Sharif Digital Repository

Many theoretical-based comparison studies, relying on the graph theoretical viewpoints with using structural and algorithmic properties, have been conducted for the hypercube and the star graph. None of these studies, however, considered real working conditions and implementation limits. We have compared the performance of the star and hypercube networks for different message length and virtual channels and considered two implementation constraints, namely the constant bisection bandwidth and constant node pin-out. We use two accurate analytical models already proposed for the star graph and hypercube and implement the parameter changes imposed by technological implementation constraints.... 

In this paper a novel form of the familiar E-shaped patch antenna is presented. In the presented approach, by using the genetic algorithm (GA) based on fuzzy decision-making, some modifications have been implemented to the incorporated slots which lead to even more enhancement in the antenna bandwidth. The MOM (Method of Moment) is employed for analysis at the frequency band of 1.8GHz-2.6GHz by the optimization parameters of supply locations and slot dimensions. In the implemented fuzzy system, inputs are parameters like population, and outputs are parameters like recombination to produce the next generation. Fuzzy inference system (FIS) is used for the control of GA parameters. The design... 

In this paper, the effect of two-dimensional electron plasma formed on the surface of a semiconductor on the refraction phase of an optical beam is investigated. Both the density and effective mass of the surface state electrons can be controlled by a transverse electric field. While the surface density of electrons varies slowly with the applied field, their effective mass changes instantaneously. Therefore, a high bandwidth for the phase modulation can be obtained. It is expected that the device operates in the far-infrared region with a semiconductor as the base material. GaAs is one of the best candidates having both large dynamic range, and large ratio of free electron to the crystal... 

Arrays of N weakly coupled oscillators are considered in different configurations. The locking bandwidth for these arrays is defined statistically. Various factors affecting the locking bandwidth and the effect of the coupling network topology on locking bandwidth are studied by solving the dynamic equations of the array numerically. The analytical locking bandwidth for two configurations of arrays is computed and the results are compared with the numerical solution of dynamic equations. © The Institution of Engineering and Technology 2008  

In optoelectronic OTIS architectures, electrical and optical interconnects are used for local and global communication, respectively. Interesting instances of the OTIS architecture are the OTIS-hypercube and OTIS-mesh. This paper conducts a performance evaluation and comparison of these networks under different structural conditions and traffic loads. All judgments made, are based on observations from extensive simulation results of the interconnection networks. We conclude that, when the OTIS-hypercube and equivalent 2-D OTIS-mesh are compared under the constraint of equal bisection bandwidth, the performance of the OTIS-hypercube is of superior performance. We however show that the... 

A new approach for the design of two-stage Miller-compensated CMOS op amps is presented. The paper studies the basic relations between power consumption, unitygain bandwidth, the biasing region, technology parameters, and the external capacitive load. As a result, simple and efficient design guides are provided to achieve the minimum possible power consumption for the given specifications and for short-channel devices. It is shown that the conventional design procedures do not always result in minimum power op amps. The presented results are also verified by Spectre simulations  

In this paper, a reconfigurable patch antenna with Circular Polarization (CP) diversity with theoretical discussion and verification is proposed for fifth generation (5G) of mobile communication systems. The proposed antenna contains two PIN diodes, which are correctly placed on the ground plane to obtain polarization diversity. By switching between two ON/OFF modes in the PIN diodes, the proposed antenna can support either the RHCP mode or the LHCP mode. An antenna with the well-matched impedance bandwidths (S11 ≤ −10 dB) of 2.5 GHz (27 ∼ 29.5 GHz) and 3 GHz (36 ∼ 39 GHz) and the dual-band 3-dB axial ratios of 6% (27.3–29 GHz) and 8.4% (35–38.2 GHz) operates in both the RHCP and LHCP modes.... 

In many radar and EW applications, after some processing, the envelope of the received pulse is calculated and is used for target detection. Most of the time only the effect of thermal noise is considered in such detectors, but in most of the practical applications, before envelope detection, the signal should be down converted from radio frequency (RF) to an intermediate frequency (IF). In this case, the phase noise of the local oscillator will affect the signal, too. Surprisingly, in contrast to thermal noise, the effect of phase noise on the envelope of signal becomes more considerable whenever the IF bandwidth is decreased. So there exists an optimum IF bandwidth for the receiver. In... 

High-bandwidth network analysis is challenging, resource consuming, and inaccurate due to the high volume, velocity, and variety characteristics of the network traffic. The infinite stream of incoming traffic forms a dynamic environment with unexpected changes, which requires analysing approaches to satisfy the high-bandwidth network processing challenges such as incremental learning, inline processing, and outlier handling. This study proposes an inline high-bandwidth network stream clustering algorithm designed to incrementally mine large amounts of continuously transmitting network traffic when some outliers can be dropped before determining the network traffic behaviour. Maintaining... 

Here, the authors propose a new approach for realising wideband and polarisation-independent antireflection coating, based on a metamaterial composed of a subwavelength array of metallic pillars with a square cross-section. The effective impedance of the array can be duly adjusted by the size and distance of the pillars. As such, the authors design the effective impedance of the antireflection coating to be the geometrical mean of the impedance of upper and lower media and choose its height to be quarter of operating wavelength. Doing so, the reflection vanishes at the desired frequency and fractional bandwidth of 56% is achieved with a criterion of 10% reflectance (the refractive index of... 

The Time Modulated Array (TMA) provides multiple radiation beams at different frequencies, by turning the radiating elements on and off. In this paper, we propose to add polarization diversity to a wireless communication link by leveraging the capabilities of the TMA. The proposed architecture switches between two orthogonal polarizations, instead of turning the antenna off, providing polarization diversity for the receivers. We show that the beams of each polarization at the sidebandsare exactly the same. However, the switching sequence should be optimized for the fundamental frequency to provide the same radiation level at each sideband. Two different switching sequences are proposed,... 

In this paper, a wideband coupled-resonator microstrip bandpass filter is designed and experimentally demonstrated in the S-Band. The filter is comprised of quarter-wavelength hair-pin resonators, reducing resonator and filter footprint compared to conventional hairpin designs. Additionally, it is considerably forgiving to fabrication tolerances and yields remarkably close matched results between theory, simulation, and measured results. One demonstration presented has minimal insertion loss ${(< 1{dB})}$ for the entire wide bandwidth of 3.4 GHz to 4.2 GHz. Wider bandwidths up to 60% are also observed using the design. The proposed filter is an attractive solution when space is a critical... 

One of the most important obligations of privacy-enhancing technologies is to bring confidentiality and privacy to users' browsing activities on the Internet. The website fingerprinting attack enables a local passive eavesdropper to predict the target user's browsing activities even she uses anonymous technologies, such as VPNs, IPsec, and Tor. Recently, the growth of deep learning empowers adversaries to conduct the website fingerprinting attack with higher accuracy. In this paper, we propose a new defense against website fingerprinting attack using adversarial deep learning approaches called Adversarial Website Adaptation (AWA). AWA creates a transformer set in each run so that each... 

As the infrastructure-centric model of peer-to-peer streaming, recent overlay construction schemes compose a hierarchical topology of peers by grouping them into clusters. There is a server in each cluster that receives data from the source and relays it to its cluster members. In this paper, we propose an alternative infrastructure-centric peer-to-peer framework called BAHMO that constructs a hierarchical multicast tree. BAHMO does not utilize server bandwidth and rely only on peer bandwidth for data transfers. It achieves both the stability of the infrastructure-centric model and the bandwidth efficiency of the fully-distributed model. Bandwidth assignment for inter-cluster data transfers... 

Due to special constraints in peer-to-peer (P2P) networks (such as bandwidth limitation) and because of their highly dynamic characteristics, a single node cannot provide a reliable multimedia stream to the receivers. Several multi-sender algorithms are proposed to reliably deliver a media stream to the receiver through the intrinsically unreliable P2P networks. Based on upload bandwidths and availability of peers as well as the bandwidths of the links connecting the senders and the receiver, PROMISE selects a set of active senders to maximize the expected bit-rate delivered to the receiver. By careful investigation of PROMISE, in this paper, we present why and how it deviates from finding... 

We recruit basic properties of Fourier transformation to realize an electrically tunable delay line and increase the delay by creating a loop in the structure. The proposed method has been experimentally tested and verified for up to 5 roundtrips. The relative delay/advancement was increased up to 5 times compared to the original setup while preserving the original setup's advantages. © VDE VERLAG GMBH  

In this paper, utilizing the benefits of network coding, we introduce a scheme for uncoordinated dynamic distributed storage systems in which nodes can randomly join and leave the storage network. The proposed scheme can reduce the bandwidth requirement of the storage network  

The important problem of content location in an unstructured distributed network (such as P2P, with no central searching system, graph construction control or file placement regulation) is addressed. The existing methods that are based on either flooding or random walk impose a large traffic load on the network or require a long time to search. In this work, we propose a method that outperforms the existing methods in both of these measures. These advantages are achieved by publishing traces of the contents of each node in its nearby nodes, so that the closer nodes to the target have a stronger trace of it. Such traces are used to rapidly locate the desired content. The superb performance of... 

In this study, the performance of virtual cut-through switching in the cube-based OTIS architecture, an optoelectronic interconnection architecture for multicomputer systems, is empirically analyzed. Deadlock-free deterministic and adaptive minimal path routing algorithms for this architecture are introduced, and the effects of different network and traffic parameters on average message latency are investigated. This analysis presents a relatively more realistic view of the OTIS architecture than that presented in previous work by considering issues related to a lower level of abstraction (the routing and switching of messages). Among other results, the analysis indicates that depending on... 

This paper presents comparison among methods of determination of the characteristic polynomial coefficients. First, the resultant systems from the methods are compared based on frequency criteria such as the closed loop bandwidth, gain and phase margins. Then the step responses of the resultant systems are compared on the basis of the transient behavior criteria including overshoot, rise time, settling time and error (via IAE, ITAE, ISE and ITSE integral indices). Also relative stability of the systems is compared together. Finally the best choices in regards to the above diverse criteria are presented. COPYRIGHT © ENFORMATIKA