Sharif Digital Repository

We have investigated the substitution of Ce and divalent Ca with a radius similar to Gd in Gd1-x-zCexCazBa 2Cu3O7-δ. We have prepared Gd 1-x-zCexCazBa2Cu3O 7-δ compounds with different concentrations of Ce and Ca by the standard solid-state reaction technique. X-ray diffraction (XRD) experiments are performed and the results are refined by the Rietveld method. XRD analysis shows a predominantly single-phase perovskite structure with orthorhombic Pmmm symmetry. In Gd1-x-zCexCazBa2Cu 3O7-δ compounds, induced suppression of T c due to Ce doping is compensated by hole doping with increasing Ca substitution for Gd. With the increase of Ca content, Tc increases up to an optimum value; thereafter... 

Photocatalysis is well-known as an effective tool for the removal of pollutants but its eco-friendly aspect has not been well explored in the literature. In this study, we prepared an ultraviolet-active photocatalyst by the growth of cerium oxide/sulfide nanoparticles in the zeolite channels via a facile coprecipitation method. The photocatalyst was comprehensively characterized by different analysis methods and showed good activity toward removal of acetamiprid, ACP, a commonly used insecticide. As the main focus of the current work, an in vivo bioassay was carried out to investigate the acute toxicity of the contaminant solutions before and after photoreaction. Accordingly, acetamiprid and... 

In this study, we prepared cerium oxide (CeO2) hybridized with reduced graphene oxide (rGO) nanosheets using the hydrothermal method. CeO2 and CeO2/rGO were evaluated as electrode materials for use in supercapacitor applications. The structure and morphology of the synthesized materials were investigated. Cyclic voltammetry tests determined a high specific capacitance of 581 F g−1 for CeO2/rGO at a scan rate of 10 mV s−1 in 2 M KOH. In addition, the CeO2/rGO electrode retained 91 % of its initial capacitance after 5000 consecutive cycles, thereby indicating its excellent electrochemical stability. The excellent stability of CeO2/rGO was due to a synergistic effect between CeO2 and rGO. CeO2... 

The phase formation and the variation of the normal phonon frequencies of high temperature superconductors YBa2Cu3O7-δ and GdBa2Cu3O7-δ upon doping Tb and Ce for Y and Gd, respectively, have been investigated using XRD and Raman spectroscopy measurements. It is found that the increase of doping content causes the formation of impurity phases that can be detected in the XRD and Raman spectra, and results in the suppression of superconductivity. Moreover, analysis of the Raman peaks reveals that substitutions of Tb and Ce for Y and Gd in the parent structure are restricted to low concentrations in favor of impurity island formation. © 2008  

ZnO–CeO2 nanoparticles were synthesized by microwave combustion and deposited by electrophoretic deposition (EPD). The effect of using two different alcohols, ethanol and methanol, was investigated on EPD behavior and morphology of deposited film. Moreover, the effect of concentration of nanoparticles and applied voltage on the mass of deposit and the variation in the current density were investigated. With a change in the alcohol type, the surface morphology of deposition changed and some voids were observed on the deposition surface in ethanol. In all cases, with increasing concentration of nanoparticles in suspension, the number of developed cracks increased. Besides, a rise in voltage... 

Oxygen evolution was observed upon mixing solid manganese(III) bidentate Schiff base complexes with aqueous solutions of cerium(IV) ammonium nitrate. However, oxygen evolution was not observed upon mixing solutions of the complexes (in acetonitrile) with Ce(IV). Electron-withdrawing substituents on the Schiff base ligands (NO2, Br) enhanced the reactivity of the manganese complexes toward oxygen evolution. Oxygen evolution was also affected by R groups on the ligands, in the order Me > Et Bz. © 2009 Springer Science+Business Media B.V  

The synthesis of nano-sized CeO 2 powder was investigated via mechanochemical reactions between hydrate cerium chloride and sodium hydroxide as the starting materials. The process was followed by a subsequent calcination procedure. Characterization of as-synthesized powder was performed using X-ray diffraction, FTIR spectroscopy, Brunner-Emmett-Teller (BET) nitrogen gas absorption, scanning electron microscopy (SEM) and particle size analyzer (PSA). The precursors were milled for different milling times and then were subjected to different heat treatment procedure at variable temperatures from 100 to 700 °C. According to the results, milling time and calcination temperatures induce... 

Eu3+- and Ce3+-doped yttrium silicate, as well as Eu2+-doped zinc silicate nanoparticles, were grown in a porous SiO2 matrix using an impregnation method. For Y2Si 2O7:Eu3+, particles of about 50 nm size were obtained that exhibited several photoluminescence (PL) peaks in red. Different peaks showed slightly different decay times; however, their excitation mechanism was found the same. Increasing the Eu concentration increased the PL intensity while reducing the decay time. Y2Si2O7:Ce 3+ nanoparticles in the porous matrix showed bright blue emission, consisting of two peaks at 358 nm and 378 nm. Re-impregnation process was found effective in changing the relative intensity of the two peaks.... 

The aim of this research is the study of hexyltriphenylphosphonium bromide (HTPB) ionic liquid as a bifunctional promoter (solvent and catalyst) in the presence of cerium(IV) ammonium nitrate as a single electron oxidant for the Michael reaction at room temperature and solvent-free conditions. A novel, one-pot and environmentally benign the process to achieve the chemoselective of 2-(3-oxo-1,3-diarylpropyl)malononitrile derivatives instead of 2-(1,3-diarylallylidene)malononitriles using a three-component reaction involving acetophenone derivatives, various aromatic aldehydes and malononitrile was developed. This protocol is simple and provides biologically interesting products in good... 

The aim of this research is the study of hexyltriphenylphosphonium bromide (HTPB) ionic liquid as a bifunctional promoter (solvent and catalyst) in the presence of cerium(IV) ammonium nitrate as a single electron oxidant for the Michael reaction at room temperature and solvent-free conditions. A novel, one-pot and environmentally benign the process to achieve the chemoselective of 2-(3-oxo-1,3-diarylpropyl)malononitrile derivatives instead of 2-(1,3-diarylallylidene)malononitriles using a three-component reaction involving acetophenone derivatives, various aromatic aldehydes and malononitrile was developed. This protocol is simple and provides biologically interesting products in good... 

Pechini process was used for preparation of three kinds of nanocrystalline powders of yttria-stabilized zirconia (YSZ): doped with 1.5 mol% nickel oxide, doped with 15 mol% ceria, and doped with 1.5 mol% nickel oxide plus 15 mol% ceria. Zirconium chloride, yttrium nitrate, cerium nitrate, nickel nitrate, citric acid and ethylene glycol were polymerized at 80 °C to produce a gel. XRD, SEM and TEM analyses were used to investigate the crystalline phases and microstructures of obtained compounds. The results of XRD revealed the formation of nanocrystalline powder at 900 °C. Morphology of the powder calcined at 900 °C, examined with a scanning electron microscope, showed that the presence of... 

A novel method is proposed in order to find the kinetics of dynamic recovery in the form of Avrami relation using hot flow curves. The relation is derived on the basis of variation of dislocation density with strain. The model is applied on an Al-Mg alloy  

We have studied the electrical and magnetic properties of RuGd 2-xCexSr2Cu2O10-δ (Ru-1222) with content of Ce = 0.0, 0.1, 0.2, 0.3, 0.4, 0.5, prepared by the standard solid-state reaction technique. To determine how the magnetic and superconducting properties of this layered cuprate system can be affected by Ce substitution, the resistivity and magnetoresistivity have been measured at various temperatures. Resistivity curves reveal the presence of four regions for various contents of x. In high temperatures, system is paramagnetic. Magnetic transition from paramagnetic state to antiferromagnetic state occurs at 140 K for x = 0, which varies very slowly with increasing Ce substitution for Gd.... 

Epitaxial cerium oxide (CeO2) buffer layer has been grown on lanthanum aluminate (LAO) single crystal substrates for fabrication of c-axis oriented YBa2Cu3O7-x (YBCO). Precursor solution of cerium acetylacetonates with viscosity of 0.6 centipoises was spin coated on the 1×1 cm area LAO substrates. The calcination was carried out by very slow ramp (1°C per minute) until the final temperature of 500°C in oxygen flow to remove most of the organic compounds. The final heat treatment has been done at 780°C by a ramp of 20° per minute in gas flow of mixed argon-oxygen with 5 Pa partial pressure of oxygen. The thickness of the deposited CeO2 buffer layer was 20 nm. Then, 100 nm thick YBCO film was...