity of the liquid on cavitation luminescence in a liquid with controllable vapor pressure and viscosity. For the solutions containing the noble gas with low partial pressure (about 4 Torr), it is shown that there exists an optimum acid solution in which both the temperature and the intensity of SL radiation become maximum. The calculations show that the maximum SL radiation is achieved from the solution of around 65% (wt.) H2 SO4, which is in agreement with available experimental results. © 2009 The... 

In this paper, a new single cone-cap plasticity with an isotropic hardening rule is presented for powder materials. A general form is developed for the cap plasticity, which can be compared with some common double-surface plasticity models proposed for powders in literature. The constitutive elasto-plastic matrix and its components are derived based on the definition of yield surface, hardening parameter and nonlinear elastic behavior, as a function of relative density of powder. Different aspects of the model are illustrated and the procedure for determination of powder parameters is described. Finally, the applicability of the proposed model is demonstrated in numerical simulation of... 

The potential of carbon-based nanosheet membranes with functionalized pores is great as water treatment membranes. Using the molecular dynamic simulation technique, the dimethyl sulfoxide (DMSO) separation from the water/DMSO binary solution is investigated, and the functionalized graphene nanosheets are used as a membrane. This membrane was functionalized by –F (fluorine) and –H (hydrogen) functional groups. For the separation of DMSO, external hydrostatic pressures up to 100 MPa were applied to the considered systems. The separation mechanism was based on molecular size. Multiple analyses were done to study the capability of considered membranes for the separation of DMSO molecules from... 

The aeroelastic flutter characteristics of a functionally graded carbon nanotube reinforced composite (FG-CNTRC) truncated conical shell under simultaneous actions of a hydrostatic pressure and yawed supersonic airflow are scrutinized. The nonlinearity in geometry of the conical shell is considered in Green–Lagrange sense and the model is derived according to the Novozhilov nonlinear shell theory. The aerodynamic pressure is modeled based on the quasi-steady Krumhaar's modified supersonic piston theory by considering the effect of the panel curvature and flow yaw angle. Parametric studies are conducted to investigate the effects of boundary conditions, semi-vertex angle, distribution and... 

Hydrostatic pressure is one of the most fundamental and common mechanical stimuli in the body, playing a critical role in the homeostasis of all organ systems. Kidney function is affected by high blood pressure, namely hypertension, by the increased pressure acting on the glomerular capillary walls. This general effect of hypertension is diagnosed as a chronic disease, but underlying mechanistic causes are still not well understood. This paper reports a portable and adaptive device for studying the effects of hydrostatic pressure on a monolayer of cells. The fabricated device fits within a conventional incubation system and microscope. The effects of various pressures and durations were... 

Hydrostatic pressure is one of the most fundamental and common mechanical stimuli in the body, playing a critical role in the homeostasis of all organ systems. Kidney function is affected by high blood pressure, namely hypertension, by the increased pressure acting on the glomerular capillary walls. This general effect of hypertension is diagnosed as a chronic disease, but underlying mechanistic causes are still not well understood. This paper reports a portable and adaptive device for studying the effects of hydrostatic pressure on a monolayer of cells. The fabricated device fits within a conventional incubation system and microscope. The effects of various pressures and durations were... 

An experimental investigation has been carried out to verify characteristics of pressure fluctuations inside a circular, horizontal and inclined pipeline (90mm inside diameter and 10 m long) carrying two-phase air-water flow in a controlled manner (operating at room temperature and normal pressure). The pressure fluctuation was considered to be due to interaction between the fluid and air bubble compressibility in the pipe. The fluctuating pressure was studied in detail while the flow pattern was mainly slug, wavy or stratified flow. The tests were carried out varying with time, space, water flow rate/air flow rate ratio and pipe inclination. The pressure fluctuations were measured... 

In the present work, the process of equal channel angular pressing of dispersion strengthened Cu-1̇1 wt-%Al2O3 containing nanometric alumina particles was investigated by means of mathematical modelling and experimental testing. Through the modelling, deformation parameters such as hydrostatic pressure distribution and strain field were determined, and the effect of deformation path on these parameters was estimated. Equal channel angular pressing as well as mechanical and microstructural evaluations were also conducted to assess mechanical properties, grain structure and void volume fraction after deformation in different routes. The results indicate that distributions of plastic strain and... 

A new-generation equation of state, perturbed-chain statistical association fluid theory (PC-SAFT), has attracted much attention to modeling the phase behavior of fluids using molecular-based equations of state. A set of three pure component parameters is needed for non-associative compounds, conventionally determined by fitting vapor pressure and liquid density data simultaneously. Unfortunately, experimental data are scarce, and the number of pure substances is too large. Thus, it is indispensable for developing predictive methods to determine the pure component parameters. In the present paper, a new model has been developed to estimate PC-SAFT parameters for different pure components,... 

Mechanical properties of nano-composites produced by shock wave sintering of aluminum and silicon carbide nano-powders are investigated using Molecular Dynamics (MD) simulations. In this regard, the shock wave response of aluminum and silicon carbide nano-particles, arranged in a BCC super-lattice, is studied via the NPHug Hugoniostat method. Moreover, the effect of the initial hydrostatic compaction of powders as well as the cooling rate of the shocked material on the mechanical properties of the shock-sintered nano-composites is investigated. Employing the Hugoniot curves corresponding to the powders, it is concluded that an initial hydrostatic pressure, leads to a less temperature rise...