Sharif Digital Repository

The taping mode Atomic Force Microscopic (T-AFM) can be assumed as a cantilever beam which its base is excited by a sinusoidal force and nonlinear potential interaction with sample. Thus the cantilever may cause chaotic behavior which decreases the performance of the sample topography. In order to modeling, using the galerkin method, the PDE equation is reduced to a single ODE equation which properly describing the continuous beam. In this paper a nonlinear delayed feedback control.is proposed to control.chaos in T-AFM system. Assuming model parameters uncertainties, the first order Unstable Periodic Orbits (UPOs) of the system is stabilized using the sliding nonlinear delayed feedback... 

The taping mode Atomic Force Microscopic (T-AFM) can be assumed as a cantilever beam which its base is excited by a sinusoidal force and nonlinear potential interaction with sample. Thus the cantilever may cause chaotic behavior which decreases the performance of the sample topography. In order to modeling, using the galerkin method, the PDE equation is reduced to a single ODE equation which properly describing the continuous beam. In this paper a nonlinear delayed feedback control is proposed to control chaos in T-AFM system. Assuming model parameters uncertainties, the first order Unstable Periodic Orbits (UPOs) of the system is stabilized using the sliding nonlinear delayed feedback... 

The authors would like to declare that this investigation was supported by Shahid Beheshti University G.C., research grant. NO. 600/51. The authors would like to apologise for any inconvenience caused. DOI of original article: https://doi.org/10.1016/j.apsusc.2018.03.249 © 2018  

Here in, reduced graphene oxide/g-C3N4/Ag2O nano structure (RGO/CAO) was decorated through a facile and simple chemical method. After that RGO/CAO nano structure combined with poly aniline electrochemically to form a composite electrode. Several physicochemical techniques were applied to characterize the composite electrode such as X-ray Diffraction (XRD), Fourier Transform Infra-Red spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). Furthermore, several electrochemical techniques were used to study the performance of composite electrode as an electrochemical capacitor. Results show that RGO/CAO nano... 

Photocatalytic reduction of p-nitrochlorobenzene was studied over aluminosilicate-based AgBr and AgBr-TiO2 photocatalysts which were prepared and characterized. The photoreaction was performed in the presence of LiBH4, which is a strong reducing agent, in the solution medium. A new mechanism is proposed for reduction of p-nitrochlorobenzene under photocatalytic conditions. The effect of pH, illumination source, LiBH 4 concentration, temperature, catalyst dosage, and alcoholic scavengers was also studied. The results showed that the best efficiency was obtained over Ag/AgBr/TiO2/aluminosilicates at natural pH under UV light. We observed that the reaction yield was affected by changing the... 

Mordenite (MOR) nanocrystals were synthesized using the hydrothermal method. Sol-gel and deposition methods were utilized to modify the zeolite surface with TiO2 and then AgBr or AgCl particles. Photocatalysts were characterized by using X-ray diffraction, Brunauer-Emmett-Teller (BET), and scanning electron microscopy techniques. Activity was evaluated by photodegradation of Acid Blue 92 as an azo dye. The effect of silver halide deposition on the photocatalytic behavior of the prepared nanocomposites was studied under both ultraviolet (UV) and visible light, and the results were compared. The results showed that AgCl/TiO2/MOR was more active under UV, while with visible source,... 

Solvatochromic UV-vis shifts of three probes 4-nitroaniline, 4-nitroanisol, and Reichardt's dye in binary mixtures of polyethylene glycol p-(1,1,3,3-tetramethylbutyl)-phenyl ether (Triton X-100 or TX-100) with methanol, ethanol, 1-propanol, and water have been investigated at 298 K. Structural and intermolecular interactions of solvatochromic probes were determined in these systems. Solvatochromic parameters, including normalized polarity (ETN), dipolarity-polarizability (π∗), hydrogen-bond donor (α), and hydrogen-bond acceptor (β) abilities, were measured at a wide range of mole fraction (0 ≤ X ≤ 1) with 0.1 increment. Interestingly, a similar behavior of ETN and α is observed in... 

The behaviour of solvatochromic absorbance probes (4-nitroaniline, 4-nitroanisole, and Reichardt's dye) within binary mixtures of polyethylene glycol p-(1,1,3,3-tetramethylbutyl)-phenyl ether (Triton X-100 or TX-100)/organic solvents (2-propanol, hexanol, butyl acetate, THF, toluene, and p-xylene) was extensively explored by using solvatochromism and the quantum theory of atoms in molecules (QTAIM). To be more precise, the polarity parameters, ET N, and Kamlet-Taft parameters, such as the hydrogen bond donor ability (HBD) (α), hydrogen bond acceptor ability (HBA) (β), and dipolarity/polarizability (π∗), have been investigated in selected mixtures at 298 K. All binary mixtures exhibit complex... 

The influences of hydroxyl functional group (-OH) on the thermodynamic and structural properties of ionic liquids (ILs) composed of 1-(2-Hydroxyethyl)-3-methyl imidazolium ([C2OHmim](+)) cation and the six different conventional anions, including [Cl](-), [NO3](-), [BF4](-), [PF6](-), [TfO](-), and [Tf2N](-) have been extensively investigated using classical molecular dynamics (MD) simulations combined with ab initio calculations over a wide range of temperature (298-550 K). The volumetric thermodynamic properties, enthalpy of vaporization, cohesive energy density, Hildebrand solubility parameter, and heat capacity at constant pressure were estimated at desired temperature. The simulated... 

XFe2O4 magnetic nanoparticles (X = Mn, Fe, Co, Ni, and Zn) were prepared by using two methods: coprecipitation and hydrothermal. The synthesized nanoparticles were compared according to the separation in an external magnetic field and finally, the hydrothermal method was specified as a better synthesis method. The magnetic nanoparticles were characterized by physico-chemical analysis methods such as Vibrating Sample Magnetometer (VSM), X-ray diffraction (XRD), Fourier Transform Infrared spectroscopy (FTIR), nitrogen adsorption-adsorption isotherm and Transmission Electron Microscopy (TEM). Magnetic properties of synthesized nanoparticles were studied by ab-initio theoretical methods to... 

Mordenite (MOR) nanocrystals were synthesized using the hydrothermal method. Sol–gel and deposition methods were utilized to modify the zeolite surface with TiO2 and then AgBr or AgCl particles. Photocatalysts were characterized by using X-ray diffraction, Brunauer–Emmett–Teller (BET), and scanning electron microscopy techniques. Activity was evaluated by photodegradation of Acid Blue 92 as an azo dye. The effect of silver halide deposition on the photocatalytic behavior of the prepared nanocomposites was studied under both ultraviolet (UV) and visible light, and the results were compared. The results showed that AgCl/TiO2/MOR was more active under UV, while with visible source,... 

Photocatalytic reduction of p-nitrochlorobenzene was studied over aluminosilicate-based AgBr and AgBr-TiO2 photocatalysts which were prepared and characterized. The photoreaction was performed in the presence of LiBH4, which is a strong reducing agent, in the solution medium. A new mechanism is proposed for reduction of p-nitrochlorobenzene under photocatalytic conditions. The effect of pH, illumination source, LiBH4 concentration, temperature, catalyst dosage, and alcoholic scavengers was also studied. The results showed that the best efficiency was obtained over Ag/AgBr/TiO2/aluminosilicates at natural pH under UV light. We observed that the reaction yield was affected by changing the... 

Because of the compatibility with tandem devices and the ability to be manufactured at low temperatures, inverted perovskite solar cells have generated far-ranging interest for potential commercial applications. However, their efficiency remains inadequate owing to various traps in the perovskite film and the restricted hole blocking ability of the electron transport layer. Thus, in this work, a wide-bandgap n-type semiconductor, 4,6-bis(3,5-di(pyridin-4-yl)phenyl)-2-phenylpyrimidine (B4PyPPM), to modify a perovskite film via an anti-solvent method is introduced. The nitrogen sites of pyrimidine and pyridine rings in B4PyPPM exhibit strong interactions with the undercoordinated lead ions in...