Sharif Digital Repository

A manganese(III) complex, [Mn(phox)2(CH3OH) 2]ClO4 (phox = 2-(2′-hydroxyphenyl)oxazoline), was immobilized on silica-coated magnetic Fe3O4 nanoparticles through the amino propyl linkage using a grafting process in dichloromethane. The resulting Fe3O4@SiO2-NH2@Mn(III) nanoparticles are used as efficient and recyclable catalysts for selective oxidation of thiols to disulfides using urea-hydrogen peroxide as the oxidant. The nanocatalyst was recycled several times. Leaching and recycling experiments revealed that the nanocatalyst can be recovered, recycled, and reused more than five times, without the loss of catalytic activity and magnetic properties. The recycling of the nanocatalyst in six... 

Di-(2-ethylhexyl) phosphoric acid coated silanized magnetite nanoparticles were applied for the rapid removal and fast adsorption of molybdenum ions from simulated nitric acid solutions. The characterization of the developed adsorbent was carried out using various analytical techniques such as Transmission electron microscopy (TEM), X-ray diffraction pattern (XRD) and Fourier transform infrared spectroscopy (FT-IR). The Transmission electron microscopy photographs showed that the silanized magnetite nanoparticles were roughly spherical in shape and the average size of these particles is very close to the average size of bare magnetite particles. The binding of silane polymer and... 

The magnetic response of a polyamide nanocomposite membrane under applying a magnetic field has been modeled to evaluate elastic deformation order of magnitude. A PA-Fe3O4 nanocomposite membrane is considered to be modeled under influence of volume plane stress caused by a magnetic field. The modeling of the mechanical behavior of Fe3O4-PA nanocomposite membrane suggests that nanoparticle displacements within the nanocomposite, in the order of 200 nm under applying an external magnetic field, are greater than free volumes or porosities of the polyamide membrane. The membrane can be excited to mechanically vibrate by applying an alternating magnetic field lower than 0.1 T. As the results... 

The present research was aimed at simultaneous increase in strength and fracture energy of friction stir spot weld of Al-5083 alloy via reinforcing by Fe3O4 nanoparticles. Compared to non-reinforced welds, failure load and fracture energy of reinforced welds increased up to ∼115 and 560%, respectively. These findings were discussed in the light of grain refinement as well as considerable increase in hardness of fracture location due to the presence of sub-micron and nano reinforcing particles (RPs). Fe3O4 nanoparticles were transformed to Al–Fe intermetallics due to their small size and heat generated during the welding process. The stir zone of reinforced welds consisted of three different... 

An extracting medium based on chitosan-polypyrrole (CS-PPy) magnetic nanocomposite was synthesized by chemical polymerization of pyrrole at the presence of chitosan magnetic nanoparticles (CS-MNPs) for micro-solid phase extraction. In this work, magnetic nanoparticles, the modified CS-MNPs and different types of CS-PPy magnetic nanocomposites were synthesized. Extraction efficiency of the CS-PPy magnetic nanocomposite was compared with the CS-MNPs and Fe3O4 nanoparticles for the determination of naproxen in aqueous samples, via quantification by spectrofluorimetry. The scanning electron microscopy images obtained from all the prepared nanocomposites revealed that the CS-PPy magnetic... 

In the past few years, laser-assisted methods have greatly influenced biomedical studies due to less invasive ways of treatment and higher precision. New stimuli-responsive drug carriers are still explored by scientists to achieve a better spatiotemporal control of drug carriers by using visible to NIR light instead of phototoxic ultra-violet irradiation. Due to their biocompatibility and high loading capacity of hydrophilic drugs, hydrogels have been used extensively in this area. However, poor cellular uptake and restricted loading of hydrophobic drugs are challenges that should be addressed. In this study, a previously known nanogel system based on chitosan and poly(N-isopropylacrylamide)... 

Chondroitinase ABCI (cABCI) is a drug enzyme that can be used to treat spinal cord injuries. Due to low thermal stability of cABCI, this enzyme was immobilized on Fe3O4 nanoparticle to increase its thermal stability. The size and morphology, structure and magnetic property of the Fe3O4 nanoparticles were characterized by the analyses of SEM, XRD and VSM, respectively, and FTIR spectroscopy was employed to confirm the immobilization of cABCI on the surface of Fe3O4 nanoparticles. The results indicated that the optimum conditions for pH, temperature, cABCI-to-Fe3O4 mass ratio and incubation time in immobilization process were 6.5, 15 °C, 0.75 and 4.5 h, respectively, and about 0.037 mg cABCI... 

Magnetite nanoparticles (mean particle size ranging from 10 to 20 nm) were prepared by a biomoleculeassisted solution-phase approach under ultrasonic irradiation. Cysteine was used as the capping agent in the solution. The results show that cysteine could be an efficient biocapping agent in producing Fe3O4 nanoparticles. The crystal structure and magnetic properties of the nanoparticles were characterized by XRD and VSM techniques, respectively. FT-IR was used to investigate the presence of cysteine on the nanoparticles surface. The influence of pH value of the solution on the size distribution and hydrodynamic size of nanoparticles were studied by TEM and DLS methods, respectively. The MTT... 

The objective of this study was to model the extent of improvement in the degradability of phenol dyes by SnO2/Fe3O4 nanoparticles using a photocatalytic reactor. The effect of operative parameters including catalyst concentration, initial dye concentration, stirring intensity, and UV radiation intensity on the photocatalytic batch reactor during removal of phenol red was investigated. Fractional factorial design and response surface methodology were used to design the experiment layout. The SnO2/Fe3O4 nanoparticles were synthesized using the core-shell method. The results of x-ray diffraction and transmission electron microscopy showed the successful synthesis of these nanoparticles. The... 

In this study, magnetic nanoparticles (MNPs) were synthesized via co-precipitation method. To enhance the biocompatibility and colloidal stability of the synthesized nanoparticles, they were modified with carboxyl functionalized PEG via dopamine (DPA) linker. Both modified and unmodified Fe3O4 nanoparticles exhibited super paramagnetic behavior (particle size below 20 nm). The saturation magnetization (Ms) of PEGdiacid-modified Fe3O4 was 45 emu/g, which was less than the unmodified Fe3O4 nanoparticles (70 emu/g). This difference indicated that PEGdiacid polymer was immobilized on the surface of Fe3O4 nanoparticles successfully. To evaluate the efficiency of the resulting nanoparticles as... 

In this study, a new type of magnetite nanocomposite with a core–shell structure was synthesized using Fe3O4 nanoparticles as a core and polyaniline (PANI) as a shell. For this propose, the surface of Fe3O4 was chemically modified with hexamethylenediisocyanate (HMDI) to improve its compatibility and interphase interaction with the polymeric matrix. Thereafter, the PANI was reacted with modified Fe3O4 to anchor them to PANI by covalent bands which acted as a shell. In the second step, the poly (maleic acid-co-acrylic acid) (P(MAc-co-AA)) as polymeric dopant for the PANI was synthesized. Finally, the PANI anchored to Fe3O4 was immersed in an aqueous solution of poly (maleic... 

A magnetic nanocomposite was prepared by entrapment of Fe3O4 nanoparticles into the cross-linked ionic liquid/epoxy type polymer. The resulting support was used for covalent immobilization of cellulase through the reaction with epoxy groups. The ionic surface of the support improved the adsorption of enzyme, and a large amount of enzyme (106.1 mg/g) was loaded onto the support surface. The effect of the presence of ionic monomer and covalent binding of enzyme was also investigated. The structure of support was characterized by various instruments such as FT-IR, TGA, VSM, XRD, TEM, SEM, and DLS. The activity and stability of immobilized cellulase were investigated in the prepared support. The... 

The control of thin film nanocomposite (TFN) membranes cross-linking degree is an important factor to design new membranes and optimizing permeation characteristics. The Fe3O4 nanoparticle's based TFN membranes due to potentially added magnetic responsive properties to the membrane has a great importance in developing membrane architectures. Fe3O4/polyamide (PA) TFN membranes filled with nanoparticles in different sizes and concentrations have been synthesized. Cross-linking degree of PA layer characterized with Fourier transform spectroscopy (FTIR) and x-ray photoelectron spectroscopy (XPS) methods to evaluate size dependency of the cross-linking degree of PA layer network. Obvious... 

In this study Fe3O4/CMC magnetic nanoparticles were synthesized through co-precipitation method. Afterward, laccase from Trametes hirsuta was immobilized onto Carboxymethyl cellulose (CMC)-coated magnetic Fe3O4 nanoparticles by covalent bonding between carboxyl groups of carboxymethyl cellulose and amine group of laccases. Also, the resulted magnetic nanoparticles and immobilized laccase were characterized by Fourier-transform infrared spectroscopy (FTIR), scanning electron microscope (SEM) and dynamic light scattering (DLS) analysis. Moreover, the vital factors in enzyme immobilization, such as contact time, amount of N-hydroxysuccinimide (NHS), and the amount of nanoparticles were... 

Metal-organic frameworks (MOFs) are a new class of porous crystalline materials being used as photocatalysts for efficient pollutant removal and environmental remediation. In this study, the TMU-32 MOF was synthesized as an effective photocatalyst for the photodegradation of tetracycline (TC) with 96% efficiency in 60 min under visible light. The high photocatalytic activity of the TMU-32 MOF is mainly due to its large specific surface area, which is beneficial for promoting both the adsorption of TC and the separation of the photoinduced charges. Moreover, its desired crystallinity makes it a semiconductor with an appropriate band gap energy. Next, a composite of the TMU-32 MOF with Fe3O4... 

Metal-organic frameworks (MOFs) are a new class of porous crystalline materials being used as photocatalysts for efficient pollutant removal and environmental remediation. In this study, the TMU-32 MOF was synthesized as an effective photocatalyst for the photodegradation of tetracycline (TC) with 96% efficiency in 60 min under visible light. The high photocatalytic activity of the TMU-32 MOF is mainly due to its large specific surface area, which is beneficial for promoting both the adsorption of TC and the separation of the photoinduced charges. Moreover, its desired crystallinity makes it a semiconductor with an appropriate band gap energy. Next, a composite of the TMU-32 MOF with Fe3O4... 

In the present study, the hybrid reinforcements (Fe3O4–SiC) novel composite has been successfully fabricated by powder metallurgy method. Adding Fe3O4 nanoparticles and SiC hybrid reinforcements in the aluminium matrix, improved the magnetic permeability of aluminium matrix composites as well as, thermal properties without mechanical degradation. In this study, the aim was to define the influence of SiC–Fe3O4 nanoparticles on microstructural, thermal, electrical, and magnetic properties of the composite. Based on obtained results, the highest density and hardness is 2.72 g/cm3 and 93 HV respectively. Adding (10–30 wt% SiC) into Al–15Fe3O4 slightly improved the magnetic saturation from... 

In the present study, first, Fe3O4nanoparticles were functionalized using glutaric acid and then composited with CQDs. Doxorubicin (DOX) drug was loaded to evaluate the performance of the nanocomposite for targeted drug delivery applications. The XRD pattern confirmed the presence of characteristic peaks of CQDs and Fe3O4. In the FTIR spectrum, the presence of carboxyl functional groups on Fe3O4/CQDs was observed; DOX (positive charge) is loaded onto Fe3O4/CQDs (negative charge) by electrostatic absorption. FESEM and AFM images showed that the particle sizes of Fe3O4and CQDs were 23-75 and 1-3 nm, respectively. The hysteresis curves showed superparamagnetic properties for Fe3O4and Fe3O4/CQDs... 

An investigation into the addition of different weight percentages of Fe3O4 nanoparticles to find the optimum wt.% and its effect on the microstructure, thermal, magnetic, and electrical properties of aluminum matrix composite was conducted using the powder metallurgy method. The purpose of this research was to develop magnetic properties in aluminum. Based on the obtained results, the value of density, hardness, and saturation magnetization (Ms) from 2.33 g/cm3, 43 HV and 2.49 emu/g for Al-10 Fe3O4 reached a maximum value of 3.29 g/cm3, 47 HV and 13.06 emu/g for the Al-35 Fe3O4 which showed an improvement of 41.2%, 9.3%, and 424.5%, respectively. The maximum and minimum coercivity (Hc) was... 

A novel colorimetric nanosensor is reported for the selective and sensitive determination of cysteine using magnetic-sulfur, nitrogen graphene quantum dots (Fe3O4/S, N-GQDs), and gold nanoparticles (Au NPs). Thus, S, N-GQDs was firstly immobilized on Fe3O4 nanoparticles through its magnetization in the presence of Fe3+ in the alkali solution. The prepared Fe3O4/S, N-GQDs were dispersed in cysteine solution resulting in its quick adsorption on the surface of the Fe3O4/S, N-GQDs through hydrogen bonding interaction. Then, Au NPs solution was added to this mixture that after a short time, the color of Au NPs changed from red to blue, the intensity of surface plasmon resonance peak of Au NPs at...