Sharif Digital Repository

This is the first research on the nonlinear frequency analysis of a multi-scale hybrid nanocomposite (MHC) disk (MHCD) resting on an elastic foundation subjected to nonlinear temperature gradient and mechanical loading is investigated. The matrix material is reinforced with carbon nanotubes (CNTs) or carbon fibers (CF) at the nano- or macroscale, respectively. We present a modified Halpin–Tsai model to predict the effective properties of the MHCD. The displacement–strain of nonlinear vibration of multi-scale laminated disk via third-order shear deformation theory (TSDT) and using Von Karman nonlinear shell theory is obtained. Hamilton’s principle is employed to establish the governing... 

The hybrid-polymer nanocomposite poly(styrene-methyl methacrylate- acrylic acid) /nanoclay was synthesized by miniemulsion polymerization for novel use as a drilling fluid additive. Three low-solid-drilling fluids (bentonite-based; natural polymer-based; nanoclay-based) were formulated using the hybrid nanocomposite as an additive and their rheological performance compared. The polymer/clay hybrid nanoparticles significantly improve rheological and filtration properties of the drilling fluids and they remain stable at high pressure, high temperature and harsh salinity conditions. The fluids’ filtration properties improve as the concentration of the polymer/nanoclay-hybrid-nanoparticles... 

X-ray diffraction and rheological measurements were used to characterize nanoparticle dispersion in LDPE/LLDPE/nanoclay hybrid nanocomposites. XRD patterns were interpreted with a novel distribution formula and rheological measurements were used to confirm the results. Results of these two methods indicated that increasing clay in all the prepared nanocomposites exhibited a significant improvement in filler-matrix interaction because of increasing the probability of polymer diffusion but further exfoliation need more compatibilizing situations. It seems that this mathematical method could be used for predicting the overall change in clay gallery d-spacing and the extent of... 

Owing to the advantages of nanocomposites for structural applications, we present microstructural evolutions and texture development during dissimilar friction stir welding (DFSW) of an Al-matrix hybrid nanocomposite (Al-2 vol.-% Al2O3-2 vol.-% SiC) with AA1050. It is shown that DFSW can successfully be performed at a rotating speed of 1200 rev min−1 and a transverse speed of 50 mm min−1 while locating the nanocomposite at retreating side. Formation of macro-, micro-, and nano-mechanical interlocks between dissimilar base materials (BMs) as a result of FSW tool stirring action possessed an impact influence on the mechanical performance of dissimilar welds. Electron microscopy revealed... 

In this study, zeolitic imidazolate framework (ZIF-8) as a metal-organic framework (MOF) and its hybrid nanocomposites based on graphene oxide (GO) and carbon nanotubes (CNTs) were synthesized by facile method at an ambient temperature. The sufficiency of GO and CNT substrates as the main components of the composites to grow nanoscale MOFs and increase dispersive forces were investigated. The characteristics of the MOF and hybrid nanocomposites were studied using FTIR, SEM, XRD, BET and TGA techniques. The prepared nanomaterials applied as adsorbents to remove malachite green (MG) as a cationic dye from colored wastewater. The removal rates of the hybrid nanocomposites were greater than that... 

This is the first research on the nonlinear frequency analysis of a multi-scale hybrid nanocomposite (MHC) disk (MHCD) resting on an elastic foundation subjected to nonlinear temperature gradient and mechanical loading is investigated. The matrix material is reinforced with carbon nanotubes (CNTs) or carbon fibers (CF) at the nano- or macroscale, respectively. We present a modified Halpin–Tsai model to predict the effective properties of the MHCD. The displacement–strain of nonlinear vibration of multi-scale laminated disk via third-order shear deformation theory (TSDT) and using Von Karman nonlinear shell theory is obtained. Hamilton’s principle is employed to establish the governing... 

A fine-grained aluminum-matrix hybrid nanocomposite reinforced with TiO2, MgO and Al3Ti nanoparticles was prepared via reactive friction stir processing (FSP) of an Al-Mg sheet with pre-placed TiO2 particles (50nm; 3.1vol%). The microstructure of the hybrid nanocomposite comprises high-angle grain boundaries (~90%) with an average size of 2μm and hard inclusions with sizes in the range of 30-50nm. Evaluation of the hot deformation behavior of the nanocomposite by uniaxial tensile testing at different temperatures (300-450°C) and strain rates (0.001-0.1s-1) shows that the deformation apparent activation energy of the nanocomposite is 137kJmol-1 at ≤300°C. The values of the activation energy... 

In this study, the feasibility of the synthesis of Fe-TiC-Al 2O3 hybrid nanocomposite via mechanical activation followed by carbothermal reduction was investigated. The raw materials including ilmenite, carbon black and aluminum powder were milled in a high energy planetary ball mill. At different time intervals, samples were taken for characterization. After phase evaluation with XRD, some samples were heat treated in an atmosphere controlled tube furnace. Studies proved that increasing the milling time of the raw materials resulted in the formation of more amorphous phase and more active materials. Furthermore, investigations showed that after carbothermal reduction, the synthesized TiC... 

This paper presents experimental results on the fatigue properties of Al-matrix nanocomposites prepared by the friction stir processing (FSP) technique. An Al-Mg alloy (AA5052) with different amounts (∼2 and 3.5 vol%) of pre-placed TiO2 nanoparticles were FSPed up to 6 passes to attain homogenous dispersion of nano-metric inclusions. Microstructural studies by electron microscopic and electron back scattering diffraction (EBSD) techniques showed that nano-metric Al3Ti (50 nm), TiO2 (30 nm), and MgO (50 nm) particles were distributed throughout a fine-grained Al matrix (<2 μm). Consequently, a significant improvement in the tensile strength and hardness was attained. Uniaxial...