Sharif Digital Repository

The contribution of electrospun nanofibrous membranes (e.NFMs) in the biosensing platforms opens up a new prospect for the invention of faster and more sensitive analytical devices. In this paper, we utilized e.NFM of polyethersulfone (PES) as a solid substrate for the protein immobilization through two different approaches: physical and covalent. Scanning electron microscopy (SEM) and Fourier-transform-infrared (FTIR) tests were performed to study the effect of plasma treatment on protein immobilization efficacy. Moreover, taking advantage of ELISA technique, the influence of different parameters, namely, nanofibers diameter, membrane thickness, plasma treatment time, an incubation time of... 

Polymeric like carbon (PLC) films are grown by a capacitance coupled RF-PECVD on the grounded electrode at room temperature from liquid gas (40% propane and 60% butane) in two regimes with nitrogen and without nitrogen gas. Films are characterized by X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), Fourier transform infrared (FTIR) absorption and Raman spectroscopy. The result of FTIR analyses indicates that more than 90% of hydrogen atoms are bonded to carbon with sp 3 hybridization. The abundance of CH 3 is more than that of CH 2 and this one is more than that of CH for carbon with sp 3 hybridization in these films. The C 1s line of the XPS spectra is deconvoluted to... 

A novel approach was developed to prepare a highly porous hydrogel with superior salt- and pH-resisting properties. According to this method, synthetic comonomers, i.e. acrylic acid (AA) and 2-acrylamido-2-methylpropanesulfonic acid (AMPS), were polymerized and crosslinked in the presence of hydrolyzed collagen as a natural backbone. The characterizations of hydrogels were investigated by swelling experiment, Fourier transform infrared (FT-IR) spectroscopy, acid-base titration and thermogravimetric analysis (TGA). Morphology of the samples was examined by scanning electron microscopy (SEM). Experimental results indicate that the hydrogel has an absorbency of 360 and 73-82 g/g for distilled... 

Eight new chitin derivatives have been synthesized via SN2 reaction of primary and secondary amines with tosylchitin. The products were characterized using FTIR and 1H NMR spectroscopy. A degree of substitution ∼ 1 was achieved through this process. These materials are soluble in water at room temperature, which enable their further applications in the future. © 2007 WILEY-VCH Verlag GmbH & Co. KGaA  

A semi-interpenetrating polymer network (semi-IPN) hydrogel based on kappa-carrageenan (κC) and poly (vinylsulfonic acid, sodium salt) (PVSA) was prepared by graft copolymerization of acrylamide (AAm) using methylenebisacrylamide (MBA) as a crosslinking agent and ammonium persulfate (APS) as an initiator. FTIR spectroscopy was used for confirming the structure of the final product. It was found that the chemical composition of the Semi-IPN hydrogel is equal to the initial homopolymers and monomer feed compositions. The swelling capacity of the hydrogel was shown to be affected by the MBA, APS, and AAm concentration as well as κC/PVSA weight ratio. The swelling behavior of the hydrogel was... 

In the present paper, a novel superabsorbent hydrogel composite based on gelatin have been prepared via graft copolymerization of acrylic acid (AA) in the presence of kaolin powder using methylenebisacrylamide (MBA) as a crosslinking agent and ammonium persulfate (APS) as an initiator. Certain variables of the graft copolymerization (i.e., the monomer, the initiator, and the crosslinker concentration as well as kaolin/gelatin weight ratio) affected on the ultimate water-swelling capacity were optimized. The composite structure was confirmed using Fourier transform infrared (FTIR) spectroscopy. A new absorption band at 1728 cm1 in the composite spectrum confirmed kaolinorganic polymer... 

Gelation time and degradation rate of thermally-sensitive aqueous solutions of chitosan/Gp (glycerophosphate disodium salt) have been studied. The effects of different parameters such as Gp salt concentration, solution temperature, degree of deacetylation of chitosan (DDA) and drug loading on the gelation time have been investigated. Gravimetric analysis, gel permeation chromatography and FTIR spectrophotometry were used to investigate the influence of the DDA and concentration of chitosan solution on hydrogel degradation. The presented results indicated that gelation time decreases by increasing Gp salt concentration, temperature, concentration and DDA of chitosan solutions, while drug... 

This article describes the synthesis and swelling behavior of a superabsorbing hydrogel based on sodium alginate (NaAlg) and polyacrylonitrile (PAN). The physical mixture of NaAlg and PAN was hydrolyzed with a solution of NaOH to yield an alginate-poly(sodium acrylate-co-acrylamide) [Alg-poly(NaAA-co-AAm)] superabsorbent hydrogel. A proposed mechanism for hydrogel formation was suggested, and the structure of the product was established with Fourier transform infrared spectroscopy. The effects of reaction variables were systematically optimized to achieve a hydrogel with a swelling capacity as high as possible. Under the optimized conditions concluded, the maximum capacity of swelling in... 

Hydrogel hybrids were conveniently prepared from alkaline hydrolysis of chitosan-poly(acrylonitrile) mixture under highly practical conditions. The reaction of chitosan alkoxide anions with nitrile groups of poly(acrylonitrile) (PAN) forms crosslinking points and results in a three-dimensional network with superswelling ability in aqueous media. The hydrogel hybrid was identified using FTIR spectroscopy. The PAN content of the hydrolyzing feed affects proportionally the swelling capacity of the hydrogel hybrid. The swelling properties (capacity and rate) of the ampholytic hydrogel were investigated preliminarily. © 2005 Wiley Periodicals, Inc  

A novel superabsorbent composite system based on carboxymethyl cellulose (CMC) was prepared by graft copolymerization of acrylic acid (AA) in the presence of kaolin powder using methylenebisacrylamide (MBA) as a crosslinking agent and ammonium persulfate (APS) as an initiator. The effect of reaction variables, such as MBA, AA, and APS concentration and CMC/kaolin ratio on the water absorbency of the composite were studied. Evidence of grafting and kaolin interaction was obtained by comparing the FT-IR spectra of the initial substrates with that of the superabsorbent composite. The results indicated that with increasing amount of kaolin, the swelling capacity was increased and then... 

The current study revealed the effectiveness of polypropylene (PP) fibers and cement to enhance the strength of black cotton soil. PP fibers and cement with different concentrations were mixed with black cotton soil. The strength of PP fiber and cement-based soil samples was measured in terms of unconfined compressive strength (UCS) and California Bearing ratio (CBR). Specimens for UCS and CBR tests were prepared at 2%, 4%, 6% and 8% of cement (by dry weight of soil) and seven percentages of polypropylene fibers i.e. 0.0%, 0.1%, 0.2%, 0.3%, 0.4%, 0.5% and 0.6% (by dry weight of soil). Fourier transform infrared (FTIR) analysis confirmed the presence of polypropylene and cement contents in... 

The current study revealed the effectiveness of polypropylene (PP) fibers and cement to enhance the strength of black cotton soil. PP fibers and cement with different concentrations were mixed with black cotton soil. The strength of PP fiber and cement-based soil samples was measured in terms of unconfined compressive strength (UCS) and California Bearing ratio (CBR). Specimens for UCS and CBR tests were prepared at 2%, 4%, 6% and 8% of cement (by dry weight of soil) and seven percentages of polypropylene fibers i.e. 0.0%, 0.1%, 0.2%, 0.3%, 0.4%, 0.5% and 0.6% (by dry weight of soil). Fourier transform infrared (FTIR) analysis confirmed the presence of polypropylene and cement contents in... 

Among polymers, polyaniline (PANi) has been introduced as a good candidate for muscle regeneration due to high conductivity and also biocompatibility. Herein, for the first time, we report the use of electrospun nanofibrous membrane of PAN-PANi as efficient scaffold for muscle regeneration. The prepared PAN-PANi electrospun nanofibrous membrane was characterized by scanning electron microscopy (SEM), Attenuated total reflectance fourier transform infrared spectroscopy (ATR-FTIR) and tensile examination. The softer scaffolds of non-composite electrospun nanofibrous PAN govern a higher rate of cell growth in spite of lower differentiation value. On the other hand, PAN-PANi electrospun... 

In the present study, the thermodynamics and mechanisms of vanadium extraction by a mixture of bis-2-ethylhexyl phosphoric acid (D2EHPA) and tri-n butyl phosphate (TBP) from sulfate medium were investigated. It was found that the maximum extraction percent of vanadium occurs at pH 1.8 under ambient conditions; this phenomenon was ascribed to the predominant presence of cationic species of vanadium (VO2+) at this pH. Based on the Fourier Transform Infrared (FT-IR) spectrums, the POH bond of D2EHPA was found responsible for the extraction of VO2+ species through a cationic exchange mechanism. Employing the slope analysis method showed that the stoichiometric reaction... 

Porous silicon samples were obtained from p+- and n-type silicon wafers. Gas sensing measurements showed that the electrical conductivity of porous Si on p+- and n-type wafers increases strongly and decreases weakly in the presence of methanol gas, respectively. Scanning tunneling spectroscopy (STS) indicates that the adsorption of methanol on the surface of n-porous silicon decreases the average density of states especially in the band gap. Fourier transform infrared (FTIR) spectroscopy reveals that after methanol exposure partial surface oxidation occurs which produces electron traps as well as methanol adsorption on the porous surfaces. These observations imply that the number of... 

A comparison of X-ray photoemission spectroscopy of Mg doped Cu0.5Tl0.5Ba2Ca1.5Mg 0.5Cu3O10-δ and Mg free Cu0.5Tl0.5Ba2Ca2Cu 3O10-δ superconductor samples have been made. The main objective of these studies is to see the effect of Mg doping in developing better inter-plane coupling among the CuO2 planes and its effects on the chemical shift of the bonding species. Through these studies it is observed that thallium is in Tl+1 oxidation state in the Cu0.5Tl0.5Ba2O4- δ charge reservoir layer in both Mg doped and Mg free samples, however, the XPS line related to Ba atoms are shifted to higher binding energy side by 0.32 eV in Mg doped sample. This chemical shift is most likely due to presence of... 

Titania was deposited on glass fibers with a partial epoxy layer coating from a solution containing TiO2 nanoparticles at T = 90°C, and the adsorption process was examined by X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), Fourier transform infrared (FT-IR) spectroscopy, and photocatalytic activity measurements. XPS data demonstrated that about 25% of the surface was covered with TiO2 nanoparticles, with 10% on the epoxy layer and 15% on the glass body. It was found that TiO2 nanoparticles can be readily adsorbed on epoxy groups, whereas they have a low tendency to adsorb on carbon polymer chains. This difference can be... 

The most important disadvantage of swinging interferometers is that the optical path difference created in them is a nonlinear function of the rotation angle. In this paper, two new swinging interferometers are presented which have good linearity and provide a larger path difference in response to the rotation angle compared to other interferometers. This makes them suitable for applications such as high-resolution spectroscopy, and precision micro and nanopositioning. In one of these two interferometers, the optical path difference is created by rotation of a system composed of four mirrors, and in the other one it is created by rotation of a system consisting of two mirrors. They are not... 

Synergistic effects of Cyanex 272 mixed with D2EHPA and Cyanex 302 mixed with D2EHPA were investigated for the separation of cobalt and nickel from a dilute sulfate media with the aim of reducing the reagent cost. Selective extraction of cobalt over nickel improved with respect to D2EHPA, but worsened with respect to Cyanex 272. By the application of the slope analysis method, the stoichiometric coefficient of the extractant was found to be four for cobalt and five for nickel, in a mixture of D2EHPA with Cyanex 302. However, it was four for both cobalt and nickel in a mixture of D2EHPA with Cyanex 272. Fourier Transform Infrared Spectroscopy (FT-IR) was utilized to examine the... 

Tetraphenylthiophene diamine (TPTDA) was prepared through a modified three-step route to achieve an improved overall yield. TPTDA reacted with succinic, adipic, suberic, sebasic, and fumaric acids via the Yamazaki phosphorylation method to yield novel partially aromatic polyamides (TPT series). A counterpart polyamide series based on p-phenylene diamine (Ph series) was also synthesized under the same conditions. All of the polymers were characterized by means of spectrochemical (Fourier transform infrared spectroscopy. 1H-nuclear magnetic resonance (NMR), and 13C-NMR) and thermal (differential scanning calorimetry and thermogravimetric) methods of analysis. Solubility of TPT polyamides was...