Sharif Digital Repository

The emergence of phase separation is investigated in the framework of a 2D t-J model by means of a variational product ansatz, which covers the infinite lattice by two types of L × L clusters. Clusters of the first type are completely occupied with electrons, i.e. they carry maximal charge Qe = L2 and total spin 0, and thereby form the antiferromagnetic background. Holes occur in the second type of clusters - called 'hole clusters'. They carry a charge Qh0.5) it turns out that hole clusters are occupied with an even... 

In this paper a three-dimensional numerical model is developed in order to study the heat transfer enhancement in rectangular microchannels due to electrokinetic effect. The electrokinetic body force on fluid elements gives some superior convective transport properties to the flow relative to pure pressure driven flow in microchannels. Unlike the conventional parabolic velocity profile of pressure driven laminar flow, the electrokinetic body force transforms the velocity profile to a slug-like flow. Due to sharp velocity gradient near the wall, the convective heat transfer properties of the flow are improved dramatically. Net charge distribution across the channel is obtained by solving the... 

In this paper, the excitation of surface waves in the presence of interface charges is discussed. Interface charges affect the dispersion of surface waves, and therefore they can be used in various applications such as optical modulators, switches, sensors and filters. These waves can be superior to surface plasmon waves since they are not lossy. The lossless property is satisfied in a limited range of millimetre waves to far infrared  

In this paper active vibration control of functionally graded material (FGM) plates using piezoelectric sensor/actuator patches is studied. A simply supported FGM rectangular plate which is bonded with a piezoelectric rectangular patch (patches) on the top and/or bottom surface(s) as actuators/sensors is considered. When a constant electric charge is imposed, the governing differential equations of the motion are derived using classical laminated plate theory (CLPT). The solution for the motion equation is obtained using a Fourier series method and the effect of feedback gain and FGM volume fraction on the plate frequency and displacement (w) are studied. It is noticed that increasing the... 

Because of the complex nature of carbonate reservoirs, the required conditions for effective Low Salinity Water Flooding (LSWF) in these reservoirs need further and in depth investigation. In the present study, three calcite cores, i.e. Cal-1, Cal-2, and IL, with the same chemical composition are subjected to tertiary low salinity water flooding (LSWF), while the crude oil and composition of flooding brine kept the same. The experimental results show significant difference in the amount of enhanced oil recovery, as IL had the most additional oil recovery (20.8 % of IOIP), followed by Cal-2 (10.5 % of IOIP) and Cal-1 (3.9 % of IOIP). The results of contact angle, zeta potential, and effluent... 

Single electron wavefunction of a vacancy in diamond lattice has been calculated in different symmetric configurations of the nearest neighbor (NN) atoms. We used ab initio density functional theory (DFT) and unrestricted Hartree-Fock (UHF) cluster methods. The variation of electron or spin localization on NN atoms have been investigated with respect to the lattice relaxation in the ground state of the neutral and negatively charged vacancy. Calculated variations are not symmetric with respect to the sign of the lattice relaxation. We obtain about 90% localization for electronic charge and spin density for the neutral and negatively charged vacancy, respectively. This is in good agreement... 

A very low voltage transconductor for video frequency range applications and compatible with standard CMOS technology is described. In the proposed transconductor, except the DC level shifter circuit (DCLS), the whole transconductor uses the main supply voltage [which can be as low as 1.5 V in a standard 0.6 μm CMOS technology] while the DCLS uses a simple charge-pump circuit as its supply voltage and has a very low current consumption. In addition, proper common-mode sense and charge-pump circuits are developed for this low-voltage application. Meanwhile, some techniques to improve the frequency response, linearity, and noise performance of the proposed transconductor are described. In a... 

Intermittency of height fluctuations in stationary state of the Kardar-Parisi-Zhang (KPZ) equation with infinitesimal surface tension in 1+1 dimensions was discussed. Stochastic differential equations were used for the study. It was found that the probability density function [in 1+1] is independent of the coefficient of the linear term. When the random force with smooth spatial correlation was considered, the problem changed to a more complicated one  

The mechanical stability of conductive, single-walled carbon nanotubes (SWCNTs) under applied electric field and compressive loading is investigated. The distribution of electric charges on the nanotube surface is determined by employing a method based on the classical electrostatic theory. For mechanical stability analysis, a hybrid atomistic-structural element is proposed, which takes into account the nonlinear features of the stability. Nonlinear stability analysis based on an iterative solution procedure is used to determine the buckling force. The coupling between electrical and mechanical models is accomplished by adding Coulomb interactions to the mechanical model. The results show... 

Low salinity water flooding (LSWF) has the potential to enhance the oil recovery by affecting the fluid-fluid and rock-fluid interactions. Therefore, a systematic investigation on the effect of initial wetting state (water-wet or oil-wet) of pure calcite is conducted to study the importance of these interactions on the effectiveness of LSWF. In the case of initially water-wet cores, more oil recovery efficiency is observed for more saline water cases. To shed light on the possible involved mechanisms, dynamic IFT, dynamic contact angle (CA), oil/brine and rock/brine surfaces zeta potentials, and effluent pH are measured. It is shown that the short-term effect of IFT reduction and long-term... 

Perceiving the electrical behavior of the rock/brine and the crude oil/brine interfaces gives insight into the performance of engineered waterflooding. Compared to the rock surface, few studies have attempted to comprehend the complex behavior of the crude-oil surface electrical behavior. To reveal the impact of each ion on the surface charge of crude oil, the zeta potential of crude oil/single-salt brines (including NaCl, CaCl2, MgCl2, Na2SO4, and NaHCO3) was measured in a wide range of salinity. Then, the counterpart interfacial tension (IFT) was measured to determine the capability of each brine in bringing carboxylic acid groups from crude-oil bulk (COOH) to crude oil/brine interface... 

In this work, the electrokinetic properties of asphaltene particles have been investigated. Micro-electrophoresis method by applying DC electric field, was utilized to different mixtures containing asphaltene to determine its electric charge. It was observed that in the case of using n-heptane and its mixture with toluene (heptol), the asphaltene particles were showed to be positively charged however for toluene itself, they expressed no tendency toward the electrodes. While it is expected that larger asphaltene aggregates carry higher electric charge, the results contradictorily showed that they are mainly governed by gravity rather than electro-static force and that “aggregation” reduces...