Sharif Digital Repository

The use of Near-surface Mounted (NSM) FRP bars is an efficient strengthening technique to enhance the flexural strength of RC structures. This article is intended to analytically investigate the effectiveness of Glass Fiber Reinforced Polymer (GFRP) bars in combination with GFRP wraps on the flexural capacity of reinforced concrete (RC) columns with Fiber Element Modeling approach. The accuracy and reliability of the proposed fiber-based modeling method is demonstrated by numerical models on seven half-scale experimental RC reference columns under axial and cyclic lateral loads. These reference specimens are comprised of seven half-scale RC columns including two unstrengthened and five... 

An experimental study of the. flexural behavior of Reinforced-Concrete (RC) arches strengthened with Glass Fiber-Reinforced Polymer (GFRP) layers was performed. A total of 36 specimens including 3 un-strengthenod (control) and 33 strengthened RC arches were tested under centrally concentrated point load. The variables of this study were steel reinforcement ratio, number of GFRP layers, and location and arrangement of GFRP layers. Failure mode, load-displacement response of specimens, crack propagation patterns, and GFRP debonding were examined. The extrados strengthening method was shown to Ix1 more effective than the intrados strengthening one in improving the failure load and rigidity of... 

This article is intended to highlight the effectiveness of longitudinal Glass Fiber Reinforced Polymer (GFRP) bars in combination with GFRP sheets on the flexural capacity of Reinforced Concrete (RC) columns. Seven half-scale RC columns including five strengthened and two control unstrengthened specimens were experimentally tested under axial and cyclic lateral loads. The strengthened columns with two different longitudinal GFRP bar ratios were tested under three different axial load levels. The flexural strength and ductility parameters of the specimens were calculated by obtaining their deformations and measuring the loads from load cells. The experimental results indicate significant... 

An experimental study of the. flexural behavior of Reinforced-Concrete (RC) arches strengthened with Glass Fiber-Reinforced Polymer (GFRP) layers was performed. A total of 36 specimens including 3 un-strengthenod (control) and 33 strengthened RC arches were tested under centrally concentrated point load. The variables of this study were steel reinforcement ratio, number of GFRP layers, and location and arrangement of GFRP layers. Failure mode, load-displacement response of specimens, crack propagation patterns, and GFRP debonding were examined. The extrados strengthening method was shown to Ix1 more effective than the intrados strengthening one in improving the failure load and rigidity of... 

Timber is one of the materials widely used in construction and industry all over the world. In this paper, the behavior of strengthened timber beams made of beech wood (Fagus orientalis) were investigated experimentally. The composite timber beams were reinforced with flat, U-shaped, and L-shaped pultruded Glass Fiber Reinforced Polymer (GFRP) profiles. The GFRPs were attached to tensile or both tensile and compressive surfaces of beams. Altogether, 24 specimens, including 20 strengthened beams and 4 un-strengthened (control) beams, were tested under three-point bending test. Flexural behavior of specimens was evaluated through their load versus mid-span displacement curves, ultimate load...