Sharif Digital Repository

Nanotechnology inrecent yearshas attractedthe attention of manyscientists and industrialists. Having atiny structure with extraordinary properties of nanoparticlesin the fields of electrical, mechanical and thermal, leading to their use isgrowing and newer application sarebeing found forth eseparticles. One of them Nanodiamond powderiswidely usedin the industryhas found wideapplication. Among these can be used in electrochemistry, chemical coatings, pastesand suspensions, add thepolymer, ceramic and industrial rubber and adhesives,adsorbentsand catalysts, filters and membranes, and finally cancer treat mentnoted. One of these applicationsisinPolymers and Rubber Industry. According to earlier... 

Elastomers are flexible polymers with various uses in different industries. But this materials dont havevalid usages without correct fillers. Today Nano technology has a main role in the industry. one of the important reasons is rubber quality improvement with adding just a little amount of this clays, opposite to Carbon Black. To achieve a high quality polymer composite, it is necessary to learn about physical and mechanical properties of nano clays and the interaction between Nano clays and matrix. Because of the effect of nano clays on vulcanization, this issue is noticeable . Nano diamond is a nanoclay used to improve rubber quality. But this method is new because of the complicated... 

Polycarbonate (PC) is known as one of the engineering plastics with remarkable mechanical properties, but the application of this polymer is limited due to its high notch sensitivity. Blending polycarbonate with other polymers such as acrylonitrile butadiene styrene (ABS) is a method to resolve this disadvantage. PC/ABS blends are commonly used in automotive industry, electrical and electronic devices. As PC and ABS are not completely miscible, a variety of compatibilizers are used to achieve a suitable microstructure and high engineering properties. Considering crucial applications of PC/ABS blends, different flame retardants are also used to reduce the flammability. These flame retardants... 

Hybrid nanoparticle comprising of nanosilica (NS) and nanodiamond (ND), as denoted by ND@NS, was synthesized by a two-step chemistry route and then incorporated into styrene-butadiene rubber (SBR) at low concentrations up to 5 phr by a two-roll mill. Physical hybrids of NS and ND, i.e., ND&NS, with a weight ratio similar to chemical hybrid (80:20 for NS:ND), were also incorporated into SBR. Field emission scanning electron microscopy observations revealed very fine dispersion of nanoparticles in the case of physical hybrids (ND&NS); whereas, agglomerations and aggregation of nanoparticles were evidenced for ND@NS. Tensile and dynamic mechanical analyses exhibited a higher reinforcing effect... 

Nanostructure matrials have reached a special place to be used in wide applications in recent decades. Among those carbon nanotubes have got much attention due to their excellent mechanical and electrical properties and their ability of developing new nanocomposites, though the issues of perfect dispersion and interaction with polymeric matrix hinders their development. In this work, recent advances on carbon nanotubes (CNTs) and rubbers nanocomposites have been reviewed and the intrinsic potential of carbon nanotubes as reinforcing filler in elastomeric materials has been demonstrated. In experimental section in addition to CNTs, two different grades of CBs, i.e. N330 and super conductive... 

Flexible polymers (elastomers) are especially suitable for dynamic applications, and carbon fillers are well-known filler for elastomers. These are widely used in elastomer matrices for various commercial applications. Some of carbon nano fillers like Nano Diamond cannot impart such high degree of reinforcement to polymer matrices mainly because of improper filler dispersion and lack of strong filler-polymer interaction. In this effort, we examine the effects of two different nanostructured carbons when they are incorporated in a rubber matric in terms of mechanical, thermal and electrical properties of the nanocomposites. Different ingredients and hybrid nanofillers were added to matric by... 

This study aims to investigate the mechanical properties and performance of cold recycled asphalt mixtures (CRM). So far, several methods have been proposed for designing CRMs, which are mostly based on the volumetric and mechanical properties of the mixtures. In the meantime, few researches have considered performance of those mixes. The main approach of current research is to evaluate and enhance performance characteristics of CRMs regarding common distresses including early-raveling, moisture damage, fatigue cracking by an appropriate additive.Raveling and Cantabro tests were employed to evaluate the resistance of CRM against abrasion and semicircular bending test (SCB) and crack tolerate... 

Flexible polymers (elastomers) are especially suitable for dynamic applications, and carbon based fillers are well-known filler for elastomers. These types of fillers are widely used in elastomer matrices for various commercial applications. Some of carbon nano fillers like Nanodiamond cannot (ND) impart such high degree of reinforcement to polymer matrices mainly because of improper filler dispersion and lack of strong filler-polymer interaction.In this effort, we examine the effects of nanodiamond/UiO-66 hybrid nanostructured materials when they are incorporated in styrene-butadiene rubber (SBR) in terms of mechanical, thermal and electrical properties of the nanocomposites.Different... 

In recent decades, the use of modifiers has been one of the common methods on major roads to inhibit cracking and permanent deformation in asphalt pavements. Simultaneously, due to the economic and environmental benefits of hot mix asphalt recycling, the consumption of recycled asphalt pavement on all types of roads has been on the rise. However, a significant issue with recycled asphalt mixtures is their susceptibility to various types of cracking, as a result of the increased stiffness and brittleness of the recycled asphalt binders. To address this issue, two main questions need to be answered; a) the potential positive effects of modifiers left in the recycled mixture to be accounted for...