Sharif Digital Repository

Glycerin (glycerol) is a co-product of biodiesel production that is widely produced and is available at a low cost. To date, various applications have been investigated and introduced for biodiesel glycerin. In this study, a number of valuable products were produced using biodiesel glycerin and formic acid as the main reactants. Allyl alcohol is one of the valuable chemicals produced from glycerin monoformate. Efficient production of this product requires successful completion of the first section of the reaction, which is an equilibrium reaction. The highest feasible yield achieved was about 83% (based on the consumption of formic acid) at 120-140°C without the addition of any catalysts.... 

Glycerin (glycerol) is a co-product of biodiesel production that is widely produced and is available at a low cost. To date, various applications have been investigated and introduced for biodiesel glycerin. In this study, a number of valuable products were produced using biodiesel glycerin and formic acid as the main reactants. Allyl alcohol is one of the valuable chemicals produced from glycerin monoformate. Efficient production of this product requires successful completion of the first section of the reaction, which is an equilibrium reaction. The highest feasible yield achieved was about 83% (based on the consumption of formic acid) at 120-140°C without the addition of any catalysts.... 

Conjugated linoleic acid (CLA) is one of the most physiological active fatty acids due to its positive effect on prevention of diseases such as obesity, hyperlipidemia, atherosclerosis and cancer. The aim of this study was to optimize the production of conjugated linoleic acid (CLA)% in alkali isomerization of safflower oil including 71% linoleic acid (LA) using response surface methodology (RSM). The effect of three reaction variables such as temperature, reaction time and amount of KOH on CLA production was investigated using design-expert software. The optimal condition determined at this point, 72% total CLA with the yield of 84% temperature reaction time and the amount of KOH were 187.6... 

Tributhyl phosphate (TBP) decomposition in supercritical water oxidation (SCWO) was performed with and without catalyst, at different temperatures ranging from 370 to 480 °C, and different reaction times. Ag2O, CuO, Fe2O3, MgO, and ZnO synthesized by supercritical water were examined in TBP decomposition as the catalyst. TBP structure decomposed under the non-catalytic reaction; nevertheless, the results indicated that the use of catalysts improved the reaction efficiency, which calculated based on total organic carbon (TOC) removal, by far. However, TOC removal using Fe2O3 was 20% higher than the non-catalytic reaction. Having the ability in completion of the redox cycle, iron oxide... 

Co(salen)-type [where salen = di-(salicylal)-ethylenediimine] complexes were shown to be efficient catalysts in the oxidation of 2-phenylpropane (cumene) by dioxygen primarily to 2-phenyl-2-propanol (cumyl alcohol), 2-phe-nylpropene (a-methylstyrene), and 1-phenylethanone (acetophenone) applying 1H NMR spectroscopy and gas chromatography-mass spectrometry (GC-MS). The effect of substitution on the ligand was also monitored in both oxygen-absorption and the catalytic reaction. Based on these results, the trend observed for the production of a-methylstyrene and cumyl alcohol were parallel to dioxygen uptake by the catalyst in neat cumene, while acetophenone productions obeyed a non-linear... 

Hydrodynamically fully developed flow of power-law fluids under combined action of electroosmotic and pressure gradient forces in rectangular microreactors is analyzed considering heterogeneous catalytic reactions. The Poisson-Boltzmann, Cauchy momentum, and concentration equations are considered in two dimensions and after being dimensionless are numerically solved applying a finite difference algorithm. Variation of axial concentration gradient, and axial and horizontal mass diffusions are taken into account as well. To accomplish a more general analysis, the velocity distribution is obtained by solving continuity and Cauchy momentum equations and is not considered as an average axial... 

Vacuum residue cracking has been successfully conducted under supercritical water condition in presence of various metal oxide nanocalysts, namely NiO, CuO, ZnO, Co2O3, and Cr2O3 synthesized at supercritical water. The cracking experiments were carried out at 450 °C. Three species of cracking: maltene, asphaltene, and coke were then weighed and their corresponding speciation was defined. Gas chromatography-mass spectrometry (GC–MS), nuclear magnetic resonance spectroscopy (NMR), thermogravimetric analysis (TGA), and elemental analysis (CHNS) tests were utilized to prove the performance of upgrading reactions. It was revealed that NiO showed the best performance among other catalyst, in which... 

For the first time the new 32-membered macrocyclic dinuclear palladium complex of two aza-crown macrocycles, bearing two pyridine arms, Pd2L2Cl4 was synthesized and characterized by elemental analysis, IR, NMR spectroscopy and single crystal X-ray diffraction methods. Pd2L2Cl4 was investigated as a moisture/air-stable catalyst for Sonogashira cross-coupling reaction in the absence of copper and phosphine ligand in DMSO. Thermal stability, possible occurrence of tandem reactions, promoted catalytic performance as well as synergistic effects are of advantageous features of Pd2L2Cl4. By employing Taguchi method, optimum conditions (110 °C, 6 h, KOAc, 2 mol% cat.) were determined. Moreover, the... 

In this review, the importance of nanoparticles (NPs), with emphasis on their general and specific properties, especially the high surface-to-volume ratio (A/V), in many technological and industrial applications is studied. Some physical and chemical preparation methods for growing several metallic and binary alloy NP catalysts are reviewed. The growth and mechanism of catalytic reactions for synthesis of 1D nanostructures such as ZnO nanowires and multiwall carbon nanotubes (MWCNTs) are discussed. Gas-phase production with emphasis on dependence of catalytic activity and selectivity on size, shape and structure of NPs is also investigated. Application of NP catalysts in several... 

Novel type of two-impinging-jets loop reactor (TIJLR) has been proposed and tested successfully for the solid-liquid catalytic reactions. The TIJLR was tested using the catalytic reaction of isomerization of D-glucose to D-fructose by immobilized glucose isomerase catalyst as a typical model system of solid-liquid catalytic reactions. The TIJLR is characterized by a high intensity reaction chamber, which is separated by a perforated plate from other parts of the reactor. The perforated plate was used as a filter to keep the catalyst particles within the reaction chamber. A compartment model with two adjustable parameters was considered to describe the pattern of flow within the reaction... 

Recently, aluminum titanate (Al2TiO5)-based nanostructures have been proved to serve as an efficient photocatalytic material with satisfactory photodegradation capacity. In this study, the citrate sol–gel method was used to synthesize these nanostructures and inspect the significant impacts of nitrogen-doping-originated crystalline defects on their photocatalytic performance in some details for the first time. The results indicated that the penetration of nitrogen atoms into AT crystal lattice, depending on the nitriding time and temperature, can induce a great deal of the residual stress and result in propagating the existing cracks and breaking down the particles. The XPS and FTIR results... 

Ni II-(N,N′-bis(2,4-dihydroxyacetophenone)-2, 2-dimethylpropandiimine (Ni II{salnptn(4-OH) 2}) complex has been encapsulated within the supercage of zeolite-NaY by reacting Ni 2+-exchanged NaY with the flexible Schiff-base ligand that diffuses into the cavities. The encapsulated complex is characterized by EDX, scanning electron microscopy, powder X-ray diffraction, FT-IR, and cyclic voltammetry studies. Density functional calculation is being carried out on both the free nickel Schiff-base complex and that encapsulated in NaY zeolite to investigate changes in structural parameters, energies of the HOMO and LUMO, and absolute hardness and softness. Electrochemical properties of the NaY... 

A facile sonochemical route for the synthesis of benzo[1,3]thiazine derivatives via a one pot, multicomponent, intramolecular C–H activation reaction from isocyanides, aniline and benzoyl (acetyl) isothiocyanate adduct catalyzed by copper (I) iodide in acetone at 30 °C have been reported. The advantages of the described method include using simple and readily available starting materials and performing under mild copper-catalytic reaction conditions and also obtaining pure product with high yield without applying column chromatography. Furthermore, using the sonochemical methodology as an efficient method led to reduce the reaction times. © 2018 Elsevier B.V  

A facile sonochemical route for the synthesis of benzo[1,3]thiazine derivatives via a one pot, multicomponent, intramolecular C–H activation reaction from isocyanides, aniline and benzoyl (acetyl) isothiocyanate adduct catalyzed by copper (I) iodide in acetone at 30 °C have been reported. The advantages of the described method include using simple and readily available starting materials and performing under mild copper-catalytic reaction conditions and also obtaining pure product with high yield without applying column chromatography. Furthermore, using the sonochemical methodology as an efficient method led to reduce the reaction times. © 2018 Elsevier B.V