Sharif Digital Repository

Visual attributes are great means of describing images or scenes, in a way both humans and computers understand. In order to establish a correspondence between images and to be able to compare the strength of each property between images, relative attributes were introduced. However, since their introduction, hand-crafted and engineered features were used to learn increasingly complex models for the problem of relative attributes. This limits the applicability of those methods for more realistic cases. We introduce a deep neural network architecture for the task of relative attribute prediction. A convolutional neural network (ConvNet) is adopted to learn the features by including an... 

Multiple human 3D pose estimation is a challenging task. It is mainly because of large variations in the scale and pose of humans, fast motions, multiple persons in the scene, and arbitrary number of visible body parts due to occlusion or truncation. Some of these ambiguities can be resolved by using multiview images. This is due to the fact that more evidences of body parts would be available in multiple views. In this work, a novel method for multiple human 3D pose estimation using evidences in multiview images is proposed. The proposed method utilizes a fully connected pairwise conditional random field that contains two types of pairwise terms. The first pairwise term encodes the spatial... 

Multiple human 3D pose estimation is a challenging task. It is mainly because of large variations in the scale and pose of humans, fast motions, multiple persons in the scene, and arbitrary number of visible body parts due to occlusion or truncation. Some of these ambiguities can be resolved by using multiview images. This is due to the fact that more evidences of body parts would be available in multiple views. In this work, a novel method for multiple human 3D pose estimation using evidences in multiview images is proposed. The proposed method utilizes a fully connected pairwise conditional random field that contains two types of pairwise terms. The first pairwise term encodes the spatial... 

The electrodeposition of cobalt, nickel and Ni-Co alloys was studied by electrochemical techniques. Cyclic voltammetry and current transient measurements were used to characterize the Co-Ni system in other to obtain the nucleation and growth mechanism. The cyclic voltammetry results clearly showed that electrodeposition of cobalt, nickel and Co-Ni alloy is diffusion-controlled process with a typical nucleation mechanism. The redox potentials of the Co and Ni are shifted to more cathodic potentials in the Co-Ni alloy system. In addition, the current transients revealed that nucleation mechanism is instantaneous with a typical three-dimensional (3D) nucleation and growth process. The number of... 

An efficient electrocatalyst for Pt-free I−/I3 − reduction has been synthesized by high temperature treatment of graphene oxide-cobalt phthalocyanine mixtures. The graphitic material was characterized by various techniques and was found to consist of reduced graphene oxide carrying CoN3 entities, obtained by thermal decomposition of cobalt phthalocyanine. This material had an ionization potential equal to 4.9±0.1 eV and thus it was judged appropriate to act as reduction electrocatalyst for the I−/I3 − redox electrolyte. It was subsequently deposited as thin film on FTO electrodes, which were employed as counter electrodes for dye-sensitized solar cells. Its capacity to reduce I−/I3 − redox... 

Herein, we report a modified two-step method to construct a uniform and pinhole-free polycrystalline perovskite film with large grains up to the microscale using lead mixed-halide (PbI2-PbCl2) precursor solutions to guarantee the device functioning. Commonly used sequential deposition methods based on dip- and spin-coatings are combined with a vapor-assisted solution process to improve the perovskite morphology and tune the residual lead mixed-halides. These can enhance the optical absorption and efficiency of perovskite solar cell (PSC) devices. The impact of the Cl content in the lead mixed-halide precursors and the employed preparation methods on the photovoltaic performance of PSCs are... 

Herein, we demonstrate a facile low temperature approach to prepare a gel polymer electrolyte (GPE) based on the triiodide/iodide redox couple in a quasi-solid-state dye-sensitized solar cell (DSSC). Only one polymeric agent (i.e., hydroxypropyl cellulose (HPC)) is used for the preparation of a non-volatile GPE system for the standard liquid electrolyte containing 1-methyl-3-propylimidazolium iodide (MPII). The prepared GPE completely penetrates into a TiO2 photoanode at room temperature due to the uniform distribution of Ti, Ru and I elements in the cross-section of the electrode, forming an interpenetrating GPE/TiO2 network to access all dye molecules. The GPE with the optimum HPC : MPII... 

The Cu surface segregation is investigated in the electrodeposited Ni-Fe layers using X-ray photoelectron spectroscopy (XPS), Auger electron spectroscopy (AES), secondary ion mass spectroscopy (SIMS) and atomic force microscopy (AFM). The results indicate that Cu segregation and accumulation take place in areated and deareated baths and the amount of segregated copper increases after air exposure. This phenomenon is explained by lower interfacial tension of the Cu in comparison with Ni and Fe. Our results reveal more surface segregation in the electrodeposit than vacuum reported results. This should be due to interface charging and higher surface diffusion in applied potential. The effect of... 

Copper phthalocyanine can effectively act as alternative small molecule hole transporting material in perovskite solar cells. In order to produce solution processed devices, a soluble copper phtalocyanine has been synthesized by n-butyl substitution and it was compared to commercially available tert-butyl substituted copper phthalocyanine. It was found that the configuration of the butyl chain plays a very important role in film conductivity and in the subsequent efficiency of solar cells, n-bytyl derivative being the most effective hole transporter. Such a result is due to the fact that n-butyl derivative allows better packing of the molecules in the film and stronger π-π interaction  

Herein, we report a new strategy for improving the efficiency and reducing the fabrication cost of dye-sensitized solar cells (DSCs) by elimination of the three- or four-fold layer deposition of TiO2. This is performed by replacing a single layer deposition of mesoporous TiO2 beads, with sub-micrometer size, high surface area and tunable pore size, synthesized by a combination of sol-gel and solvothermal methods. Furthermore, superior electronic properties gained by a reduction in electronic trap states are achieved through doping of pristine TiO2 beads with lithium. The beads have a spherical shape with monodispersed texture consisting of anatase-TiO2 nanocrystals and ultra-fine pores. The...