Sharif Digital Repository

Photovoltaic-electrolyzer systems are one of the most promising alternatives for obtaining hydrogen from a renewable energy source. Determining size and the operational conditions are always a key issue while coupling directly renewable electricity sources to PEM electrolyzer. In this research, the multi objective optimization approach based on an imperialist competitive algorithm (ICA), which is employed to optimize the size and the operating conditions of a directly coupled photovoltaic (PV)-PEM electrolyzer. This allows the optimization of the system by considering two different objectives, including, minimization of energy transfer loss and maximization of hydrogen generation. Multi... 

Xwt% Pt/Al 2 O 3 (X = 1, 3, 5, 8, 10) and 5 wt% Pt-1wt% M/AlO 3 (M = Pd, Rh, Re, Ru, Ir, Cr) catalysts were prepared, characterized and tested for aqueous phase reforming of pure and crude glycerol. Results show drastic dependence of catalytic performance of catalysts on both the active metal loading and the type of applied promoters. 5 wt% was the best Pt loading and Pt[sbnd]Rh/Al₂O₃ shows the best catalytic activity which has the highest hydrogen production rate (mmol/g cat h −1 ) and selectivity (89%) in continuous aqueous phase reforming of 10 wt% pure glycerol solution  

The objective of this study was to construct a novel model to be applied in a general manner to simulate microbial electrochemical cells (MXCs); for both microbial fuel cell (MFC) and microbial electrolysis cell (MEC). The liquid bulk was modeled based on the organic matters degradation to acetate via the anaerobic digestion process. Biofilm simulation was established based upon one-dimensional distribution and the dynamical electron transfer was completed by means of the conduction-based mechanism. We, for the first time, introduced biofilm local potential modeling for MEC simulation with general and simplified linear boundary conditions. The MFC-related part of the model was evaluated... 

Due to the importance of hydrogen as an effective antioxidant for its applications in therapy, this research reports the fabrication of a coupled microfluidic microbial electrochemical cell (MXC), including microfluidic microbial fuel cells (MFCs) and a microfluidic microbial electrolysis cell (MEC) series in order to perform it as a self-powered biohydrogen generator. Being able to be a platform of implantable medical devices, utilization a non-phatogenic strain of Escherichia coli as the biocatalyst in order to exploit the embodied energy from human blood and excrement and finally the use of cheap and facile materials (<$2 per device) are the exceptional features of the system. The... 

In this study, the feasibility of producing power and hydrogen from the waste heat of different City Gate Stations (CGSs) is investigated to select the optimal working conditions. A thermodynamic model is developed for a proposed system combined of the CGS station, the Rankin cycle and the extended hydrogen production cycle. Initially, six CGS stations are simulated based on energy, exergy-economic and environmental analysis and then a comparative study is conducted between different stations. The results of numerical modeling show that the Mashhad-old station with 5315 kW and 31.062 ton/year has the highest amount of power and hydrogen production among other stations, respectively. It is... 

WO3 thin film photoanodes containing different concentrations of Ag nanoparticles were synthesized by solegel method. Based on UV-visible spectra, presence of a surface plasmon resonance peak at 470 nm of wavelength indicated formation of silver nanoparticles in the WO3 films. According to atomic force microscopy (AFM) analysis, the highest value for surface roughness and the effective surface ratio was observed for the sample containing 2 mol% of Ag. X-ray diffraction (XRD) patterns revealed that WO 3 nanocrystalline structure was formed in the monoclinic phase with the average size of about 18.2 nm while Ag nanocrystals were determined in cubic phase. X-ray photoelectron spectroscopy (XPS)... 

This study reports the fabrication of a new cathode electrode assembly using polyaniline (PANI) and graphene on a stainless steel mesh (SSM) as an alternative for the conventional expensive cathode of microbial electrolysis cells (MECs). With respect to the previous efforts to propose an efficient and cost-effective alternative for platinum (Pt) catalysts and cathode electrodes, the present study investigates the assessment of different catalysts to elucidate the potential of the modified SSM cathode electrode for larger-scale MECs. In the case of feeding dairy wastewater to the MEC, the maximum hydrogen production rate and COD removal were obtained by SSM/PANI/graphene cathode and had the...