Loading...
Search for:
nikparto--ali
0.119 seconds
Total 2312 records
Analysis of Effective Algorithms In Social Networks
, M.Sc. Thesis Sharif University of Technology ; Safari, Mohammad Ali (Supervisor)
Abstract
A social network is a social structure made up of individuals (or organizations) called ”nodes”, which are tied by one or more specific types of interdependency. These networks are new forms of distributed larg media which actually plays a critical role in distributing information and news among the people. because of the size and autonomos aspect of these kind od medias, taking control of them seems impossible. with the best hope we could think of some ways to detect information cascades through network.for example we could select a set of nodes as sensor inorder to detect information cascades as effectively as possible. in this thesis we studied cascade detection problem in scenario based...
Multi-layered nature of the wall of the carotid-artery bifurcation on hemodynamic and mechanical stress and strain
, Article 2011 18th Iranian Conference of Biomedical Engineering, ICBME 2011 ; 2011 , Pages 84-89 ; 9781467310055 (ISBN) ; Firoozabadi, B. D ; Sharif University of Technology
2011
Abstract
Arterial diseases, namely atherosclerosis, are believed to be a product of abnormal changes in both hemodynamic and non-hemodynamic factors. In order to explornmk,e the role of different factors in initiation and progression of this disease, a CFD technique was applied to study Interaction between the structure of the artery and blood flow for different suggested models that were used to describe mechanics of vessel wall. This study presents a three-dimensional, steady state simulation of blood flow through the single and double layered carotid artery bifurcation using fluid structure interaction (FSI) method. The wall shear stress and mechanical stress/strain are computed and analyzed under...
Simulation and optimization of a semi spherical air bearing
, Article ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) ; Volume 7, Issue PARTS A, B, C, D , 2012 , Pages 153-159 ; 9780791845233 (ISBN) ; Shahiri, A ; Nikparto, A ; Sharif University of Technology
2012
Abstract
It is important to test the attitude control systems on satellites before they are launched in space. Traditionally this has been done by dropping the satellite, and firing the thrusters before the satellite makes a soft landing in a net. This method only allows a few seconds of testing and does not lend itself to the measurement of pointing accuracy. A better method is to mount the satellite on a spherical air bearing. In this paper behavior of a semi spherical air bearing is studied and analyzed in various conditions. These bearings are used in different applications such as simulation of approximately frictionless condition which is the satellite's situation in space. In this analysis...
Thermo-hydrodynamic modeling of a single bubble nozzle-diffuser phase change micropump
, Article 6th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM2008, Darmstadt, 23 June 2008 through 25 June 2008 ; Issue PART B , June , 2008 , Pages 1237-1243 ; 0791848345 (ISBN); 9780791848340 (ISBN) ; Saeedi, M. H ; Pirouzpanah, S ; Nikparto, A ; ASME ; Sharif University of Technology
2008
Abstract
Nowadays, the potential of phase change process in liquids at micro scale attracts the scientists to fabricate this type of micropumps. Such micropumps have widely found applications in industrial and medical equipments such as recent printers. Not using mechanical parts such as valves, and having small sizes and high and controllable mass flow rates are the advantages of these micropumps. In the nozzle diffuser phase change micropump a heat pulse generates a bubble in a chamber; therefore, the pressure pulse which is generated by the bubble, causes the bubble to expand suddenly with high rate, then the pressure of bubble reduces to the vapor pressure and causes negative rate of expansion to...
Study the Effect of Considering two Layered wall for Carotid Artery Bifurcation on Distribution of Hemodynamic and Non-Hemodynamic Parameters using a Fluid-Structure Interaction Method
, M.Sc. Thesis Sharif University of Technology ; Dehghan Firoozabadi, Bahar (Supervisor) ; Saidi, Mohammad Said (Supervisor)
Abstract
It is known today that arterial diseases are among the leading cause of death in modern societies. More than 50% of deaths in western countries are mainly occurred as results of these diseases, namely atherosclerosis. In order to study risk factors and to understand the full process of how arterial diseases initiate and progress, many research topics have been introduced and studied. Researchers believe that mechanical factors such as Wall Shear Stress (WSS), Pressure distribution, Cyclic strain, Back flow zones and many other factors are responsible for initiation of atherosclerosis. Different patterns of Wall Shear Stress and Strain are seen in arteries. Among other factors outlined in...
Technical English for mechanical engineers
, Book ; Meghdari,Ali
Sharif University Press
2014
Abstract
Local educational institutions produce in-house English for Specific Purpose (ESP) materials according to the curriculum policies designated and developed by the Ministry of Higher Education In Iran. To this end, this book aims to be used in the Iranian setting at the tertiary level for undergraduate students majoring in Mechanical Engineering. Moreover, the style of English usage in this ESP textbook is American.
Regarding the content of the textbook, it has both thematic organizations in which the topics are relevant and includes sufficient treatment of the target language areas necessary for the students. The principle organizing approach of this textbook is theme-based. In addition,...
Regarding the content of the textbook, it has both thematic organizations in which the topics are relevant and includes sufficient treatment of the target language areas necessary for the students. The principle organizing approach of this textbook is theme-based. In addition,...
Feedback control of the neuro-musculoskeletal system in a forward dynamics simulation of stair locomotion [electronic resource]
, Article Proc. of IMechE Part H: Journal of Engineering in Medicine ; 2009, Vol. 223, No. 6, pp. 663-675 Journal of NeuroEngineering and Rehabilitation ; Volume 11, Issue 1, 30 April 2014, Article number 78 ; Meghdari, Ali ; Vossough, Gholam Reza ; Sharif University of Technology
Abstract
The aim of this study is to employ feedback control loops to provide a stable forward dynamics simulation of human movement under repeated position constraint conditions in the environment, particularly during stair climbing. A ten-degrees-of-freedom skeletal model containing 18 Hill-type musculotendon actuators per leg was employed to simulate the model in the sagittal plane. The postural tracking and obstacle avoidance were provided by the proportional—integral—derivative controller according to the modulation of the time rate change of the joint kinematics. The stability of the model was maintained by controlling the velocity of the body's centre of mass according to the desired centre of...
Design and Construction of a Soft Actuated Exoskeleton for Hand Rehabilitation of Stroke Patients
, M.Sc. Thesis Sharif University of Technology ; Ghafari, Ali (Supervisor) ; Meghdari, Ali (Supervisor)
Abstract
The main goal of this thesis is the design and development of a rehabilitation device for helping patients “to improve blood circulation” & retain and recover their abilities if possible that were lost during the stroke or a accident like that (my research in karaj/iran shows that it is possible by just movement of the specific body part). The focus is on hand in this thesis because Injuries to the hand are common and can be very debilitating since our hands are our primary means for interacting with our world. For rehabilitation in case of human hand there are several practices that should be done for patients either in home or in a rehabilitation center, time and money that is supposed to...
Silica chloride/wet SiO2 as a novel heterogeneous system for the deprotection of acetals under mild conditions [electronic resource]
, Article Phosphorus, Sulfur, and Silicon and the Related Elements ; Volume 178:2667-2670, Issue 12, 2003 ; Pourjavadi, Ali ; Zolfigol, Mohammad Ali ; Bamoniri, Abdolhamid
Abstract
A combination of silica chloride and wet SiO2 was used as an effective deacetalizating agent for the conversion of acetals to their corresponding carbonyl derivatives under mild and heterogeneous condition
Earthquake Branch
, M.Sc. Thesis Sharif University of Technology ; Bakhshi, Ali (Supervisor)
Abstract
In the past few decades, shaking tables are widely used to evaluate system response of structures under seismic excitations. These devices are used without any fundamental research performed on a shaking table system as an entity model. In most of these studies for simplicity, it is assumed that there exist no considerable vibration and displacement around the shaking tables, and no attention is paid to the peripheral substances such as soil settled under the foundation.
In this thesis, result of ambient vibration test on shaking table system (solid deck, concrete foundation and soil layer) has been presented. Precise sensors known as low frequency and high accuracy accelerometers have...
In this thesis, result of ambient vibration test on shaking table system (solid deck, concrete foundation and soil layer) has been presented. Precise sensors known as low frequency and high accuracy accelerometers have...
Comparison between Performance of Stone Columns and RAPs from the Bearing Capacity and Settlement Reduction Viewpoints
, M.Sc. Thesis Sharif University of Technology ; Pak, Ali (Supervisor)
Abstract
Out of several ground improvement techniques available, stone columns have been widely used. This technique has been successfully applied to increase the bearing capacity and to reduce the settlement for foundation of structures like liquid storage tanks, earthen embankments, raft foundations, etc., where a relatively large settlement is permissible. This technique has, generally, been proven successful in increasing the stiffness of weak soils, upgrading their safe bearing capacity, and reducing their total and differential settlements, as well as speeding up their consolidation process. The beneficial effects of stone column installation in weak deposits is manifested in the form of...
Improvement of Stability of Haptic Force Interaction with Virtual Environments Using a Haptic Interface with a Separate Tracker
, M.Sc. Thesis Sharif University of Technology ; Meghdari, Ali (Supervisor) ; Nahvi, Ali (Supervisor)
Abstract
In the present study, a new version of haptic devices is presented in which user’s hand is in contact with the device just while collision with virtual surface. In this system, the position of user’s finger can be traced by using a camera and the haptic device follows user’s finger at the distance of about two centimeters. While the haptic device approaches to the virtual surface, gradually reduces its speed and stops about two centimeters distant of virtual plane. Then user’s hand collides with the haptic device which is static. Greater fidelity, transparency, more stability and also no need to large actuators are of the advantages of this system. In this project, first we present a new...
Performance of Partially Filled Mini-Channels with Porous Media
, M.Sc. Thesis Sharif University of Technology ; Nouri, Ali (Supervisor) ; Moosavi, Ali (Co-Advisor)
Abstract
Laminar forced convection flow through a channel partially filled with a porous material was numerically studied in this thesis. The Navier-Stokes and Brinkman-Forchheimer equations were used to model the fluid flow in the free and porous regions, respectively. Coupling of the pressure and velocity fields was resolved using the SIMPLEC algorithm. The local thermal equilibrium was adopted in the energy equation. The effects of the thermal conductivity ratio, Darcy number, porosity, Reynolds number and height of the porous insert on velocity and temperature field were investigated. The results show that the flow behavior and its associated heat transfer are susceptible to the variation of the...
Selective synthesis of conjugated enynes from α-arylalkynols using LiCl-Acidic Al2O3 under solvent-free conditions [electronic resource]
, Article Journal of Chemical Research ; Volume 2002, Number 8, 1 August 2002, pp. 378-380(3) ; Bagheri Marandi, Gholam
Abstract
Free Content Selective synthesis of conjugated enynes from α-arylalkynols using LiCl-Acidic Al2O3 under solvent-free conditions
Selective preparation of fluorescent 1,8-naphthalimides using acidic alumina under microwave irradiation [electronic resource]
, Article Journal of Chemical Research ; 01/2001; 2001(11):485-487 ; Bagheri Marandi, Gholam
Abstract
7H-benzimidazo[2,1-a]benz[de]isoquinolin-7-one compounds were prepared in a selective manner by reaction between o-phenylenediamines and appropriate 1,8-naphthalenedicarboxylic anhydrides using acidic alumina under microwave irradiation
Simulation of the Biomolecule Imaging and Manipulation Via AFM by Molecular Dynamics Method
, M.Sc. Thesis Sharif University of Technology ; Meghdari, Ali (Supervisor) ; Moosavi, Ali (Supervisor)
Abstract
In this thesis we try to find optimized parameters for imaging and manipulation of a biosample with AFM. For this we have prepared a numerous Molecular Dynamics simulation and find some reliable result. So, first we have focused on imaging process in Non contact mode (the less harmful mode). Then we headed into the manipulation process. The main problem about manipulating a biosample is the environment. In imaging section, the process of imaging a biomolecule by AFM is modeled using molecular dynamics simulations. Since the large normal force exerted by the tip on the biosample in contact and tapping modes may damage the sample structure and produce irreversible deformation, the non-contact...
Characterzing Variation of Small Strain Shear Modulus of Unsaturated Sand During Hydraulic Hysteresis with Bender Elements
, M.Sc. Thesis Sharif University of Technology ; Pak, Ali (Supervisor) ; Khosravi, Ali (Supervisor)
Abstract
Results of previous studies on silt and clay indicated that variations in the small strain shear modulus, Gmax, during drying had a non-linear increasing trend with matric suction with greater values upon wetting. However, due to different material properties and inter-particle forces, different behaviour in Gmax is expected for sand. Although considerable research has been devoted in recent years to characterize the behaviour of Gmax of sand during drying, rather less attention has been paid to the effect of hydraulic hysteresis on Gmax and its variations during wetting. In the study presented herein, an effort was made to characterize the variation of Gmax for specimens of sand during...
Sequential Competitive Facility Location In Continuous Geometric Space
, M.Sc. Thesis Sharif University of Technology ; Abam, Mohammad Ali (Supervisor)
Abstract
Abstract The problem of competetive facility location can be defined as follows: There are a number of customers in the form of points in space, and two players arrange a number of facilities in the form of points in space, given some limitations, respectively. Each customer’s connection to each facility has a cost for the customer and an advantage for the facility, and each customer wants to be connected to at most one of the facilities which has the lowest cost for him. The goal is to find the strategy of placing the facilities and determining the cost which the facility receives from the customer, in such a way that the player’s profit is maximised.In this thesis, we first sought to...
Distributed Verifiable Computing: Algorithms and Analysis
, M.Sc. Thesis Sharif University of Technology ; Maddah Ali, Mohammad Ali (Supervisor)
Abstract
Zero knowledge proofs allow a person (prover) to convince another person (verifier) that he has performed a specific computation on a secret data correctly, and has obtained a true answer, without having to disclose the secret data. QAP (Quadratic Arithmetic Program) based zkSNARKs (zero knowledge Succinct Non-interactive Argument of Knowledge) are a type of zero knowledge proof. They have several properties that make them attractive in practice, e.g. verifier's work is very easy. So they are used in many areas such as Blockchain and cloud computing. But yet prover's work in QAP based zkSNARKs is heavy, therefore, it may not be possible for a prover with limited processing resource to run...
Cracked Rotors Modeling for Vibration Analysis and Control
, Ph.D. Dissertation Sharif University of Technology ; Behzad , Mehdi (Supervisor) ; Meghdari, Ali (Supervisor)
Abstract
The main aim of this thesis is to develop a mathematical model for vibration analysis of cracked rotors. This model should be a simple and precise model for prediction of the cracked rotor vibration behavior and suitable for vibration control. In order to create such model, the pure bending of a cracked beam is analyzed at first. This analysis is performed for two different orientations of the crack with respect to the beam and the bending vector. In this section a continuous bending model with continuous model for crack is developed which can predict the full deformation of the cracked beam in bending and can estimate the stress distribution in the beam with good approximation. Comparison...