Sharif Digital Repository

In airplanes, engine mounting structures have two primary performances: 1- They sustain all loads which engines produces or those which are exerted on engines in different maneuvering conditions. 2- They make the thrust load and the centric line of its containing cabin concentric [1]. In this paper, analysis of a mounting engine structure with the purpose of the accurate adjustment of the engine in its cabin is presented. Some sample diagrams, which introduced ideal adjustment angles for a specific aircraft, is proposed. These diagrams are obtained with the help of a MATLAB program that can be used for any dimension of the engine and cabin. Therefore, with the aid of these diagrams or this... 

In this work, a new model based on multilayer kinetic adsorption mechanism has been proposed to account asphaltene adsorption in porous media under dynamic condition and the model was verified using experimental data obtained in this work and also with those reported in the literature. In the proposed model two steps are considered for asphaltene adsorption. The first step is taken as adsorption of asphaltenes on the surface of the porous media and the second step is taken as adsorption of asphaltenes on the asphaltenes already adsorbed on the porous media. The Crank-Nicholson method, central difference in space and trapezoidal rule in time, giving second order convergence in time was... 

Recently, it has been proved in Babadi [B. Babadi, N. Kalouptsidis, and V. Tarokh, "Asymptotic achievability of the Cramér-Rao bound for noisy compressive sampling", IEEE Trans. Signal Process., vol. 57, no. 3, pp. 1233-1236, 2009] that in noisy compressed sensing, a joint typical estimator can asymptotically achieve the Cramér-Rao lower bound of the problem. To prove this result, Babadi used a lemma, which is provided in Akçakaya and Tarokh [M. Akçakaya and V. Trarokh, "Shannon theoretic limits on noisy compressive sampling", IEEE Trans. Inf. Theory, vol. 56, no. 1, pp. 492-504, 2010] that comprises the main building block of the proof. This lemma is based on the assumption of Gaussianity... 

As an alternative to adaptive nonlinear schemes for dimensionality reduction, linear random projection has recently proved to be a reliable means for high-dimensional data processing. Widespread application of conventional random projection in the context of image analysis is, however, mainly impeded by excessive computational and memory requirements. In this paper, a two-dimensional random projection scheme is considered as a remedy to this problem, and the associated key notion of concentration of measure is closely studied. It is then applied in the contexts of image classification and sparse image reconstruction. Finally, theoretical results are validated within a comprehensive set of... 

The theory of compressive sampling involves making random linear projections of a signal. Provided signal is sparse in some basis, small number of such measurements preserves the information in the signal, with high probability. Following the success in signal reconstruction, compressive framework has recently proved useful in classification, particularly hypothesis testing. In this paper, conventional random projection scheme is first extended to the image domain and the key notion of concentration of measure is closely studied. Findings are then employed to develop a 2D compressive classifier (2D-CC) for sparse images. Finally, theoretical results are validated within a realistic... 

The theory of compressive sampling involves making random linear projections of a signal. Provided signal is sparse in some basis, small number of such measurements preserves the information in the signal, with high probability. Following the success in signal reconstruction, compressive framework has recently proved useful in classification. In this paper, conventional random projection scheme is first extended to the image domain and the key notion of concentration of measure is studied. Findings are then employed to develop a 2D compressive classifier (2DCC) for sparse images. Finally, theoretical results are validated within a realistic experimental framework. ©2009 IEEE  

The effects of Pd addition to Fe (Pd/Fe = 0, 2.5/7.5, 5/5, 7.5/2.5 and 1) and growth temperatures (920 and 970 °C) on density, diameter and growth mode of carbon nanotubes (CNTs) have been studied. SEM observations and TG analyses confirmed that the CNT yields depend on Pd/Fe ratios as (7.5/2.5) > (5/5) > Pd > (2.5/7.5) > Fe at both growth temperatures. TEM data showed that addition of Pd results in tip growth mode. From Raman spectroscopy data, the order of samples' structural quality (I G /I D ratio) are Fe > Pd/Fe (2.5/7.5) > (5/5) > (7.5/2.5) > Pd and the I G /I D ratios increase by decreasing the growth temperature. Films with higher concentration of Fe (Pd/Fe = 0, 2.5/7.5) contain some... 

The morphological manipulation, structural characterization, and optical properties of different cadmium selenide (CdSe) nanostructures are reported. Two different CdSe nanostructures, i.e., nanorods and nanoparticles, were grown by controlling the concentration of precursors (i.e., cadmium nitrate and selenium dioxide) in ethanolamine solvent. By manipulating the kinetic parameter of the process (i.e., growth rate) under constant growth driving force (i.e., degree of supersaturation), the morphology of CdSe nanostructures can be tailored from nanorods to nanoparticles. The optical properties of CdSe nanostructures were investigated using ultraviolet-visible (UV-vis) spectroscopy. The... 

In this research, partitioning of β-amylase and amyloglucosidase was investigated in polymer-salt aqueous two-phase systems containing poly(ethylene glycol) (PEG) with different molecular weights such as 4000, 6000 and 10,000 and Na2SO4 or KH2PO4. The experimental partition coefficients were measured at T = (298.5, 301.5, 303.5, 305.5 and 308) K. The results showed that the concentration of salt in feed had more effect on partition coefficients of β-amylase and amyloglucosidase in aqueous two-phase systems than the concentration of polymer in initial feed. Also, the results indicated that temperature had a small effect on partitioning of β-amylase and amyloglucosidase enzymes. The partition... 

Pure titania porous layers consisted of anatase and rutile phases, chemically and structurally suitable for catalytic applications, were grown via micro-arc oxidation (MAO). The effect of applied voltage, process time, and electrolyte concentration on surface structure, chemical composition, and especially photocatalytic activity of the layers was investigated. SEM and AFM studies revealed that pore size and surface roughness of the layers increased with the applied voltage, and the electrolyte concentration. Moreover, the photocatalytic performance of the layers synthesized at medium applied voltages was significantly higher than that of the layers produced at other voltages. About 90% of... 

Linear-dendritic copolymers containing hyperbranched poly(citric acid) and linear poly(ethylene glycol) blocks (PCA-PEG-PCA) were used as reducing and capping agents to synthesize and support gold nanoparticles (AuNPs). PCA-PEG-PCA copolymers with 1758, 1889 and 3446 molecular weights, called A1, A2 and A3 through this work, respectively, were synthesized using 2, 5, and 10 citric acid/PEG molar ratios. The diameter of A1, A2 and A3 in a fresh water solution was investigated using dynamic light scattering (DLS) and it was between 1.8 and 2.8 nm. AuNPs were simply synthesized and supported by addition a boiling aqueous solution of HAuCl4 to aqueous solutions of A1, A2 and A3. Supported AuNPs... 

Mixing has become a challenge in micro-fluidic systems because of the low Reynolds number in micro-channels. The method which is implemented in this paper is to use freely-swimming bacteria to enhance the mixing process. Accordingly, the Serratia marcescens bacteria were used for this matter. The mixing performance of the system is quantified by measuring the diffusion rate of Rhodamine B in a particular section of a channel connected to a chamber with varying Rhodamine B concentration. The concentration of Rhodamine B was measured using the Laser Induced Fluorescence (LIF) technique. The channel is in the form of a pipe and is closed on the extending side. In this paper, it is demonstrated... 

Graphene oxide platelets synthesized by using a chemical exfoliation method were deposited on anatase TiO2 thin films. Postannealing of the graphene oxide/TiO2 thin films at 400 °C in air resulted in partial formation of a Ti-C bond between the platelets and their beneath thin film. By using atomic force microscopy and X-ray photoelectron spectroscopy analyses, UV-visible light-induced photocatalytic reduction of the graphene oxide platelets of the annealed graphene oxide/TiO2. thin films immersed in ethanol was studied for the different irradiation times. After 4 h of photocatalytic reduction, the vertical space between the platelets decreased from about 1.1 to less than 0.8 nm and the... 

In this paper, the effect of several different parameters on the thermal resistance of a Closed Loop Pulsating Heat Pipe (CLPHP) has been investigated. These parameters include the working fluid, the inclination angle, the filling ratio and the heat influx. Also, the impact of using nanofluids with different nano-particle concentrations has been analyzed. It was observed that a CLPHP can increase the heat transfer up to 11.5 times compared to an empty pipe. Optimum performance for a system with the water-silver nanofluid was achieved at conditions of 50% filling ratio and 0.9 K/W of thermal resistance, and for the water-titanium oxide system, these optimal conditions were found to be 40%... 

Novel polyampholytic superabsorbing nanocomposites based on the zwitterionic sulfobetaine monomer [3-(methacrylamido)propyl)]dimethyl(3- sulfopropyl)ammonium hydroxide were synthesized through in situ polymerization in aqueous solution with different contents of an organo-modified clay (OMMT, Cloisite 30B). Structural and thermomechanical properties of hydrogels were characterized by FT-IR, XRD, and DMTA, respectively. Swollen gel strength of hydrogels was determined by a rheological method. Storage modulus of the hydrogels was considerably improved in comparison with its the clay-free counterpart. The nanocomposite hydrogel containing 15% OMMT possessed the highest gel strength. The glass... 

Super-paramagnetic iron oxide nanoparticles (SPIONs) are recognized as powerful biocompatible materials for use in various biomedical applications, such as drug delivery, magnetic-resonance imaging, cell/protein separation, hyperthermia and transfection. This study investigates the impact of high concentrations of SPIONs on cytotoxicity and cell-cycle effects. The interactions of surfacesaturated (via interactions with cell medium) bare SPIONs and those coated with poly(vinyl alcohol) (PVA) with adhesive mouse fibroblast cells (L929) are investigated using an MTT assay. The two SPION formulations are synthesized using a co-precipitation method. The bare and coated magnetic nanoparticles with... 

Zinc oxide thin films were deposited on soda-lime glass substrates from an aqueous zinc- containing complex by two-stage chemical deposition (TSCD) method. Longmuir adsorption model showed that the adsorption of atoms on the surface of the substrate was typically physical. The relation between the fractional coverage, θ, with the equilibrium constant of the adsorption reaction was nonlinear indicating that the adsorption was non-ideal. The percentage of porosity, 1-θ, of the thin layer was determined as a function of Zn 2+ concentration of the solution. By application of XRD technique, it was shown that pure crystalline ZnO of controllable thickness could be deposited by TSCD method on the... 

Silver nanoparticles (NPs) stored in pore-arrays (pa) SU-8 photoresist layer were utilized as an antibacterial nanocomposition against E. coli bacteria. The pa-SU-8 matrix was fabricated by an optical interference lithography method resulting in small pores with a diameter of ∼50 nm and a depth of ∼100 nm. The Ag NPs were deposited on the soft polymeric matrix at different drying temperatures of 50 and 90 °C. X-ray photoelectron spectroscopy showed that the deposited silver NPs were substantially in the metallic state, independent from the drying condition. However, the concentration of the immobilized Ag NPs on the film surface increased (by a factor of 2.5) at the higher drying... 

CuO nanoparticles with average diameter of about 20. nm were accumulated on surface of sol-gel silica thin films heat treated at 300 °C in air. Heat treatment of the CuO nanoparticles at 600 °C in a reducing environment resulted in effective reduction of the nanoparticles and penetration of them into the film. While the thin films heat treated at 300 °C exhibited a strong antibacterial activity against Escherichia coli bacteria, the reducing process decreased their antibacterial activity. However, by definition of normalized antibacterial activity (antibacterial activity/surface concentration of coppers) it was found that Cu nanoparticles were more toxic to the bacteria than the CuO... 

Enzymatic decolorization of the monoazo dye, acid orange 7 (AO7) by the fungal peroxidase from Coprinus cinereus NBRC 30628 is a complex system, which is greatly affected by temperature, pH, enzyme activity and the concentrations of H2O2 and dye concentration. The study of these factors and investigating the combined interactions between them by applying one-factor-at-a-time (OFAT) method and two other statistical methods including 2-factorial method and response surface methodology (RSM) were aimed in this work. Through OFAT analysis the optimized conditions were a temperature of 25 °C, pH 9.0 with H2O2 concentration of about 3.9 mM and AO7 concentration of 40 mg/l. A complete...