Sharif Digital Repository

The behavior of pile foundations under earthquake loading is an important issue that affects the performance of structures. Design procedures have been developed for evaluating pile behavior under earthquake loading; however, the application of these procedures to cases involving liquefiable ground is uncertain. The performance of piles in liquefied soil layers is much more complex than that of non-liquefying soil layers because not only the superstructure and the surrounding soil exert different dynamic loads on pile, but also the stiffness and shear strength of surrounding soil diminishes over time due to both non-linear behavior of soil and pore water pressure generation. In this... 

The main purposes of this project are simulation, design, and fabrication of a microfluidic system based on dielectrophoresis (DEP) exploiting AC voltages for separation of microparticles. Generally, this project can be divided into two parts. First, the engineering section including design and fabrication of microchip, and second biological samples preparation for investigating the system performance. The main advantages of proposed system are eliminating joule heating, a significant problem in insulating based dielectrophoresis systems, overcoming problems related to metal contamination in biological samples, the main problem of conventional dielectrophoresis platforms, and removing... 

Unsupervised neural spike sorting is a crucial tool in studying neural systems in the resolution of a neural cell. In extracellular recording from neural cells, the voltage of media is captured by the electrodes. The situation is possible that an electrode record activity of multiple neurons at the same time. The spike sorting goal is assigning each spike (extracellular recorded neural action potential) to a neural cell that generates it. Conventionally, more than one electrode is used to recording media voltages. The electrodes are placed in a small space as a single device called a multi-electrode array. After the spike sorting procedure, the occurrence time of activity of several cells is... 

Soil-structure interaction has significant effect on dynamic behavior of the super structure. This effect is usually investigated in two separate parts, i.e., the Kinematic Interaction effect and the Inertial Interaction effect. The first modifies the input ground motion to the foundation as a result of difference in soil and foundation stiffness. The later, i.e., the II effect, introduces the effect of soil flexibility and radiation of waves into the supporting medium on the response of the structure. These effects are usually considered by introducing a replacement oscillator with modified natural period and damping ratio subjected... 

The abstract is the most important section of the thesis because many readers limit most of their reading to abstracts, saving in-depth reading for specific theses. It should give the reader a "preview" of what's to come. The abstract should emphasize new and important aspects of the study or observations. The purpose of the abstract is to allow researchers to decide whether or not to read the whole thesis. The abstract is what researchers read first to decide if the thesis is important, interesting, and it allows them to assess the relevance of a thesis to their own research, without having to read the entire thesis. Thus, it is crucial that the abstract both summarize succinctly the key... 

Nowadays we are witnessing the emergence of machine learning in various applications. One of the key problems in data science and machine learning is the problem of dimensionality reduction, which deals with finding a mapping that embeds samples to a lower-dimensional space such that, the relationships between the samples and their properties are preserved in the secondary space as much as possible. Obtaining such mapping is essential in today's high-dimensional settings. Moreover, due to the large volume of data and high-dimensional samples, it is infeasible or insecure to process and store all data in a single machine. As a result, we need to process data in a distributed manner.In this... 

In this study effect of various mullite contents, as reinforcement phase, on phase combination, fracture surface and mechanical propertiese of hydroxyapatite- mullite composite has been investigated.
The used hydroxyapatite powder was synthesized through acid- base route and further calcination. XRD results demonstrated partially decomposition of HA in to β- TCP and CaO during the calcination. SEM image of the prepared HA powder showed that they were spherical and agglomarated.
The mixed HA with various amounts of the ball- milled mullite (10- 40 wt%)were pressed and sintered at 1350°C for 2h. Dominant phase in all composite samplese after sintering was Ca9Al(PO4)7.
Phase... 

One of the major reasons causing cracks in external surfaces of concrete arch dams are thermal loads. Therofore, in order to avoid instabilities due to function of thermal loads in association with hydrostatic and hydrodynamic pressures, a precise evaluation of temperature distribution through dam body is indispensable. In this study, effects of thermal loads mostly on upstream surface of Karun-3 concrete arch dam in Iran were examined using a 3-D finite element method considering water level fluctuations. Also the influence of operatvie boundry conditions in our problem which are water temperature, air temperature and solar radiation was precisely taken into account. Moreover, nonlinear... 

The classical economic batch quantity (EBQ) model assumes that all produced items have a perfect quality. But in real-life production systems, generation of defective items is inevitable. A portion of these defective items is considered to be scrap , while the other is assumed to be reworkable and reworking them can reduce costs and increase productivity. In this thesis we have studied the economic batch quantity for a single stage production system with rework and scrapping . We want to satisfy the customer demand and minimize total costs of the system like set up costs , production costs , rework costs , holding costs , shortage costs and scrapping costs . In the first chapter of this... 

In this thesis, based on the taking-off and landing of aircraft with GE 21-J85 turbine, the low cycle fatigue (LCF) test for superalloy used in first stage blades is considered. The LCF tests were performed on both coated and uncoated Rene 80 which are used in GE 21-J85 turbine at R = (min/max) = 0, strain rate of 2 10-3 s-1 and 760oC, 871oC and 982oC. To produce specimens, an investment casting method was used so that adequate amount of polycrystalline round bars could be obtained. The specimens were all homogenized and solution treated. After the inspection, some specimens were coated with pack cementation method in CODEP-B powder in H2 atmosphere. The coated and uncoated specimens all... 

In this thesis, two-level optimal control of uncertain and non-uncertain large-scale systems is presented. In the proposed two-level approach, using a decomposition/coordination framework, the large-scale system is first decomposed into several interactive subsystems, at the first-level, where a smaller optimization problem is solved at each subsystem. At the second-level, a substitution type prediction method, as a coordination strategy, is used to predict the interaction between subsystems. The coordinator mainly evaluates the next update for the coordination parameters and continues to exchange information with the first-level, so that the overall optimum solution is obtained. It is shown... 

In this study a layer with compressive residual stress was created by severe shot peening and hence surface grains was changed to nanostructure. Fatigue life will be increased as a result of compressive residual stress. Surface roughness increase, is one of the disadvantages of severe shot-peening process. Re-shot-peening with the smaller shots and lower intensity is proposed for reducing surface roughness. Numerical simulation as a powerful method, used to investigate the effects of shot-peening parameters on the residual stress distribution, surface roughness and grain size. Obtained results indicate that more energy in process can improve residual stress distribution and grain size unlike... 

A special steel beam-to-column connection, named Khor-jini, is commonly used for steel framing system in Iran. In this system, two continuous beams are passed next to the columns and are connected to the column side using seated brackets.This type of connection has been common in Iran from the late past. Unfortunately, the seismic behavior of Khorjini frames had not been sufficiently studied prior to Manjil Earthquake of 1990. Due to very large damages which occurred in steel structures especially in connections during the said earthquake, the seismic behavior of this type of connection was studied and some of its weak points were recognized.In this study non-linear... 

Due to the growing need for plasmonic wavs in microwave and terahertz spectra, a periodic arrangement of one-dimensional cut-through slits is investigated and an equivalent model based on the effective medium theory is derived. In contrast to the all previous attempts that were successful in mimicking only the zeroth-order diffracted waves, the proposed effective medium is capable of mimicking all diffraction orders. The parameters of the equivalent model are established by comparing the scattered waves of the semi-homogeneous medium and those of the main structure obtained by invoking the rigorous mode matching approach based on the single mode approximation inside the slits. This medium is...