Sharif Digital Repository

In this paper, a mathematical model has been developed to determine temperature distribution on the run-out table. The variational formulation and the finite element method have been employed to solve the governing conduction-convection equation. In order to avoid numerical instabilities due to the convection term, the heat transfer equation is first transformed to the standard form and then Raylieght-Ritz approximation technique and the finite element method have been utilized to solve the equation. To include the effect of phase transformation during cooling of steel, a second-order rate equation for describing austenite decomposition kinetics is coupled with the heat transfer model. A... 

The alkaline treatment condition plays a crucial role in governing the ultimate properties of flax fibers. In this study, flax fibers were modified with mild alkalization and severe mercerization conditions to give fundamental insight into how the molecular-scale changes in cell wall fine structure and cellulose supramolecular structure can affect the macroscopic properties of fibers. SEM, FTIR, XRD, TGA, and DSC techniques were employed to characterize the variations in morphology, composition, crystalline structure, and thermal properties of fibers. Also, tensile tests evaluated their reinforcing performance in polypropylene-based composites. The results indicated that alkalization in 5%... 

In the present work, the synergetic effect of Ti-based catalysts (TiH2 and TiO2 particles) on hydrogen desorption kinetics of nanostructured magnesium hydride was investigated. Nanostructured 84mol% MgH2-10%mol TiH2-6%mol TiO2 nanocomposite powder was prepared by high-energy ball milling and subjected to thermal analyses. Evaluation of the absorption/desorption properties revealed that the addition of the Ti-based catalysts significantly improved the hydrogen storage performance of MgH2. A decrease in the decomposition temperature (as high as 100°C) was attained after co-milling of MgH2 with the Ti-based catalysts. Meanwhile, solid-state chemical reactions between MgH2 and TiO2 nanoparticles... 

Magnesium nanopowder (MgNP) of 17 nm average size was produced by planetary ball milling of Mg (φ=229 μm) with 10 wt% NaCl (φ=406 μm) for 50 h. NaCl was omissible by dissolution in saturated KOH. Partial oxidation of MgNP occurred, however, in presence of KOH. MgNP-NaCl mixture was, therefore, used for transmission electron microscopy (TEM), scanning electron microscopy (SEM), x-ray diffraction (XRD), differential scanning calorimetry (DSC) and Sieverts equilibrium investigation. DSC analysis of ammonium perchlorate showed one endothermic and three exothermic reactions. MgNP did not noticeably affect on the initial endothermic reaction. But it decreased transformation temperatures of the... 

Thermal degradation behavior of multi-wall carbon nanotubes (MWCNTs)/ultra high molecular weight polyethylene (UHMWPE) nanocomposites, with different nanotubes contents (0.5, 1.5 and 3.5 wt%) prepared via in-situ polymerization technique have been investigated using thermal gravimetric analysis (TGA). TGA spectra revealed that these nanocomposites had enhanced thermal stability and no significant mass loss (<0.4 wt%) occurred up to 350°C. Thermal degradation of these UHMWPE/MWCNT nanocomposites was investigated in terms of parameters such as the onset temperature of degradation (T 10), the decomposition temperature at 50% wt loss (T 50), the degradation temperature of maximum rate of the... 

The thermal decomposition of Aluminum Titanate in exposure to pure Aluminum was examined both in powder and in bulk form. Optical microscopy, FE-SEM, XRD, DSC and TGA examinations were conducted to take the possible chemical reactions between Aluminum Titanate and Al into consideration. It was found that as Aluminum Titanate particles are exposed to Al matrix, the thermal stability of Aluminum Titanate is degraded and its decomposition temperature is reduced from 850°C to 550°C. Also, the chemical reactions between Aluminum Titanate and Al start along the interfaces, and the reaction products, i.e. Al3Ti, Al2O3, TiO2 and O2 gas are left there. A mechanism was suggested to describe the... 

The graphene-based Ziegler-Natta catalyst has been used to prepare ultrahigh molecular weight polyethylene/graphene oxide (UHMWPE/GO) nanocomposite via in situ polymerization. The morphological investigations have been conducted using X-ray diffraction patterns and scanning electron microscopy method. The obtained results indicated that no diffraction peak is detected in a GO pattern, which could be due to the exfoliation of graphene nanosheets in the UHMWPE matrix. Morphological investigations indicated that GO nanosheets are dispersed almost uniformly in polymeric matrix, and that there should exist a good interaction between nanofillers and matrix. The mechanical properties of the... 

Abstract: This study investigates the catalytic activity of mixed–metal oxide nanoparticles with different surface acidities on asphaltene adsorption followed by catalytic oxidation–decomposition. Three different types of mixed–metal oxide nanoparticles (CeNiO3, CeCaO3 and CeZrO4) were synthesized, and their size, structure, and acid properties were characterized by field–emission scanning electron microscopy (FE–SEM), energy-dispersive X-ray spectroscopy (EDX), the high–resolution transmission electron microscopy (HR-TEM), X-ray powder diffraction (XRD), Brunauer-Emmett-Teller (BET) surface area measurement and ammonia temperature-programmed desorption (NH3–TPD). Asphaltenes were extracted... 

In the present work, nanostructured aluminum titanate (Al2TiO5 or AT) was synthesized by the sol-gel method and potential effects of mechanical strain on its phase analysis, morphology, and thermal stability were investigated in some details for the first time, because the thermal instability of AT is beneficial to the fabrication of in-situ aluminum matrix composites. To characterize the particle distribution, microstructure and thermal durability of AT after the strain induction, field-emission scanning electron microscope (FE-SEM), differential scanning calorimetry (DSC), and x-ray diffraction analysis (XRD) were utilized. The experimental results showed that a 3-h ball milling process...