Sharif Digital Repository

For many years the model of a dynamic adsorption layer (DAL) is well established as explanation for the behavior of rising bubbles in surfactant solutions. This model explains the velocity profile and the evolution of the shape of a rising bubble based on the hypothesis of the balance between the drag force and the structure of the adsorbed layer governed by Marangoni convection. However, direct measurements of interfacial properties of the bubble during rising are a real challenge. Here we present a new experimental protocol called "bubble in flow field" suitable for direct measurements of dynamic interfacial properties of a bubble surface using the capillary pressure tensiometry under... 

The rising velocity of air bubbles in surfactant solutions is a sensitive measure for the formation of a dynamic adsorption layer (DAL) at the bubble surface. Due to a certain surface coverage by adsorbed species the bubble surface starts to become immobilized and the rising velocity is retarded. There is a large difference in the retardation effect in presence of the protein β-lactoglobulin (BLG) alone and its mixed solutions with surfactants. In presence of added surfactants BLG forms complexes, which adsorb and retard the bubble rising velocity according to their respective surface activity and adsorption kinetics. While the nonionic surfactant C12DMPO does not show significant increase... 

The interfacial properties of crude oil are highly complex and are not yet well understood. This study aimed to evaluate the effect of temperature (30-80°C) and pressure (3.44-27.58MPa) on the dynamic interfacial tension (IFT) of crude oil/aqueous solutions consisting of 15000ppm of salt containing different chloride anions, e.g. NaCl, KCl, MgCl2, and CaCl2. To reach this goal, several parameters, such as dynamic and equilibrium IFT, adsorption time, diffusivity of resin, and asphaltene as surface-active agents from bulk of crude oil towards fluid/fluid interface and surface excess concentration of them at the interface, were compared as a function of temperature, pressure, and ion type. The... 

In this study, dynamic adsorption behavior of different gaseous volatile organic compounds (VOCs) on a new modified M-MIL-101(Cr) was investigated with a great emphasis on gasoline adsorption. The M-MIL-101(Cr) was synthesized, along with comprehensive purification procedures, using a new linker to cluster molar ratio (2:1 instead of 1:1) and different modulators (i.e. HF and HNO3). All prepared adsorbents were characterized by XRD, FTIR, FE-SEM and N2 adsorption-desorption at 77 K. The results showed that surface area and pore volume of the M-MIL-101@Free (i.e. modified MIL-101(Cr) with using any modulator) which were 4293 m2/g and 2.43 cm3/g, greatly elevated up to 37.2% and 71.6% against... 

The interfacial properties of crude oil are highly complex and are not yet well understood. This study aimed to evaluate the effect of temperature (30–80 °C) and pressure (3.44–27.58 MPa) on the dynamic interfacial tension (IFT) of crude oil/aqueous solutions consisting of 15 000 ppm of salt containing different chloride anions, e.g. NaCl, KCl, MgCl2, and CaCl2. To reach this goal, several parameters, such as dynamic and equilibrium IFT, adsorption time, diffusivity of resin, and asphaltene as surface-active agents from bulk of crude oil towards fluid/fluid interface and surface excess concentration of them at the interface, were compared as a function of temperature, pressure, and ion type.... 

In this study, the dynamic adsorption of asphaltene on a calcite surface is investigated. This study investigates the effect of mixed-salt brines on asphaltene adsorption. The results of this work can facilitate the understanding of the complex wettability behaviour of carbonate reservoirs. All experiments were performed in porous media, which were sand-packs filled with calcite powder, to study the influence of the type and concentration of salt on adsorption. The experiments were conducted with asphaltene concentration of 500 mg/L for brines of NaCl, Na2SO4, and a mixture of the two at various ionic strengths. In addition, two tests were performed with an asphaltene concentration of 2000... 

In the current study, hydrogen fluoride (HF) adsorption onto the sodium fluoride pellets is modeled. For this purpose a two-dimensional, non-isothermal model was developed and the governing equations were solved numerically. The contributions of diffusion transport in axial and radial directions also were considered in mathematical formulations. The model results of effluent concentration and breakthrough curves of HF were compared with the experimental data obtained in a lab-scale adsorption unit, reported in our previous work [1]. The results indicate while the feed gas velocity decreases, the HF adsorption capacity on NaF is significantly enhanced and there is a delay in breakthrough... 

In this research, the equilibrium and dynamic adsorption studies of the CO2 upon the MIL-101(Cr) metal-organic framework (MOF) as well as its GNP hybrid composites, the MIL-101(Cr)/GNP, were performed. First, the hybrid composite samples were synthesized by adding various amounts of GNP in an in situ manner during the preparation of the MIL-101(Cr). The prepared materials were characterized through several physicochemical analyses, including powder X-ray diffraction (PXRD), adsorption of nitrogen at 77.4 K, Fourier transfer infrared (FT-IR) spectroscopy, thermal analysis (DTG), and field emission scanning electron microscopy (FESEM). It was demonstrated that the synthesized MIL-101(Cr)/GNP...