Sharif Digital Repository

In recent years, development of high-performance supercapacitor electrode materials has stimulated a great deal of scientific research. The electrochemical performance of a supercapacitor strongly depends on its material structures. Herein, we report a simple strategy for high-performance supercapacitors by building pseudocapacitive CuS nanospheres with nanoporous structures, nanosized walls (<10 nm) and relatively large specific surface area of 65 m2/g. This electrode demonstrates excellent electrochemical performance including a maximum specific capacitance of 814 F/g at 1 A/g, significant rate capability of 42% capacitance retention at an ultrafast rate of 50 A/g, and outstanding... 

Catalyst layers are one the important parts of the PEM fuel cells as they are the main place for electrochemical reaction taking place in anode and cathode of the cells. The amount of catalyst loading of this layer has a large effect on PEM fuel cell performance. Non-uniformity of reactant concentration could lead to a variation of current density in anode and cathode catalyst layer. The main reason for this phenomenon is porosity variation due to two effects: 1. compression of electrode on the solid landing area and 2. Water produced at the cathode side of diffusion layer. In this study the effect of variable current density in anode and cathode electrode on cell performance is... 

The formation of the oxide layer with Zr compounds on AZ31 Mg alloy processed by two-step plasma electrolytic oxidation (PEO) has been investigated. After the PEO process first in an alkaline phosphate electrolyte and second in an acid electrolyte containing K2ZrF6, the microstructure, chemical composition, and phase composition of the oxide layers were analyzed via SEM, EDS, and XRD, respectively. The electrochemical reaction and the high temperature caused by the plasma discharges in the electrolyte were the main factors leading to the fabrication of an oxide layer containing Zr compounds on AZ31 Mg alloy. The micro-pores were filled with ZrO2 formed during the PEO process. The results of... 

Models play an important role in fuel cell design and development. One of the critical problems to overcome in the proton exchange membrane (PEM) fuel cells is the water management. In this work a steady state, two dimensional, isothermal model in a single PEM fuel cell using individual computational fluid dynamics code was presented. Special attention was devoted to the water transport through the membrane which is assumed to be combined effect of diffusion, electro osmotic drag and convection. The effect of current density variation distribution on the Water content (λ) in membrane/electrode assembly (MEA) was determined. After that detailed distribution of oxygen concentration, water... 

In proton exchange membrane fuel cell (PEMFC) operations, the electrochemical reactions produce a rise in temperature. A fuel cell stack therefore requires an effective cooling system for optimum performance. In this study, miniature heat pipes were applied for cooling in PEMFC. Three alternatives were considered in tests: free convection, forced convection cooling with air, and also water. An analytical model was developed to show the possibility of evoking heat from inside a fuel cell stack with different numbers of miniature heat pipes. An experiment setup was designed and then used for further analysis. The proposed experiment setup consisted of a simulated fuel cell that produced heat... 

Due to unique advantages, the development of high-performance supercapacitors has stimulated a great deal of scientific research over the past decade. The electrochemical performance of a supercapacitor is strongly affected by the surface and structural properties of its electrode materials. Herein, we report a facile synthesis of high-performance supercapacitor electrode material based on CuS nano-hollow spheres with nanoporous structures, large specific surface area (97 m2 g−1) and nanoscale shell thickness (<20 nm). This interesting electrode structure plays a key role in providing more active sites for electrochemical reactions, short ion and electron diffusion pathways and facilitated... 

The catalyst layers are the most important part of the polymer electrolyte membrane (PEM) fuel cells, and the cell performance is highly related to its structure. The gas diffusion layers (GDLs) are also the essential components of the PEM fuel cell since the reactants should pass through these layers. Model prediction shows that electrical current in catalyst layer is non-uniform, influenced by the channel-land geometry. In addition, the compression effect of GDLs and water generation due to the electrochemical reaction may cause non-uniformity in porosity and, therefore, increases the non-uniformity in reactant concentration in GDL/catalyst layer interface. Simulation results suggest that... 

Electro-oxidation of methanol on Ni in NaOH solutions with the alkali concentration in the range of 0.05-0.5 M and in the presence of 0.5 M Na 2SO4 supporting electrolyte is studied. All the mentioned species compete for adsorption on Ni and OH- is essential for the electro-oxidation process. The electro-oxidation seems to proceed through the electro-chemical reactions of adsorbed methanol and hydroxide species and the removal of the resulting intermediate by adsorbed hydroxyl groups. The mechanism is consistent with the cyclic voltammetry and impedance spectroscopy results and can semi-quantitatively account for the appearance of capacitive, inductive and negative resistance loops as well... 

This study shows the growth behavior of Co-Ni alloy nanowires in AAO template. Growth of nanowires consists of four different stages namely electronucleation, steady state growth, filling of pores, and coverage of filled nanowires and forming of a film on the template surface. TEM study of nanowires showed that the nanowires possess hemispherical head due to the preferable and more rapid growth phenomenon in central section of nanowires instead of edge sides. Studies on the relations between nanowires composition and ion concentration in solution showed that growth of nanowires is a diffusion-controlled process. The compositional, structural and magnetic properties of nanowires were... 

Corrosion of mild steel in aqueous solutions containing hydrogen sulphide was modelled under the condition that an iron sulphide film was formed on the steel surface. In the present model, the iron sulphide forms on the steel surface as a result of a solid state reaction between iron and hydrogen sulphide which has several steps. First a very thin film of iron sulphide nucleates on the steel surface. Then, due to further growth of the initial thin layer, a more porous layer of iron sulphide forms on the initial film. In the present model, it is assumed that mass transfer through the thin iron sulphide layer (i.e. adjacent to the steel substrate) controls the corrosion rate of steel in H 2S... 

Solid oxide fuel cells (SOFCs) introduce a promising electrochemical conversion technology to generate electricity directly from fuel oxidization. A three-dimensional (3D) numerical model is proposed to evaluate the SOFC performance by employing computational fluid dynamics (CFD) approach based on the finite element method. This research includes simultaneously solving momentum, energy, and mass transport equations linked with the electrochemical reactions. First, the modeling results of a SOFC system with a rectangular channel in the absence of obstacles are compared with the experimental data, showing very good agreement. The effects of different shapes and numbers of obstacles on fuel... 

Demand for high-capacity, long cycle life, and aqueous batteries based on abundant metals such as nickel, zinc, aluminum, and so on is rising in the energy storage field. In this study, we design a hierarchical morphology as a nanosheet-built microsphere of nickel vanadium layered double hydroxide (NiV LDH) with conductive agents graphene oxide (GO) and multiwalled carbon nanotubes (CNTs) through a low-cost hydrothermal synthesis method. The experimental results demonstrate that the graphitic structures and functional groups of the GO and CNT play an important role in controlling nucleation, growth speed, size, and finally morphology of hierarchical nanosheets. The electrochemical results... 

A model for prediction of corrosion of mild steel in aqueous solutions containing carbon dioxide is proposed. In this model, formation of protective corrosion product is not yet considered, species concentration at the surface was calculated by using molecular diffusion phenomena and the diffusion equations were solved using the finite difference method. Calculated electrochemical currents at the steel surface may be used to determine the corrosion rate. The model was verified experimentally under atmospheric pressure and the effect of parameters, such as liquid velocity and pH, was investigated. The model can predict the electrochemical reaction rates when they were controlled by diffusion... 

Models play an important role in fuel cell design and development. One of the critical problems to overcome in the proton exchange membrane (PEM) fuel cells is the water management. In this work a steady state, two-dimensional, isothermal model in a single PEM fuel cell using individual computational fluid dynamics code was presented. Special attention was devoted to the water transport through the membrane which is assumed to be combined effect of diffusion, electro-osmotic drag and convection. The effect of current density variation distribution on the water content (λ) in membrane/electrode assembly (MEA) was determined. In this work the membrane heat conductivity is considered as a...