Sharif Digital Repository

Finesmigration is a noticeable problem in petroleum-production engineering. Plugging of throats in porous media occurs because of detachment of fine particles from sand surfaces. Thus, the study of interactions between fines and pore surfaces and the investigation of governing forces are important factors to consider when describing the mechanism of the fines-release process. The main types of these forces are electric double-layer repulsion (DLR) and London-van der Waals attraction (LVA). It may be possible to alter these forces with nanoparticles (NPs) as surface coatings. In comparison with repulsion forces, NPs increase the effect of attraction forces. In this paper, we present new... 

In this study, a particular nickel-based superalloy has been studied by transmission electron microscopy and the results are discussed in terms of phase transformations that may have taken place. The alloy has been found to consist of three major phases; a FCC γ phase containing a random distribution of nearly spherical γ′ - Ni3Al(Ti) - precipitates and elongated thin Ni3Ti(Ta) platelets with a hexagonal structure. The orientation relationships between the different phases have been determined; loss of coherency and possible occurrence of misfit-relieving interfacial dislocations are discussed and compared with experimental observations, and possible mechanisms of phase transformations are... 

The electrohydrodynamic (EHD) vortices produced by an electric current in freely suspended liquid crystal (LC) films of N-(4-methoxybenzylidene)-4- butylaniline (MBBA), convert to a pure rotation in the presence of external electric field (E ext) perpendicular to the current direction. Here, the direction and strength of the rotation are precisely under control by our self-made device called "liquid-film motor". In this paper, we present experimental observations of the EHD fluid flow when external electric field varies from zero to a value in which pure rotation on the liquid crystal (LC) film is observed. We also show experimentally that the presence of external electric field causes a... 

A coupled cellular automata and finite element model has been proposed to evaluate static recrystallization kinetics during non-isothermal annealing of cold deformed low carbon steels. The effects of various factors including heating rate, annealing temperature, and initial microstructures have been considered in the model to accurately predict the static recrystallization kinetics and the final microstructures. In order to examine the employed algorithm, the predicted results have been compared with the experimental observations and a good agreement was found between the two sets of results  

This paper investigates the deflection and static pull-in voltage of microcantilevers based on the modified couple stress theory, a non-classic continuum theory capable to predict the size effects for structures in micron and sub-micron scales. It is shown that the couple stress theory can remove the gap between the experimental observations and the classical theory based simulations for the static pull-in voltage  

In this work, softening kinetics after cold rolling has been simulated using a coupled finite element-cellular automata model. Firstly, a two-dimensional rigid plastic finite element analysis has been developed to assess strain field and the stored energy accumulation during cold rolling as well as the initial condition of the mesoscopic model. Then, the cellular automata scheme has been employed to calculate the progress of static recrystallization at a given temperature while a dislocation-base model was simultaneously utilized to consider the effect of recovery on static softening process and final microstructures. The model has been examined on isothermal annealing of cold rolled AA5052... 

In the presence of self and cross saturation effects, the laser governing equations are nonlinear. To solve the governing equations of a fiber Bragg grating random laser, on the basis of the transfer matrix method, a simple and fast iterative method is introduced. The method is employed to obtain the frequency, threshold pumping rate and spatial distribution of different laser modes. Numerical calculations show that by increasing the number of fiber Bragg grating, the number of lasing modes increases, while the threshold pumping rate of the first mode decreases. Our theoretical results are in agreement with the experimental observations reported by previous authors  

Higher-order effects in three-wave resonant interaction of a surface wave, with a pair of interfacial waves in a two-layer fluid, are studied theoretically. Following an initial rapid growth, the interfacial waves approach a steady state of constant amplitude. An explicit solution is presented for transition to the ultimate state of the interaction. It is shown that for interaction in a wave flume, it is necessary to include a 2nd pair of the interfacial waves, resulting from a reflection of the original pair in the analysis. The effects of different parameters on the dynamics of the interaction are investigated. The results indicate that a faster initial growth does not necessarily lead to... 

In this study, neural network models have been used to predict the mechanical behaviors of mouse embryos. In addition, sensitivity analysis has been carried out to investigate the influence of the significance of input parameters on the mechanical behavior of mouse embryos. In order to reach these purposes two neural network models have been implemented. Experimental data earlier deduced-by [Flückiger, M. (2004). Cell Membrane Mechanical Modeling for Microrobotic Cell Manipulation. Diploma Thesis, ETHZ Swiss Federal Institute of Technology, Zurich, WS03/04]-were collected to obtain training and test data for the neural network. The results of these investigations show that the correlation... 

In this research, thermo-mechanical behavior and microstructural events in dissimilar friction stir welding of AA6061-T6 and AA5086-O have been evaluated. The thermo-mechanical responses of materials during the process have been predicted employing a three-dimensional model together with a finite element software, ABAQUS. Then, mechanical properties and microstructures of the weld zone were studied with the aid of experimental observations and model predictions. It is found that the mixing of material in the weld nugget is performed more efficiently when AA5086 is in the advancing side and also the temperature field is distributed asymmetrically resulting in larger thermally affected region... 

The structure of turbidity currents released on a sloping bed below fresh water is investigated. Kaolin is used as a suspended material. Laboratory observations indicate that if a dense layer moves through the channel, the current thickness increases due to a hydraulic jump. This phenomenon occurs under special inlet conditions and has a significant effect on the current structure including velocity profile, current height and bed shear stress. Flows with different inlet Froude numbers based on various inlet concentrations behave more distinctly than those based on different inlet opening heights. Laboratory experiments indicate that an increase in the inlet Froude number causes an increase... 

Recent experiments have shown the applicability of single-layer graphene sheets (SLGSs) as electromechanical resonators. Existing theoretical models, based on linear continuum or atomistic methods, are limited to the study of linear vibrations of SLGSs. Here we introduce a hybrid atomistic-structural element which is capable of modelling nonlinear behaviour of graphene sheets. This hybrid element is based on an empirical inter-atomic potential function and can model the nonlinear dynamic response of SLGSs. Using this element, nonlinear vibrational analysis of SLGSs is performed. It is shown that the nonlinear vibrational analysis of SLGSs predicts significantly higher fundamental... 

Resonant interaction between one surface wave and two oblique interfacial waves is analyzed in a three dimensional system of a finite-depth, two-layer fluid. A third order perturbation analysis is carried out to obtain the evolution equations of the waves amplitudes. Taking the waves amplitudes as the perturbation small parameter, the evolution equations of the waves are solved simultaneously to obtain the short and long term behavior of the interfacial waves. In contrast to the second order analysis, the current analysis shows that after an initial exponential growth period, the interfacial waves stop growing and stabilize. Furthermore, the influences of surface wave frequency, density... 

In this article a new parameter is introduced that optimizes penetration depth of a long rod penetrating into a semi-infinite target. This parameter helps to optimize penetration depth when the projectile is subjected to transverse loading. This parameter is defined using a simple assumption governing bending moment and deflection of the rod as well as the experimental observation of long rod penetrators having aspect ratios (L/D) of greater than 30. In this article the length of the rod that sustains allowable bending stress but does not fail is calculated. Using the results of the bending analysis and solution of the Alekseevskii & Tate (AT) equation, an analytical method to optimize... 

In this work, thermo-mechanical behavior and microstructural evolution in similar and dissimilar friction stir welding of AA6061-T6 and AA5086-O have been investigated. Firstly, the thermo-mechanical behaviors of materials during similar and dissimilar FSW operations have been predicted using three-dimensional finite element software, ABAQUS, then, the mechanical properties and the developed microstructures within the welded samples have been studied with the aid of experimental observations and model predictions. It is found that different strengthening mechanisms in AA5086 and AA6061 result in complex behaviors in hardness of the welded cross section where the hardness variation in similar... 

Magnetic Shape Memory Alloys (MSMAs) are a category of active materials which can be excited by magnetic field. These alloys have been used in sensor and actuator applications recently. MSMAs possess special properties such as large magnetic field-induced strains (up to %10) and high actuation frequency (about 1kHz), while ordinary shape memory alloys can't act in frequencies above 5Hz due to the time involved with heat transformation. In this paper, MSMAs are modeled by an incremental modeling approach which utilizes different secant moduli for different parts of stress-strain curve. Furthermore, stress-strain curve of MSMAs is approximated using an analytical expression. The incremental... 

In the present work, numerical simulation of cross flow microfiltration of non-alcoholic beer in a tubular membrane has been studied theoretically and verified experimentally. Finite element method was used as a powerful tool for simulation. The feed stream, which flows mainly tangentially to the porous membrane surface, is modeled by the Navier-Stokes equations whereas the porous wall conditions are described by the Darcy equation that relates the pressure gradient within a flow stream to the flow rate through the permeable wall. A new model that considers transient behavior of the membrane due to fouling was used to estimate the permeate flux reduction. A pilot-scale cross flow membrane... 

Many heavy oil reservoirs contain discontinuous shales which act as barriers or baffles to flow. However, there is a lack of fundamental understanding about how the shale geometrical characteristics affect the reservoir performance, especially during polymer flooding of heavy oils. In this study, a series of polymer injection processes have been performed on five-spot glass micromodels with different shale geometrical characteristics that are initially saturated with the heavy oil. The available geological characteristics from one of the Iranian oilfields were considered for the construction of the flow patterns by using a controlled-laser technology. Oil recoveries as a function of pore... 

Analytical Jacobian, nonlinear least square and three layer artificial neural network models are employed to predict deformation of mouse embryos under needle injection, based on experimental data captured from literature. The Maximum Absolute Error (MAE), coefficient of determination ( R2), Relative Error of Prediction (REP), Root Mean Square Error of Prediction (RMSEP), NashSutcliffe coefficient of efficiency ( Ef) and accuracy factor ( Af) are used as the basis for comparison of these three models. Analytical Jacobian, nonlinear least square and ANN models have yielded the correlation coefficient of 0.9985, 0.9964 and 0.9998, respectively. The REP between the models predicted values and... 

Overall turbine analysis requires large CPU time and computer memory, even in the present days. As a result, choosing an appropriate computational domain accompanied by a suitable boundary condition can dramatically reduce the time cost of computations. This work compares different geometries for numerical investigation of the 3D flow in the runner of a Francis turbine, and presents an optimum geometry with least computational effort and desirable numerical accuracy. The numerical results are validated with a GAMM Francis Turbine runner, which was used as a test case (GAMM workshop on 3D computation of incompressible internal flows, 1989) in which the geometry and detailed best efficiency...