Sharif Digital Repository

In this paper, the vibration of a constant thickness circular plate made of functionally graded material (FGM) is controlled by implementing two piezoelectric layers as a sensor and an actuator. Assuming that the material properties of FGM plate vary only in the thickness direction according to the power law manner, the governing differential equations are derived based on the Reissner-Mindlin plate theory (RMPT). Moreover, in a parallel work another set of differential equations are also derived using classical plate theory (CPT). Then for two different kinds of plate boundary conditions these coupled differential equations are solved using separation of variable technique and obtained... 

In this paper, a free vibration analysis of moderately thick circular functionally graded (FG) plate integrated with two thin piezoelectric (PZT4) layers is presented based on Mindlin plate theory. The material properties of the FG core plate are assumed to be graded in the thickness direction, while the distribution of electric potential field along the thickness of piezoelectric layers is simulated by sinusoidal function. The differential equations of motion are solved analytically for two boundary conditions of the plate: clamped edge and simply supported edge. The analytical solution is validated by comparing the obtained resonant frequencies with those of an isotropic host plate. The... 

In this paper, a general analysis of one-dimensional steady-state thermal stresses in a hollow thick cylinder made of functionally graded material is developed. The temperature distribution is assumed to be a function of radius, with general thermal and mechanical boundary conditions along the inside and outside surfaces. The material properties, except Poisson's ratio, are assumed to depend on variable the r and they are expressed as power functions of r. The direct method is used to solve the heat conduction and Navier equations. © 2002 Elsevier Science Ltd. All rights reserved  

An analytical thermoelasticity solution for hollow finite-length cylinders made of functionally graded materials exposed to thermal loads, internal pressure and axial loadings is presented. For this purpose, the governing differential equations of equilibrium are obtained using the principle of minimum total potential energy. A first-order shear deformation shell theory, which accounts for the transverse shear strains and rotations, is considered for expressing displacement field. The governing differential equations are reduced to a set of linear algebraic equations using Fourier expansion series of the displacement field components in the axial coordinate. Subsequently, solution of the... 

The cast-decant-cast is a new method for the preparation of the functionally graded components that has been developed in recent years. The functionally graded cylindrical shape component with a radial gradient, e.g. the first alloy (A390) with high wear resistance on the surface of the piece and toughness and the second alloy (A356) of low machining costs in the core of the piece can be produced via this melt process. The effect of the second alloy superheat at temperatures of 750, 820 and 860 °C as well as the effect of the first alloy solidified layer at 25, 35 and 45 s decanting time on achieving the perfect interface between the two alloys was investigated. The characterization of the... 

This study presents the bending analysis of functionally graded conical panels under transverse compression with various boundary conditions. Equations was derived using first order shear deformation theory (FSDT) and solved using generalized differential quadrature (GDQ) method. Using this method results in the capability of studying any combinations of boundary conditions on four edges of the panel. Results are compared and validated with the results available in the literature. Effect of boundary conditions, volume fractions, panel length, semi-vertex angle and subtended angle on deflection of the panel was investigated  

A size-dependent functionally graded Euler-Bernoulli beam model is developed based on the strain gradient theory, a non-classical theory capable of capturing the size-effect in micro-scaled structures. The governing equation and both classical and non-classical boundary conditions are obtained using variational approach. To develop the new model, the previously used simplifying assumption which considered the length scale parameter to be constant through the thickness is avoided in this work. As a consequence, equivalent length scale parameters are introduced for functionally graded microbeams as functions of the constituents' length scale parameters. Moreover, a generally valid closed-form... 

In the present paper, buckling behavior of a rectangular Functionally Graded Plate (FGP) under combined shear and direct loading is considered. The total potential energy is derived for a FGP in stability condition. Derivation of totalpotential function is based on the classical plate theory. Also, in-plane flexibility is considered in shear buckling analysis. It is assumed that the non-homogeneous mechanical properties of the plate graded through thickness and are described with a power function of the thickness variable. The critical buckling shear loads in conjunction with in-plane direct loads have been obtained for different ratios and power law indices of functionally graded materials... 

Two new displacement potential functions are introduced for the general solution of a three-dimensional piezoelasticity problem for functionally graded transversely isotropic piezoelectric solids. The material properties vary continuously along the axis of symmetry of the medium. The four coupled equilibrium equations in terms of displacements and electric potential are reduced to two decoupled sixth- and second-order linear partial differential equations for the potential functions. The obtained results are verified with two limiting cases: (i) a functionally graded transversely isotropic medium, and (ii) a homogeneous transversely isotropic piezoelectric solid. The simplified relations... 

The free linear vibration of an adaptive sandwich beam consisting of a frequency and field-dependent magnetorheological fluid core and an axially functionally graded constraining layer is investigated. The Euler-Bernoulli and Timoshenko beam theories are utilized for defining the longitudinal and lateral deformation of the sandwich beam. The Rayleigh-Ritz method is used to derive the frequency-dependent eigenvalue problem through the kinetic and strain energy expressions of the sandwich beam. In order to deal with the frequency dependency of the core, the approached complex eigenmodes method is implemented. The validity of the formulation and solution method is confirmed through comparison... 

Free vibration analysis of moderately thick rectangular FG plates on elastic foundation with various combinations of simply supported and clamped boundary conditions are studied. Winkler model is considered to describe the reaction of elastic foundation on the plate. Governing equations of motion are obtained based on the Mindlin plate theory. A semi-analytical solution is presented for the governing equations using the extended Kantorovich method together with infinite power series solution. Results are compared and validated with available results in the literature. Effects of elastic foundation, boundary conditions, material, and geometrical parameters on natural frequencies of the FG... 

In this study, the tractive rolling contact problem between a rigid cylinder and a graded coating is investigated. The main objective of this study is to investigate the effect of the stiffness ratio, the coefficient of friction and the coating thickness on the surface contact tractions, the surface in-plane stress, the stick zone length and the creep ratio parameter that may have a bearing on the fatigue life of the component. Assuming that the shear modulus varies exponentially through the thickness of the coating, the governing integral equations associated with the rolling contact problem are constructed. Furthermore, it is supposed that the contact patch is controlled by a central stick... 

Although many researchers have studied the vibration and buckling behavior of porous materials, the behavior of porous nanobeams is still a needed issue to be studied. This paper is focused on the buckling and nonlinear vibration of functionally graded (FG) porous nanobeam for the first time. Nonlinear Von Kármán strains are put into consideration to study the nonlinear behavior of nanobeam based on the Euler–Bernoulli beam theory. The nonlocal Eringen’s theory is used to study the size effects. The mechanical properties of ceramic and metal are used to model the functionally graded material through thickness, and the boundary conditions are considered as clamped–clamped (CC) and simply... 

In this paper, the nonlinear cylindrical bending of a functionally graded plate is studied. The material properties of the plate are assumed to be graded continuously in the direction of thickness. The variation of the material properties follows a simple power-law distribution in terms of the volume fractions of constituents. The von Karman strains are used to construct the nonlinear equilibrium equations of the plates subjected to in-plane and transverse loadings. The governing equations are reduced to linear differential equation with nonlinear boundary conditions yielding a simple solution procedure. The results show that the functionally graded plates exhibit different behavior from... 

In this article, the propagation of one-dimensional stress waves in a plate made of functionally graded materials excited by a harmonic force is studied. The material properties of the functionally graded material plate are assumed to be graded in the thickness direction according to a power law distribution in terms of the volume fractions of the constituents. The governing equations are based on stress-strain relation and the equation of motion. Keeping generality, the functionally graded material plate is assumed as a multilayer with linear material property in each layer while arbitrary exponential material property through the thickness. A plate made of aluminum and alumina is... 

The fracture problem of a crack in a functionally graded strip with its properties varying in a linear form along the strip thickness under an anti-plane load is considered. The embedded anti-plane crack is located in the middle of strip half way through the thickness. The third mode stress intensity factor is derived using two different methods. In the first method, by employing Fourier integral transforms, the governing equation is converted to a singular integral equation, which is subsequently solved numerically by the collocation method based on Chebyshev polynomials. Then, the problem is solved by means of finite element method in which quadrilateral 8-node singular elements around... 

The effect of axial deformation of shell particles on the dynamic instability (flutter) of cantilevered cylindrical shells made of functionally graded materials (FGM) under an end axial follower force is addressed. To this end, at first, results for free vibration of FGM cylindrical shells were verified with previous outcomes and they were in very good agreement. Then, the effect of axial deformation of the shell, acting like a reducing linearly-distributed follower load, on the critical circumferential mode number and the flutter load of FGM shells was accounted for. Finally, the effect of axial deformation of the shell particles on the critical circumferential mode number and the flutter... 

The performance of perturbation method in nonlinear analyses of plates subjected to mechanical, thermal, and thermo-mechanical loadings is investigated. To this end, cylindrical bending of FG plates with clamped and simply-supported edges is considered. The governing equations of Mindlin's first-order shear deformation theory with von Kármán's geometric nonlinearity are solved using one- and two-parameter perturbation methods and the results are compared with the results of an analytical solution. The material properties are assumed to vary continuously through the thickness of the plate according to a power-law distribution of the volume fraction of the constituents. It is shown that the...