Sharif Digital Repository

So far, many activities have been done in regarding to decrease vehicles' pollution in the international level that the electric vehicles manufacture has been emphasized in recent years. According to these issues and need to decrease air and environment pollution, the use of fuel cell as a source of power generation can have a specific effect on decreasing this pollution. In our country, according to high statistics of manufacturing and offering vehicle particularly the vehicles with high pollution, there is a need to invest in the field of creating renewable (clean) energy production systems. Regarding to decrease environment pollution and according to the importance of fuel cell's... 

Nowadays, by integrating the Internet of Things systems into the daily life of humans, mankind has created a platform for providing numerous and diverse services through which life has become much simpler and more convenient. These systems have gradually become an integral part of today's life. They are used in many areas of production and service provision, such as healthcare, agricultural industry, supply chain, education system, transportation, and many others. Although these achievements have facilitated human life in many aspects, they are also associated with many security risks. Intrusion detection systems (IDS) are methods for predicting possible damage (through security attacks such... 

This thesis presents a new approach to feedback active noise cancellation. The problem of Reducing the noise level in the environment has been the focus of research over the years. Active Noise Cancellation (ANC) is one such approach that has been proposed to eliminate Noise. ANC refers to an electro acoustic approach of canceling acoustic disturbance to Produce a quieter environment. The basic principle of ANC is to introduce a canceling “anti Noise” signal that has the same amplitude but the exact opposite phase, thus resulting in Reducing the remainder noise signal. We use neural networks based on system identification And predict control to cancel acoustic noise. Canceling acoustic... 

Sigma-delta modulators have largely been implemented as discrete-time (DT) circuits because of their low sensitivity to circuit nonidealities, and their frequency scaling specification, however a continuous-time (CT) design offers significant advantage in the design of high accuracy, high speed analog to digital converters (ADC). A CT design allows for relaxed amplifier(s) bandwidth and power requirements, which enables the realization of high accuracy modulators with bandwidths of several megahertz at low power consumption. Furthermore CT modulators provide inherent anti-aliasing filtering which becomes especially important at low oversampling ratios. This thesis reports the design of a... 

Providing multimedia content to the end-user is one of the most challenging tasks in today’s digital world. Therefore choosing the best media compression method is both technically and economically important. In the context of audio codecs, MPEG-4 HE-AACv2 is capable of providing very high quality output at very low bitrates. 3GPP Enhanced aacPlus is one of the practical implementations of this codec, which is extensively adopted by several telecommunication standards as the main audio compression algorithm.
Nowadays almost every cell phone and portable digital media player includes a DSP. The C6000 family of DSPs from Texas Instruments has been exploited for the purpose of this... 

This work uses a hierarchical approach for designing the integrated UWB LNA in MOSFET technology. It first offers a brief treatment of the two important types of noise: the thermal noise of channel and the gate-induced noise, in MOSFET. Then the CS and CS-CG configurations for narrow-band LNAs are considered and the requirements for the wide-band operation in UWB are specified. Noise cancelling technique is also introduced, while five wideband prototype designs, with the noise-cancelling technique used in two designs, are re-examined and tested by simulation. Some proposed methods are then applied to these designs for better performance and obtaining practical insight. The final main... 

Embedded SRAM unit is recognized as an important block in the systems on chip. In recent years due to an abrupt increase in the number of such systems which often work with battery, the priority of designing of low power circuits has been increased. Furthermore, increase in the number of transistors in the SRAM and increase in leakage current of MOS transistors with technology scaling have rendered the SRAM into the main energy consumer (from both static and dynamic view).In the writing operation due to the full swing of bit line, the dynamic power forms the main chunk of the consumptive power. The static consumptive power mostly happens due to the leakage current of broken cells in an array... 

There are three types of Slices in an FPGA, and based on the functionality of these slices, SliceM has the most features especially for designs based on shift registers, adders, and ROMs, and from all of the slices, 25% of them are SliceM. Among the earlier designs that are FPGA-based, Anderson PUF is that is classified as a weak delay-based PUF. In Anderson’s design there always should be atleast two SliceMs that their LUTs are configured as shift registers, the Andersons PUF in some FPGA Architecture especially Series 7 FPGAs, consumes two SliceMs and two other SliceLs, so practically we are using four of our precious slices. Rather than these, in series 6 FPGAs, the design should change... 

Predicting the location of oil and gas recourses is the first challenge in the petroleum industry. One of the most popular and acceptable ways which can guide an explorer to the position of the resources is the seismic survey. By this kind of survey, geologists can observe inside of solid matter by using the ultrasound waves. The process works by sending sound waves to the surface and measuring the length it takes to be reflected from rocks underneath, then with recording these echoes by arrays of sensors, they can obtain a seismic image which has too noise, including ghosting, multiples (multiples are the waves that has been reflected more than once between the energy source and the... 

Determining the porosity, water saturation and permeability values in the reservoir rock, are major steps in the petroleum engineering and formation evaluation. Today in the oil industry, these parameters are obtained using Helium gas injection technique on core (Plug) samples. However, the coring operation is difficult and costly. In addition, there isn't the possibility of coring in some of wells, such as horizontal wells. In fact, the present research is the modelling of artificial neural networks to estimate permeability in one of the Iranian oil field reservoirs by using oil well logging data. In this research, MLP neural network has been used and for network training, the evolutionary... 

In recent years with the increase of cellular phone subscribers, demand for high capacity networks is inevitable. For this reason, different methods have been proposed to increase the channel capacity. One method which has become popular in recent years is utilizing of Smart Antenna Systems. Smart antennas basically attempt to enhance the desired signal power and suppress the interferers by beamforming toward the DOA (direction-of-arrival) of the desired signal and nullsteering in the interferences’ DOAs. Smart Antennas first find the direction of signal sources, and then put the main gain toward the desired signal and put the nulls toward unwanted signals. As a result, we can obtain the... 

Pipelines are the preferred means for transporting of liquid or gas phase materials. The economy of many countries is extremely dependent upon a large network of pipelines systems to transport and distribute the nation’s energy resources. Damages to the pipe structure may cause leakage and result in economic losses or even loss of life. Developing methods for detecting the anomalies and damages to the structure before they lead to catastrophic events is vital. Multiple pipeline misadventures over the past several years have resulted in hundreds of fatalities and billions of dollars in property damages. These accidents demonstrate that the current monitoring methods are not sufficient... 

High speed data converter are very often used in telecommunication systems. Since these systems are increasingly used in mobile foem reducing the power consumption in these circuits is of great importance. The goal of this project was to design a pipeline 10 bit converter for a sample rate 200MS/s with a power consumption of 35 mW for the input level of 1Vp-p and a 1.8V power supply in 0.18um CMOS technology.
To reach these goals, a number of low power techniqes are proposed in various levels of abstraction. In system level, the sampling and feedback capacitors is optimized analytically which leads to simple back-envelope formulas to calculate the optimum values. In circuit level, a... 

High resolution and low power analog to digital converters are used in wireless communication receivers, Sensor Networks and Medical Instrumentations. Reducing power consumption at a high conversion rate is one of the most basic challenges for these converters. Pipelined SAR structure is considered for 40-50 MS/s and 10-12 bits, and is of interest because of consuming low power and using a small area. Besides using Pipelined SAR structure, circuit level and system level modifications are also proposed to decrease the power consumption. The ADC is designed in 0.18µm CMOS technology with 1.2v supply voltage. The results show 4.5mW power consumption, when ENOB is 11.04bit, which is very low... 

Nuclear magnetic resonance is a spectroscopic method which is used to investigate characteristics of molecules with hydrogen and carbon chains. In this thesis we used, NMR spectrum extracted from 19 types of amino acids for investigating on feature generation for protein sequences. We processed NMR spectra based on Hydrogen and Carbon atoms in structure of the amino acids and after preprocessing we extracted features for each amino acid from the spectra. After that, we tried to cluster the amino acids with Fuzzy Clustering Method (FCM) then we generated feature vectors by extracting special descriptor for amino acids in sequence of proteins. In addition to NMR, we used the features of... 

The millimeter wave (mmWave) band, a prime candidate for 5G cellular networks, seems attractive for wireless energy harvesting since it will feature large antenna arrays and extremely dense base station (BS) deployments. The viability of mmWave for energy harvesting though is unclear, due to the differences in propagation characteristics, such as extreme sensitivity to building blockages. But in this research, a scenario is considered in which low-power devices extract energy and/or information from the mmWave signals. Using stochastic geometry, analytical expressions are derived for the energy coverage probability, the average harvested power, and the overall (energy-and-information)... 

This Project deals with the Low-Noise Amplifier (LNA) and High-Q Band-Stop filter for a UWB receiver designed using a standard 0.18um CMOS process. These LNAs cover the frequency band of 1 to 11 GHz. Stringent sensitivity and low noise figure requirements, presence of strong in-band interferers and the ultra wide band operation are the main design challenges of the receiver and the LNA. In this thesis, Three LNAs with good performance and good input matching are designed. Two of them used Common gate topology with gm-Boosting technique to reduce the noise figure. Also because of wide bandwidth requirement, the bandwidth of these LNAs is improved by Inductive shunt and series peaking... 

Concerns like fuel cost, pollution and global warming has made it necessary to look for new energy solutions. Renewable and alternative energies have proven themselves to be helpful in this matter. Renewable energy(RE) is the energy that comes from natural resources such as sunlight, wind, rain, tides, waves and geothermal heat, which are naturally replenished at a constant rate. Renewable energies are environmentally friendly, not cheap at the beginning but naturally available in a constant rate and wide spread, unlike fossil fuels that are localized in the limited places. In this thesis in order to generate environmental friendly power we consider two renewable energy resources: wind and... 

The explosive growth of battery operated devices has made low-power design a priority in recent years. Moreover, embedded SRAM units have become an important block in modern SoCs. The increasing number of transistor count in the SRAM units and the surging leakage current of the MOS transistors in the scaled technologies have made the SRAM unit a power hungry block from both dynamic and static perspectives. One of the key strategies for reducing power consumption is reducing the supply voltage to near or below the threshold voltage of the transistor. However, as supply voltage decreases to tackle the power consumption, the data stability of the SRAM cells have become a major concern in recent... 

A large number of sensors are spread for monitoring of an area in a random manner. The aim is to have an efficient design for energy that can protect the coverage of the area. A number of sensor nodes that have high density and which are in the area have the duty of monitoring of the area. The aim of this process is to determine of maximum number of separate collections that they have a direct influence upon the life span of the network. The idea behind this approach is that the nodes in areas with low availability are less used as a data routing as well as nodes that have remaining energy. In order to reach this objective, the importance of each sensor node for its duty of protecting...