Sharif Digital Repository

This study considers a two-echelon inventory system with one central warehouse and a number of non-identical retailers with Poisson demands, constant lead times, and lost sales for a single item. The warehouse works as a cross-docking terminal with no inventory and coordinates shipments to retailers. We apply the Joint order (1, T) policy in such an inventory system. In the standard (1, T) policy, the warehouse sends one unit of the item to each retailer in a fixed cycle time, which is calculated by considering each retailer separately. In the joint order (1, T) policy, the warehouse decides to replenish one unit of the item for each retailer in a cycle time which is adjusted to be an... 

Hydroxyapatite is the most important bio ceramic, due to its structure and chemical composition which is similar to bone. Since feeble fracture toughness, brittleness and low tensile strength have restricted their use, for overcoming this problem, they were often used as a secondary component. HAp-Al2O3 nano-composite powder combined the benefits of biocompatibility of HAp and high strength of Al2O3. When HAp-Al2O3 nano-composite powders were sintered at a higher temperature than 1100- 1200°C, HAp was decomposed and converted to the second phase of TCP, due to the formation of calcium aluminate increasing decomposition speed of HAp to TCP at higher degree than 1100-1200°C temperatures;... 

Voice activity detection is an important step in some speech processing systems, such as speech recognition, speech enhancement, noise estimation, speech compression ... etc. In this paper a new voice activity detection algorithm based on wavelet transform is proposed. In this algorithm we use the energy in each sub band, and by two methods we extract feature vector from these values. Experimental results demonstrate advantage over different VAD methods. ©2008 IEEE  

In current study, microstructure and high-temperature mechanical properties of ZK60 magnesium alloy reinforced by SiC whiskers were investigated after casting, the KOBO extrusion and aging processes. For this purpose, ZK60/SiCw composite specimens were prepared by stir casting technique. In order to achieve a laminar structure and improve the strength, the samples were subjected to KOBO extrusion technique and precipitation hardening, resulting in improved strength and increased ductility. The former is due to grain refining and formation of precipitates in the microstructure, while the latter is attributed to grain refining and formation of laminar structure. To evaluate the strength of the... 

In the present work, graphene oxide (GO) and reduced graphene oxide (RGO) were incorporated at low-density polyethylene (LDPE)/ethylene vinyl acetate (EVA) copolymer blend using solution casting method. Monolayer GO with 1-nm thickness and good transparency was synthesized using the well-known Hummers's method. Fourier transform infrared and X-ray photoelectron spectroscopy data exhibited efficient reduction of GO with almost high C/O ratio of RGO. Scanning electron microscopy showed the well distribution of GO and RGO within LDPE/EVA polymer matrix. The integrating effects of GO and RGO on mechanical and gas permeability of prepared films were examined. Young's modulus of nanocomposites are... 

In this paper, the problem of placing a minimum number of phasor measurement units (PMUs) in a transmission system is considered so that faults on all lines of the network can be diagnosed and located irrespective of their locations. For this purpose, a PMU placement algorithm is applied to calculate the required data for impedance-based fault location of any fault line in the network, achieving the full potential of the circuit laws throughout the system. Another algorithm is then proposed to compute the voltage and current values of the fault line for fault-location purposes. Moreover, as many networks are already equipped with PMUs, the proposed algorithm makes it possible to locate... 

The current study demonstrates homogenous decorating of zinc oxide quantum dots (QDs) onto graphene oxide (GO) surface via simple chemical method. The AFM image exhibited that the prepared graphene was 0.8 nm thick and hence practically monolayer. Average size of the ZnO QDs was estimated by transmission electron microscopy around 3 nm. Instrumental and chemical analyses demonstrated formation of a strong bond between ZnO QDs and GO, through C-O-Zn and C-Zn bridges. The UV-visible spectra displayed that the introduction of graphene sheets to ZnO QDs resulted in higher absorption intensity of UV as well as widening of adsorption window toward visible light for ZnO-Graphene due to chemical... 

Carbon-doped zinc oxide/reduced graphene oxide (C-ZnO/rGO) was prepared by a facile one-pot supercritical methanol method. The synthesized C-ZnO/rGO nanocomposite with flower-like ZnO micro-rods (MRs) synergistically inherited all the advantages of carbon doping and rGO heterojunction and exhibited high photocatalytic activity for the photodegradation of methyl orange (MO) under visible light. The x-ray diffraction (XRD) results indicated that in presence of GO, a new carbon-doped phase was formed at the high temperature and pressure of supercritical methanol. The x-ray photoelectron spectroscopy (XPS) at low binding energies demonstrated that the valence band of C-ZnO-rGO is up-shifted by... 

Hematite is recognized as a promising photoanode for photoelectrochemical water oxidation to produce solar hydrogen due to its favorable properties. However, the high charge carrier recombination rate due to low electrical conductivity and sluggish oxygen reduction kinetics of pure hematite hinder its photocatalytic activity. This work proposed a new hematite-based heterostructure of Ti-Fe2O3/Fe2TiO5/FeOOH, synthesized through a hydrothermal method. The photoanode morphology was branched nanorods that expanded their surface area and improved charge transfer at the photoanode/electrolyte interface. In a novel and complement modification approach, a thin pseudobrookite interlayer was applied...