Sharif Digital Repository

One of the miscellaneous units that are frequently used in water and wastewater systems is flush tank. Flush tank increases the self cleaning velocity in the conduit, and helps to clear the conduits from deposits and contaminations. While these units have been used for many years, there is not enough information about the hydraulic performance of these units in respect to the discharge, distance from the tank and the pipe hydraulics. In this paper the experimental results from observed hydrographs at different distances from the flush tank in a pipe has been presented. The variables include; volume of releasing water (or inlet hydrograph), upstream head, pipe diameter (3 cm), pipe length and... 

Biofiltration is a commonlypracticed biological technique to remove volatile compounds from waste gas streams. From an industrial view-point, biofilter (BF) operation should be flexible to handle temperatures and inlet load (IL) variations. A compost BF was operated at different temperatures (30-45°C) and at various inlet loading rates (ILR; 8-598gm -3h -1) under intermittent loading conditions. Complete removal of n-hexane was observed at 30 and 35°C at ILRs up to 330gm -3h -1. Besides, 20-75% of the pollutant was removed at 40°C, corresponding to the different ILs applied to the BF. Increasing the temperature to 45°C decreased the removal efficiency (RE) significantly. A feed forward... 

In common solar stills, a portion of the produced vapor undesirably condenses on the sidewalls and runs down to be mixed with saline water in the basin. This results in lower distillate output of the system. The aim of this study was to improve the condensation process of a solar still without complicating its structure to collect the water condensed on sidewalls. The proposed solar still was made of two containers nested one inside the other such that the smaller container, containing saline water, fitted easily into the larger container. There was a thin gap between the two in which condensed liquid on sidewalls, ran down and was collected from the bottom of the larger container. The... 

To evaluate the propulsion system capabilities of a Flapping Micro Air Vehicle (FMAV), a new aeroelastic model of a typical flexible FMAV is developed, utilizing the Euler-Bernoulli torsion beam and quasi steady aerodynamic model. The new model accounts for all existing complex interactions between the mass, inertia, elastic properties, aerodynamic loading, flapping amplitude and frequency of the FMAV, as well as the effects of several geometric and design parameters. To validate the proposed theoretical model, a typical FMAV, as well as an instrumented test stand for the online measurement of forces, flapping angle and power consumption, has been constructed. The experimental results are... 

Although concrete armour units have traditionally been used in two layers, the application of single-layer armour has attracted more attention in recent years because of its lower concrete volume and faster construction pace. Single-layer amour relies mainly on the contact between units to provide stability; however, installation of special armour types with surface projections for better interlocking, increases the possibility of breakage. During the last decade the idea of using bulky armour units such as cubes has been raised, and the application of these single-layer armour units has become common for high-crested breakwaters. However, the application of cube armours for low-crested... 

In this paper, copper oxide nanoparticle was synthesized, and its surface was modified using N-(2-aminoethyl)-3-(trimethoxysilyl)propylamine. The bi-amino surface functionalized nanoparticle (BASFN) was used to remove anionic dyes from single and binary systems. The scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, energy-dispersive X-ray spectroscopy (EDAX) and X-ray diffraction were used to characterize the nanoparticle. Direct Red 80 (DR80) and Direct Green 6 (DG6) were used as anionic dyes. The effect of adsorbent dosage, dye concentration and pH on dye removal was evaluated. Kinetic of dye adsorption on BASFN followed pseudo-second order. The results... 

In this paper the performance characteristics of a turbocharger twin-entry radial inflow gas turbine with asymmetrical volute and rotor tip diameter of 73.6 mm in steady state and under full and partial admission conditions are investigated. The employed method is based on one dimensional performance prediction which is developed for partial admission conditions. Furthermore, this method is developed for the asymmetrical volute of the turbine considering the flow specifications. Experimental investigation of the research was carried out on special test facilities under full and partial admission conditions for a wide range of speeds. A comparison of experimental and modeling results shows... 

A plunge pool is one of the energy dissipater structures for high head dams, which ensures stability of the dam under extreme hydrodynamic pressure, due to falling jet impacts. The excess energy of the jet is dissipated, together with significant impact pressure exerted on the floor and pool walls. Thus, appropriate assessment of jet dynamic characteristics in the plunge pool is essential. This research presents experimental results focusing on. the distribution of mean and extreme pressure fluctuations on the sidewalls, due to circular and rectangular plunging jets, and the effects of pool dimension, especially in narrow valleys. The experimental variables are discharge, geometry of jet,...