Sharif Digital Repository

In the study, the daily and monthly performance of a photovoltaic thermal system integrated with phase change material is investigated in Shanghai, China. A three-dimensional model of photovoltaic thermal system integrated with phase change material system is developed and numerically simulated. Water is considered as working fluid, and the fluid flow regime is laminar and incompressible. Both quasi-steady and transient models are compared together, and the transient model is selected because of its higher accuracy. Validation analysis is performed on the numerical model to show the reasonable agreement of current research compared to some other research. After obtaining the suitable... 

Symmetric T junctions have been used widely in microfluidics to generate equal-sized microdroplets, which are applicable in drug delivery systems. A newly proposed method for generating unequal-sized microdroplets at a T junction is investigated theoretically and experimentally. Asymmetric T junctions with branches of identical lengths and different cross sections are utilized for this aim. An equation for the critical breakup of droplets at asymmetric T junctions and one for determining the breakup point of droplets are developed. A good agreement was observed between the theories (present and previous) and the experiments  

Today, MEMS have wide applications in modern technologies. Magneto hydro dynamic (MHD) micropumps play an important role in the MEMS industry and have been thoroughly studied in the recent years. In this study, the idea of classic reciprocating micropumps was combined with magneto hydro dynamics (MHD) to develop a novel Magneto Mercury Reciprocating (MMR) micropump. To attain this goal, the Lorentz force, as the actuation mechanism, was used to move a conductive liquid (mercury) slug in a reciprocating manner in order to suck the working fluid (air) from the inlet and pump it to the outlet. The performance of the fabricated MMR micropump was examined in terms of parameters such as pressure... 

A reciprocating single-chamber micropump is designed and experimentally tested. The actuation technique of the pump is based on Lorentz force acting on an array of low-weight microwires placed on a flexible membrane surface. A square-wave electric current (5.6 and 7.8 A) with a low-frequency range (5.6 to 7.6 Hz) is applied through the microwires in the presence of a perpendicular magnetic field (0.08 to 0.09 T). The resultant oscillating Lorentz force causes the membrane to oscillate with the same frequency, and pushes the fluid to flow toward the outlet using a high-efficiency ball-valve. The micropump has exhibited a maximum efficiency of 2.03% with a flow rate as high as 490 μl/s and... 

The solar collectors absorb solar irradiation and then produce thermal energy; however, they cannot generate electrical power. Electricity and thermal energy can be produced by the photovoltaic thermal module, simultaneously, while the outlet temperature of the photovoltaic thermal module is not usually high enough to provide thermal requirements of a building such as hot water or space heating. This work proposes a novel compound system created by the connection of a solar collector in series with a photovoltaic thermal module to resolve the issue of low outlet temperature in the photovoltaic thermal module and lack of electrical power in solar collectors. To examine the feasibility of this... 

Because of the low outflow temperature of the conventional photovoltaic thermal systems and lack of electrical production of the solar thermal collectors, a novel combined system is proposed to solve the two mentioned drawbacks. This novel system is achieved by connecting a photovoltaic thermal unit to a solar thermal collector in series. To increase the overall performance of this novel combined system, different hybrid nanofluids include (1) multiwall carbon nanotube-aluminum oxide (2) multiwall carbon nanotube-silicon carbide (3) graphene-aluminum oxide, and (4) graphene-silicon carbide are compared. The investigation is performed based on the three-dimensional simulation, and the... 

Convection heat transfer below a horizontal, hot, and isothermal strip of infinite length and width of 2L embedded in fluids with different Prandtl number (Pr) and Nusselt number (Nu) is analyzed with the aid of integral method. A new concept is utilized to determine the boundary layer thickness at the strip's edge, which is based on matching the flow rate of the boundary layer below the strip at its edge and the flow rate of the plume, which forms after the heated fluid detaches from the strip's edge. In addition to these novelties, a numerical model is developed to verify the analytical framework, and an excellent agreement is observed between the analytical and numerical models  

In this paper, a comprehensive three-dimensional model of photovoltaic thermal system integrated with phase change material (PVT/PCM) is developed and simulated. The effect of some key parameters using parametric analysis on performance of PVT/PCM system with water as working fluid is investigated. Parameters considered in this study include the properties of PCM (i.e. melting temperature, enthalpy of fusion and thermal conductivity), solar radiation and mass flow rate. The parametric analysis ranges are selected according to the properties of the most of available PCMs on the market, which shows the practical application of the numerical research. Furthermore, a three-dimensional model of... 

The bifacial photovoltaic/thermal module is an emerging concept that can provide electricity and heat simultaneously, taking advantage of both front and rear sides of the panel; therefore, exhibiting a better performance compared to a conventional photovoltaic module or photovoltaic thermal module. In this study, four configurations of the bifacial photovoltaic/thermal module with different cooling methods have been proposed, i.e., cooling performed at either the upper or the lower surface, in parallel (applied to both upper and lower surfaces having similar start/endpoints), and swinging air back and forth (by guiding the air over the upper and lower surfaces, respectively). The...