Sharif Digital Repository

Electron-rich aromatic compounds react with formaldehyde and a secondary amine under solvent-free condition, in the presence of acidic alumina in a commercial microwave oven or at room temperature to produce aminomethylated products in good to excellent yields  

In this study, the performance of the electrical method in MDF wastes recycling was determined. For investigating the practical aspect of the electrical method, the hydrothermal method as a known recycling method was studied too. The recycling process by electrical method conducted for two different time durations (2 and 4 min) at a temperature of 100 °C and recycling using the hydrothermal method was done at a temperature of 105 °C for 150 min under 4 bar pressure with subsequent refining step. Recycled fibers were analyzed by determination of the chemical composition of fibers and fiber classification. After that, laboratory MDF boards with dimensions of 35 × 35 × 12 mm3 and density of... 

A superhydrophobic extractive phase was prepared and packed in a needle trap microextraction device for extraction of volatile organic compounds, followed by their determination by gas chromatography. The superhydrophobic phase was prepared by surface modification of melamine formaldehyde (MF) sponge embedded by reduced graphene oxide (rGO). The overall properties of the modified MF along with its high sorption capacity and low cost fabrication were indicative of its feasibility to be highly suitable for extraction of organic pollutants. The determined water contact angle (>150o) from the surface of melamine formaldehyde–reduced graphene oxide (MF–rGO) revealed its high affinity toward... 

Nutrient disorder and presence of disease-causing agents in soilless media negatively influence the growth of muskmelon. To combat these issues, use of environmentally-friendly sanitation techniques is crucial for increased crop productivity. The study was conducted under greenhouse and field conditions to investigate the effect of two different sanitation techniques: steaming and formalin fumigation on various media’s characteristics and their impact on muskmelon yield. Media: jantar, guar, wheat straw and rice hull and peat moss of 10% air-filled porosity and sanitized with formalin and steaming. Steaming of guar, jantar, and wheat straw increased the phosphorus (P) and potassium (K)... 

A solvent-free procedure for the synthesis of several 1-aryl-2-(dialkylaminomethyl)-prop-2-en-1-ones 3 (a-e) and 4 (a-e) is reported. Reaction of arylmethyl ketones with formaldehyde and dialkylamines, such as diethyl- or dibutylamines at room temperature in silica gel produce 3 and 4 with moderate yields  

The objective of this study is the investigation of formaldehyde degradation in a bioreactor with pumice stone as a support. The reactor was tested at different synthetic wastewater concentrations with total COD of 500, 1000 and 1500 mgL, respectively, at 24 h hydraulic retention time. The effect of feed composition was tested by changing the COD TCOD FA ratio in order to analyze the impact of formaldehyde concentration. The average formaldehyde and COD removal efficiencies obtained in the reactor were 97.1% and 88%, respectively. The maximum COD and formaldehyde removal efficiencies occurred at the COD TCOD F of 41 at COD T=1000mgL. The effect of toxic shock on reactor performance was... 

An immersed single drop microextraction (SDME) method was successfully developed for the trace enrichment of formaldehyde from DTP and DT vaccines and diphtheria-tetanus antigen. The formaldehyde was derivatized by means of the Hantzsch reaction. The dehydropyridine derivative was extracted into a microdrop of chloroform that suspended in a 4 ml sample solution for a preset time. The microdrop was then retracted into the microsyringe and injected directly into a gas chromatography-mass spectrometry (GC-MS) injection port. Effects of different parameters such as the type of solvent, extraction time, stirring rate, and temperature were studied and optimized. The limit of detection was 0.22... 

Composites of phenol-formaldehyde (PF) resin with Closite Na+ and Closite 30B up to 20 wt% loadings were prepared by solution mixing. Tensile testing showed that both pristine and organically modified clays increased considerably the mechanical properties of PF resin at 2.5 wt% loading followed by marginal improvement or even sacrificed properties at high loadings. DMA and DSC analyses suggested development of a highly crosslinked and well adhered interphase around silicate layers. A novel three-phase model considering the interphase region was proposed to predict composite modulus. The model was successfully employed to correlate morphological characteristics and mechanical properties of... 

Superhydrophobic materials have attracted many attentions in recent years while their application in sample preparation remained almost intact. In this project, a rough surface of melamine formaldehyde foam was silanized by chemical deposition of trichloromethylsilane to form a highly porous and superhydrophobic material, presumably a suitable medium for extracting non–polar compounds such as benzene and its methyl derivatives. The prepared sorbent was packed in a needle for the headspace needle–trap microextraction of benzene, toluene, ethylbenzene and xylenes (BTEX). Major parameters associated with the extraction/desorption processes were considered for optimization. Under the optimized... 

An attempt was made to combine μ-solid phase extraction and headspace single drop microextraction techniques and use their advantages for trace determination of some volatile organic compounds in aqueous samples. After performing the two-step preconcentration approach, the desired analytes were determined by gas chromatography-mass spectrometry. A resorcinol-formaldehyde-based xerogel was used as the extraction medium in the μ-solid phase extraction (μ-SPE) method. Then, the extracted BTEX was eluted with a rather large amount of methanol. To remove the laborious process including solvent evaporation and further reconstitution, which is usually accompanied by loss of analytes and accuracy,... 

Despite tremendous efforts toward vaccination, influenza remains an ongoing global threat. The induction of strain-specific neutralizing antibody responses is a common phenomenon during vaccination with the current inactivated influenza vaccines, so the protective effect of these vaccines is mostly strain-specific. There is an essential need for the development of next-generation vaccines, with a broad range of immunogenicity against antigenically drifted or shifted influenza viruses. Here, we evaluate the potential of whole inactivated vaccines, based on chemical and physical methods, as well as new approaches to generate cross-protective immune responses. We also consider the mechanisms by... 

In this study, organic aerogels were synthesized by the sol-gel polycondensation of mixed cresol with formaldehyde in a slightly basic aqueous solution. Carbon aerogels and xerogels are generated by pyrolysis of organic aerogels. The novel sol-gel-based micro-solid-phase extraction sorbent, resorcinol-formaldehyde xerogel, was employed for preconcentration of some selected herbicides. Three herbicides of the aryloxyphenoxypropionate group, clodinafop-propargyl, haloxyfop-etotyl, and fenoxaprop-P-ethyl, were extracted from aqueous samples by micro-solid-phase extraction and subsequently determined by gas chromatography with mass spectrometry. The effect of different parameters influencing the... 

In this research, a new approach for extraction and determination of polycyclic aromatic hydrocarbons from sea and rain water samples was developed by implementing a superhydrophobic substrate and consuming the least amount of solvent. This version of solvent–supported microextraction enabled us to perform the procedure in the immersion mode with the slightest troubles arising from water leakage into the gas chromatography. The superhydrophobic property leads to the fixation of extracting solvent on the substrate surface during water sampling. To prepare a superhydrophobic substrate, a piece of melamine foam was coated by tannic acid and silica nanoparticles using methyltrimethoxysilane and...