Loading...
Search for: droplet-volume
0.005 seconds

    Analytical relations for long-droplet breakup in asymmetric T junctions

    , Article Physical Review E - Statistical, Nonlinear, and Soft Matter Physics ; Volume 91, Issue 5 , May , 2015 ; 15393755 (ISSN) Bedram, A ; Moosavi, A ; Hannani, S. K ; Sharif University of Technology
    American Physical Society  2015
    Abstract
    We develop accurate analytical relations for the droplet volume ratio, droplet length during breakup process, and pressure drop of asymmetric T junctions with a valve in each of the branches for producing unequal-sized droplets. An important advantage of this system is that after manufacturing the system, the size of the generated droplets can be changed simply by adjusting the valves. The results indicate that if the valve ratio is smaller than 0.65, the system enters a nonbreakup regime. Also the pressure drop does not depend on the time and decreases by increasing the valve ratio, namely, opening the degree of valve 1 to valve 2. In addition, the results reveal that by decreasing... 

    Numerical modeling of instability and breakup of elliptical liquid jets

    , Article AIAA Journal ; Volume 58, Issue 6 , June , 2020 , Pages 2442-2449 Morad, M. R ; Nasiri, M ; Amini, G ; Sharif University of Technology
    American Institute of Aeronautics and Astronautics Inc  2020
    Abstract
    Numerical simulations are performed to provide an in-depth insight into the effect of instabilities on liquid jets discharging from elliptical orifices. The axis-switching phenomenon and breakup are simulated and characterized under the effect of disturbances imposed at the nozzle exit. The simulations are based on the volume of fluid approach and an adaptive meshing. A range of orifice aspect ratios from 1 to 4 at the Rayleigh breakup regime is considered. The evolution of the jet cross section and axis switching under the influence of disturbances is compared with that of nonperturbed elliptical jets. It is found that the axis-switching repetition and breakup length exponentially decrease... 

    Ferrofluid droplet formation from a nozzle using alternating magnetic field with different magnetic coil positions

    , Article Journal of Magnetism and Magnetic Materials ; Volume 498 , 2020 Favakeh, A ; Bijarchi, M. A ; Shafii, M. B ; Sharif University of Technology
    Elsevier B.V  2020
    Abstract
    Ferrofluid has been used in many fields, such as microfluidics, droplet formation, and heat transfer, due to its potential to be attracted in the presence of a magnetic field. Droplet formation, itself, has many applications such as emulsions, 3D micro-printers, MEMS, and electro-sprays. In this study, the mechanism of ferrofluid droplet formation from the nozzle in the presence of an alternating magnetic field was investigated. The magnetic coil was fixed at different angles with respect to gravity and the effect of the alternating magnetic field and the angle of the magnetic coil axis with respect to gravity on the produced droplet volume, satellite droplet, and droplet formation frequency...