Loading...
Search for:
hydraulic-engineering
0.007 seconds
Discharge capacity of conventional side weirs in supercritical conditions
, Article 4th European Congress of the International Association of Hydroenvironment engineering and Research, IAHR 2016, 27 July 2016 through 29 July 2016 ; 2016 , Pages 658-664 ; 9781138029774 (ISBN) ; Jalili Ghazizadeh, M. R ; Kabiri Samani, A ; Nekooie, M. A ; Sharif University of Technology
CRC Press/Balkema
2016
Abstract
Side weirs are widely used for level control and flow regulation in hydraulic engineering applications such as irrigation, land drainage, and sewer systems. These hydraulic structures allow a part of the flow to spill laterally when the surface of the flow in the main channel rises above the weir crest. The supercritical flow over a side-weir is a typical case of spatially varied flow with decreasing discharge. This study is aimed at investigating the variations of specific energy along the side-weir using experimental results. Some diagrams have been presented in terms of dimensionless ratio of diverted discharge to total discharge. These diagrams which can be used in the design of side...
Determination of Optimized Position and Orientation of Hydraulic Engine Mounts
, M.Sc. Thesis Sharif University of Technology ; Saadat Foumani, Mahmoud (Supervisor)
Abstract
Reducing noise, vibration and damage to the vehicle's passenger compartment was always a problem that has been investigatedin many researches. Here engine mounts as connecting members between engine and chassis play a big role. Because both of engine and road vibration put on it. Many studies have been done to optimize the engine mounts. As a result, many of hydraulic engine mounts with different variety of system control. But a few researches did about optimization of location and orientation of engine mounts. Therefore this project is to provide a process to optimize the location and orientation of engine mounts. The optimization process is First the dynamic equations of dynamic system are...