Loading...
Search for: torabi--oveis
0.121 seconds

    Hydraulic and Sediment Simulation of Rivers Passing Throw the City Affected by Land-Use Changes and Expansion of Human Activities (Case Study-Kan River’s Basin)

    , M.Sc. Thesis Sharif University of Technology Haghparast, Nazanin (Author) ; Tajrishi, Massoud (Supervisor) ; Torabi, Oveis ($item.subfieldsMap.e)
    Abstract
    understanding basin’s sediment transportation forms and river’s bed erosion in next years in addition to rivers’ response to watershed upstream activities, gives useful information to relevant experts for fundamental studies on expanding of development projects in neighborhood of kan River. This project is an effort to assess the amount of sediment production of Kan River’s basin using SWAT, modeling calibration by using measured data with SWAT-CUP and also prediction of river’s response to watershed activities in modeling river’s sediment in next years by using HEC-RAS. Several management approaches in different scenarios has been studied in order to control the sediment production and... 

    Hydraulic and Sediment Simulation of effect of structures On Urban Rivers In HEC-RAS (Case study :Kan River)

    , M.Sc. Thesis Sharif University of Technology Abhari Rasht Abadi, Maryam (Author) ; Agha Mohammad Hossein Tajrishi, Massoud (Supervisor) ; Torabi, Oveis ($item.subfieldsMap.e)
    Abstract
    Construction of some structures including parks, bridges and leading walls conducted on the rivers in urbanization leads to the change in the form of the rivers and consequently the change in the hydraulic.The response of river to these changes which are in the form of changes in morphologic features seems to pose some threats such as flood, damage to the buildings located on the route, weakening the bridge of highways and aggradation and degradation of the ecosystem. Kan river, one of the biggest urban rivers in the mega city of tehran, has had some changes such as resort purposes, canalization, the change of slip and roughness and intersection with different bridges during recent... 

    Improved algebraic solution for elliptic localization in distributed MIMO radar

    , Article 26th Iranian Conference on Electrical Engineering, ICEE 2018, 8 May 2018 through 10 May 2018 ; 2018 , Pages 383-388 ; 9781538649169 (ISBN) Noroozi, A ; Sebt, M. A ; Hosein Oveis, A ; Amiri, R ; Sharif University of Technology
    Institute of Electrical and Electronics Engineers Inc  2018
    Abstract
    In this paper, the problem of locating a target in a distributed multiple-input multiple-output radar system using bistatic range measurements is addressed. An algebraic closed-form two-stage weighted least squares solution for the considered problem is developed and analyzed. In the first stage, we establish a set of linear equations by eliminating the nuisance parameters first and then we apply a weighted least squares estimator to determine the target position estimate. In the second stage, in order to improve the localization performance and refine the solution of the first stage, an estimate of the target position estimation error is obtained. The final solution is obtained by... 

    Localization in MIMO radar with widely separated antennas: performance study

    , Article 26th Iranian Conference on Electrical Engineering, ICEE 2018, 8 May 2018 through 10 May 2018 ; 2018 , Pages 596-601 ; 9781538649169 (ISBN) Noroozi, A ; Sebt, M. A ; Amiri, R ; Hosein Oveis, A ; Sharif University of Technology
    Institute of Electrical and Electronics Engineers Inc  2018
    Abstract
    In this paper, a fundamental investigation on the performance of localization problem in a distributed multiple-input multiple-output radar system using bistatic range (BR) and angle of arrival (AOA) measurements is conducted. The study is based on the Cramer-Rao lower bound (CRLB) for the target position under Gaussian measurement noise. We attempt to approximately compute the CRLB separately in the cases of BR-only and joint BRlAOA localization schemes and determine which factors can affect the CRLB values. The three factors the transmitter/receiver placement, the number of transmitters and receivers, and noise power levels are shown to be effective on the localization performance.... 

    Physical Modeling of Effect of Liquefaction-Induced Lateral Spreading on Single Piles

    , M.Sc. Thesis Sharif University of Technology Torabi, Hooman (Author) ; Haeri, Mohsen (Supervisor)
    Abstract
    Pile foundations suffered severe damages during the past earthquakes in all around the world. These damages were more severe in laterally spreading grounds and they mostly have been observed in gently sloping grounds and coastal areas. In these cases, Pile foundations not only are subjected to structures inertial loads and kinematic loads of liquefied soil but also lateral spreading intensifies damages. Thus, in the recent decade, several researches have been conducted to investigate the behavior of pile foundations in liquefiable and laterally spreading grounds, however, some uncertainties still remain in modeling of soil-pile interaction. In this study, the effects of liquefaction- induced... 

    Existence of Global Solution for Two Models of Cancer Invasion

    , M.Sc. Thesis Sharif University of Technology Torabi, Mousa (Author) ; Hesaaraki, Mahmoud (Supervisor)
    Abstract
    In this thesis we investigating two models of cancer invasion .First, a general mathematical model of cancer invasion is presented. In this model there are three factors: tumor cell, extracellular matrix and enzyme. The model consists of a parabolic partial differential equation (PDE) describing the evolution of tumor cell density , an ordinary differential equation modeling of extracellular matrix and a parabolic PDE governing the evolution of the matrix degrading enzyme concentration. This model is investigated in two special versions for existence and uniqueness of global solutions. In the first model we neglect the remodeling term, this model is named the chemotaxis-haptotaxis model.... 

    “Determination of Economic Order and Production Quantity in Inventory System Regarding the Quality of Items”

    , M.Sc. Thesis Sharif University of Technology Torabi, Hassan (Author) ; Haji, Rasoul (Supervisor)
    Abstract
    EOQ and EPQ models have been among the most important and commonly used techniques for about 100 and 60 years respectively .But, they are involved in some assumptions that sometimes prevent them from being implemented in real situation of industry and production. One of these unrealistic assumptions is that all of items received or produced are of perfect quality. In order to overcome this constraint and make the mentioned models closer to the real environmentsome researches have been done. To this end,following the previous attemptsin this project we assumed to have destructive inspections and existence of imperfect and rejected items after rework. In our models, considering 3 circumstances... 

    Analysis and Simulation of Mars Rover Curiosity in the X and UHF Bands

    , M.Sc. Thesis Sharif University of Technology Torabi, Masoud (Author) ; Forouhar, Farzaneh (Supervisor)
    Abstract
    Mars rover Curiosity is a mobile scientific laboratory which it’s mission is to assess the biological potential of the landing site and characterize the geology of the landing region. This rover communicate to a Mars orbiter named MRO satellite in the UHF band which relies the signals to the Earth stations. Also this rover communicate to the Earth stations directly in the X band. In this thesis, we determine the technical characteristics of stations and simulate Earth-Mars radio links. So we calculate :
    1. determine the technical characteristics of Earth stations
    2. determine the technical characteristics of satellite and Curiosity
    3. Earth-Mars orbital position in the... 

    Impedance Control of a Knee Rehabilitation Exoskeleton Using Robust Adaptive Control

    , M.Sc. Thesis Sharif University of Technology Torabi, Mansour (Author) ; Vossoughi, Gholamreza (Supervisor)
    Abstract
    The present study deals with designing controller for Therapeutic Exercise Robots which belongs to larger group namely Rehabilitation robots. Therapeutic exercise robots are often realized in shape of exoskeleton robots. The main line of present research is involved with, designing controller for lower limb therapeutic exercise robots and offering and implementing technical rehabilitation ideas. Firstly, in order to have a reliable position-control, considering practical limitations (e.g. system uncertainties), a robust adaptive control has been designed. Adaptive control can deals with parameters uncertainties and covering unstructured uncertainties (e.g. disturbance and noise) can be... 

    Effect of lateral placement of ceramic and metal grains on thermal stress distribution throughout FGMS

    , Article 28th Congress of the International Council of the Aeronautical Sciences 2012, ICAS 2012 ; Volume 3 , 2012 , Pages 1878-1884 ; 9781622767540 (ISBN) Torabi, A ; Abedian, A ; Sharif University of Technology
    2012
    Abstract
    The properties of Functionally Graded Materials (FGM) are characterized by gradual variation of volume fraction of their constituents or phases over the thickness direction. They are normally ceramic in one side and metal in the other side. This kind of material has been employed as thermal barrier and also as coatings in many applications including turbine blades. Thermal stress behavior of FGMs is normally studied by simulating the material as a composite laminate where the properties ofeach layer are found by averaging the properties and volume fraction of FGM constituents through the thickness of the layer. However, it should be mentioned that the grains of FGM constituents are usually... 

    A kinetic study on the electrodeposition of nickel nanostructure and its electrocatalytic activity for hydrogen evolution reaction

    , Article Journal of Applied Electrochemistry ; Volume 40, Issue 11 , November , 2010 , Pages 1941-1947 ; 0021891X (ISSN) Torabi, M ; Dolati, A ; Sharif University of Technology
    2010
    Abstract
    The electrodeposition of nickel was studied using electrochemical techniques in different electrolytes and various agents. The voltammetry analysis clearly showed that the electrodeposition of nickel was a diffusion-controlled process associated with a typical nucleation process. The current transients represented instantaneous nucleation with a typical three-dimensional (3D) growth mechanism. Scharifker's equations were derived for instantaneous and progressive nucleation of the 3D growth of the spherical centers under diffusion-controlled condition. The number of nucleation sites increased with the increment in overpotential and Ni 2+ concentration. Atomic force microscopy was used to... 

    An Integrated Simulation-DEA Approach to Multi-criteria Ranking of Scenarios for Execution of Operations in a Construction Project

    , M.Sc. Thesis Sharif University of Technology Torabi, Mojtaba (Author) ; Mahlooji, Hashem (Supervisor)
    Abstract
    Before a construction project gets under way an attempt is made to examine different ways and scenarios for its implementation. Through such a process the more appropriate scenarios should be selected based on several criteria that are not necessarily at the same level in terms of importance. The purpose of this study is to examine different scenarios for implementing operations in the pre-construction phase of a project, based on several competing criteria with different importance levels in order to achieve a more efficient execution plan. This paper presents a new framework that integrates discrete event simulation (DES) and data envelopment analysis (DEA) to rank different scenarios for... 

    Studying the Characteristics of 2D Materials for Electronic Circuits Devices Master Thesis

    , M.Sc. Thesis Sharif University of Technology Torabi, Naghmeh (Author) ; Fardmanesh, Mehdi (Supervisor)
    Abstract
    The need for further improving the operation of the electronic and optoelectronic devices to raise the speed of the circuits, and to decrease their power dissipation, has led many researchers to investigate the structure of 2D material, such as graphene, transition metal dichalcogenides (TMDs) as MoS2, and other 2D compounds such as BN, due to their prominent electronic properties. TMDs have the highest significant potential for the next generation transistors due to their salient semiconductor characteristics such as electron mobility, band gap, and conductivity. For instance, Graphene is a favorable candidate for analog devices due to zero bandgap. Regarding the importance of bandgap in... 

    An investigation of the surface morphology of nanostructured nickel thin films prepared by electrodeposition

    , Article International Journal of Surface Science and Engineering ; Volume 10, Issue 5 , 2016 , Pages 444-455 ; 1749785X (ISSN) Torabi, M ; Dolati, A ; Sharif University of Technology
    Inderscience Enterprises Ltd  2016
    Abstract
    Nickel nanostructure thin films were electrodeposited on copper plates to investigate the fractal study. Scharifker's equations were derived for instantaneous and progressive nucleation and 3D growth of hemispherical centres under diffusion-controlled condition to calculate in situ change of fractal dimension of surface. It was assumed that the layer could be formed completely when fractal dimension of surface inclined to 2. Moreover, the fractal analysis of atomic force microscopy (AFM) images has confirmed the presumed model. Also, the power values of power spectral density (PSD) of the AFM images were determined using fast Fourier transform (FFT) algorithms. The PSD plots are approximated... 

    Thesis Submitted in Partial Fulfillment of the Requirements for the Master's Degree in TEFL

    , M.Sc. Thesis Sharif University of Technology Torabi, Fariba (Author) ; Salehi, Mohammad (Supervisor)
    Abstract
    In the last decades, Reaction Time research has been extended to cognitive science and more specifically human information-processing research and has gained momentum (Shim, 1996). The present study examined the reaction time in processing marked and unmarked structures with regard to the four types of conditionals (considered as unmarked, less marked, marked and strongly markedness, respectively) and prepositions (preposition pied piping that is considered as unmarked and preposition stranding as marked). To this end, two softwares were developed for which the items relating to conditionals were chosen from the Bernet’s test (1985) and the ones pertinent to prepositions were taken from... 

    A novel approach for robust control of single-link manipulators with visco-elastic behavior

    , Article 10th International Conference on Computer Modelling and Simulation, EUROSIM/UKSim2008, Cambridge, 1 April 2008 through 3 April 2008 ; 2008 , Pages 685-690 ; 0769531148 (ISBN); 9780769531144 (ISBN) Torabi, M ; Jahed, M ; Sharif University of Technology
    2008
    Abstract
    Overwhelming number of control laws has been studied for control of robot manipulators with rigid links and joints. However controllers designed under this assumption may not accurately control the manipulator link due to visco-elastic properties that appear in the link behavior. In this study, a novel approach for robust control of a single-link manipulator is presented to force the link to have rigid motions, while it has visco-elastic behavior. In this regard, initially robot dynamics is extracted, followed by the design of four appropriate controllers through the loop-shaping approach. The obtained model is first represented in state space, however later converted to transfer function... 

    Impedance analysis of growth and morphology of electropolymerized polypyrrole nanocomposites [electronic resource]

    , Article Journal of New Materials for Electrochemical Systems ; 2014, Volume 17, Number 2 Torabi, M. (Morteza) ; Sadrnezhaad, S. K ; Sharif University of Technology
    Abstract
    Pure polypyrrole (PPy), PPy/Al2O3 and PPy/SiO2 nanocomposites synthesized galvanostatically using different polymerization charges. Electrochemical impedance measurements of pure polypyrrole revealed that the film thickness affected the impedance responses. The characteristic frequencies vs. film thickness that obtained using Cole-Cole plots showed that electrodeposition mechanism changed from 3D to 1D after nuclei overlapping for pure PPy. Analysis of the nanocomposites impedance spectrums revealed no changes during the film growth, i.e. deposition continues 3D even after nuclei overlapping. Scanning electron microscopy (SEM) confirmed the impedance results and showed that the morphology of... 

    Integrated procurement, production, and delivery scheduling in a generalized three stage supply chain [electronic resource]

    , Article International Journal of Industrial and Systems Engineering (JISE)-Iranian Institute of Industrial Engineering ; 2009, Vol. 3, No. 3, pp. 189-212 Nikandish, N. (Nasser) ; Eshghi, Kourosh ; Torabi, S. Ali ; Sharif University of Technology
    Abstract
    In this research, we investigate a three-stage supply chain with one supplier, several manufacturers and multiple retailers where the supplier provides a common raw material to each manufacturer, who in turn uses a single stage production facility to convert it into final products that are delivered at fixed lot sizes to retailers. An integrated economic procurement, production, and delivery model is developed whose objective is to find the common production cycle length, production sequences of final products at manufacturers and delivery frequencies of final products to retailers minimizing the total costs of considered supply chain. We propose an analytical solution procedure and an... 

    An accurate derivation of spatial green's function for finite dielectric structures using characteristic green's function-perfectly matched layer method

    , Article IEEE Transactions on Antennas and Propagation ; Vol. 62, Issue. 6 , 2014 , pp. 3201-3211 ; ISSN: 0018926X Torabi, A ; Shishegar, A. A ; Sharif University of Technology
    2014
    Abstract
    A closed-form spatial Green's function for a truncated dielectric slab is derived by using a combination of the characteristic Green's function (CGF) and perfectly matched layer (PML) method. The original structure is terminated by PML that is backed by perfect electric conductor (PEC) in semi-infinite layer at the top and/or bottom. The eigenmodes of the closed structure by PML construct the continuous spectrum contribution of the original structure efficiently. Derived Green's function is exact for separable finite structure while it is approximate for nonseparable one especially in the corners. Generalized scattering matrix (GSM) of truncating surface which contains possible conversions... 

    An efficient 2D rough surface scattering analysis using strong harmonics extraction and the Kirchhoff approach

    , Article Applied Computational Electromagnetics Society Journal ; Volume 29, Issue 2 , 1 February , 2014 , Pages 163-169 ; ISSN: 10544887 Torabi, A ; Shishegar, A. A ; Sharif University of Technology
    2014
    Abstract
    An efficient method for scattering analysis from slightly rough surfaces is introduced. This method can be used in ray tracing algorithm where the computational efficiency is important due to the complexity and size of problems. In this method, the Kirchhoff approach is used for a periodic extension of the finite surface, which is approximated by strong harmonics of its Fourier series. Typical asphalt surfaces are analyzed by this method in millimeter-wave band and validated with the method of moments. The dominant scattering angles and ray widths of the scattered field can be easily used in ray tracing algorithm. The computation time and accuracy of results show that this method can be used...