Sharif Digital Repository

Electrodeposition of aluminum onto graphite from a molten electrolyte containing AlCl3-NaCl-KCl was studied by the method of chronoamperometery. In the early stage of the deposition and at low cathodic potentials two-dimensional (2D) nucleation and growth proceeding through instantaneous and a multitude of progressive steps followed the initial double layer charging. The processes are manifested as peaks on a decaying chronoamperogram. Non-linear fitting methods were applied to obtain the kinetic parameters in the light of Bewick, Fleischmann and Thirsk (BFT) theory. Under more cathodic potentials, transition from 2D to three-dimensional (3D) processes have been observed as manifested in the... 

Electrochromism (EC) is a unique property of certain materials that undergo an electrochemical-induced change in colouration. During the last decades, electrochromic materials (ECMs) have been applied in a variety of technologies ranging from smart windows to information displays and energy storage devices. More recently, ECMs have attracted the attention of the (bio)sensing community thanks to their ability to combine the sensitivity of electrochemical methods with the intuitive readout of optical sensors. Although still a nascent technology, EC-based sensors are on the rise with several targets (e.g. cancer biomarkers, bacteria, metabolites and pesticides), which have already been detected... 

Electrophosphating is the novel method for accelerating the low temperature phosphating bath. This method can be performed as cathodic and anodic treatments. Both of them influence the coating deposition mechanism and therefore coating properties. In this study Zn-Ni electrophosphate coating was applied on galvanized steel using cathodic and anodic electrochemical methods. Microstructure, composition and corrosion resistance of coating were characterized by using a scanning electron microscopy, X-ray diffraction method and potentiodynamic polarization test respectively. The results of this study indicated that, by using cathodic method, compact phosphate coating with high corrosion... 

Cadmium sulfide (CdS) thin film was electrodeposited on indium tin oxide (ITO) by chronoamperometry. The SEM images showed that hexagonal sheets of CdS deposited on the ITO surface. The X-ray diffraction (XRD) analysis confirmed this structure for CdS crystals and the average of crystalline size and the lattice constant parameters are approximately 39.54 and a = 0.4136, c = 0.6696 nm respectively. Photo-electrochemical investigations were performed by cyclic voltammetry (CV), linear sweep voltammetry (LSV), and electrochemical impedance spectroscopy (EIS) techniques. CdS band edges and density of states (DOS) were determined by CV technique. The band gap energy (Ebg) was measured... 

Electrophosphating is the novel method for accelerating the low temperature phosphating bath. This method can be performed as cathodic and anodic treatments. Both of them influence the coating deposition mechanism and therefore coating properties. In this study Zn–Ni electrophosphate coating was applied on galvanized steel using cathodic and anodic electrochemical methods. Microstructure, composition and corrosion resistance of coating were characterized by using a scanning electron microscopy, X-ray diffraction method and potentiodynamic polarization test respectively. The results of this study indicated that, by using cathodic method, compact phosphate coating with high corrosion... 

Demand for more efficient energy storage devices stimulates efforts to search and develop new materials and composites with promising properties. In this regard, composite materials, including carbonaceous materials and metal oxides have attracted a great attention due to better electrochemical performance as compared to their single material analogues. For the first time, herein, we report a new and simple procedure for preparing porous highly oriented pyrolytic graphite/nickel hydroxide composite (P-HOPG/Ni(OH)2) via a fast and simple two-step electrochemical method including potentiostatic routes. In the first step, a low anodic potential (2 V) was applied to pristine HOPG in 0.5 M H2SO4... 

In this study two cation coating of calcium and zinc has been developed on stainless steel 316L by electrochemical method. Cathodic current used as an accelerator for phosphating process and the effects of current density on microstructure of the phospahted layer and the time needed for termination of the phosphating process has been evaluated by potential-time, SEM, EDS, etc. Results indicate that higher current densities in electrochemical phosphating will result in heavier phospahted layer with finer crystal size which in turn deteriorates the quality of the layer by its higher porosity. Chemical analysis of the layer reveals that using the electrochemical method for phosphating of... 

The early stages of nucleation and growth of nanostructures can control the shape and final size of the fabricated nanostructure. Therefore, the study of the nucleation and growth mechanism of nanostructures is of great importance. The purpose of this study is to investigate the nucleation and growth mechanism of nickel nanocones from a chloride-based bath containing ethylene ammonium dichloride as a crystal modifier. Cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and chronoamperometry tests were employed to investigate the nucleation and growth mechanism and also the mechanism of crystal modifier performance on the growth of nanocones. Electrochemical studies revealed... 

Although hematite (i.e., α-Fe2O3) has been widely investigated in photoelectrochemical water oxidation studies due to its high theoretical photocurrent density, it still suffers from serious surface charge recombination and low photoelectrochemical stability. Here we report an in situ electrochemical method to form a uniform and ultrathin (i.e., 3-5 nm) passivation layer all over the pores of an optimized ∼3.2% Ti-doped α-Fe2O3 photoanode. We unveil the amorphous and defective nature of the in situ derived layer assigned to a high concentration of oxygen vacancies and intercalated potassium atoms there, i.e., the formation of Ti/K co-doped defective α-Fe2O3−x. Owing to the efficient... 

One of the main concerns in cladding Inconel 625 superalloy on desired substrates is deterioration of corrosion resistance due to cladding process. The present study aims to compare the effect of fusion cladding and explosive cladding procedures on corrosion behavior of Inconel 625 cladding on plain carbon steel as substrate. Also, an attempt has been made to investigate the role of load ratio and numbers of fusion layers in corrosion behavior of explosive and fusion cladding Inconel 625 respectively. In all cases, the cyclic polarization as an electrochemical method has been applied to assess the corrosion behavior. According to the obtained results, both cladding methods aggravate the... 

Nickel-modified glassy carbon electrode (GC/Ni) prepared by galvanostatic deposition was used for the electrocatalytic oxidation of glucose in alkaline solutions where different electrochemical methods were employed. In cyclic voltammetry studies, in the presence of glucose an increase in the peak current of the oxidation of nickel hydroxide is followed by a decrease in the corresponding cathodic current. This suggests that the oxidation of glucose is being catalyzed through mediated electron transfer across the nickel hydroxide layer comprising nickel ions of various valence states. Under the chronoamperometric regime, the reaction followed a Cottrellian behavior and the diffusion...