Sharif Digital Repository

Hydroxyapatite is the most important bio ceramic, due to its structure and chemical composition which is similar to bone. Since feeble fracture toughness, brittleness and low tensile strength have restricted their use, for overcoming this problem, they were often used as a secondary component. HAp-Al2O3 nano-composite powder combined the benefits of biocompatibility of HAp and high strength of Al2O3. When HAp-Al2O3 nano-composite powders were sintered at a higher temperature than 1100- 1200°C, HAp was decomposed and converted to the second phase of TCP, due to the formation of calcium aluminate increasing decomposition speed of HAp to TCP at higher degree than 1100-1200°C temperatures;... 

Background: The early repolarization pattern (ERP) has been considered a normal variant in electrocardiography (ECG) for a long time. Nevertheless, increasing evidence has demonstrated its association with adverse outcomes. Objectives: The present study aimed to evaluate the prevalence of ERP in the Iranian general population and demonstrate its clinical and ECG correlates. Methods: A cross sectional study, comprising 1424 consecutive healthy adult individuals, was conducted at two university based hospitals in Tehran, Iran in 2012-2013. The ERP prevalence, clinical characteristics and ECG morphology were investigated in volunteers. Results: ERP was present in 136 out of 1,424 people (9.6%).... 

In this research, the effects of nano-sized MgO in Al2O 3-SiC composites were investigated. The overall changes in the density and mechanical properties of sintered samples (hardness, bending strength and toughness) were evaluated. After mixing, drying and uniaxial compaction of the powders, they were first heat-treated at low temperature in an electric furnace to remove any residuals. They were then heat-treated at high temperature (1700 °C) inside a graphite furnace in argon atmosphere for sintering (at normal and high pressure). The content of MgO in the Al 2O3-10 vol% SiC composite was 0, 500, 1000, and 1500 ppm. Thefracture toughness(KIC)of sintered composite with 10... 

In this paper, a novel decentralized adaptive control scheme for multiagent formation control is proposed based on an integration of artificial potential functions with robust control techniques. Fully actuated mobile agents with partially unknown models are considered, where an adaptive fuzzy logic system is used to approximate the unknown system dynamics. The robust performance criterion is used to attenuate the adaptive fuzzy approximation error and external disturbances to a prescribed level. The advantages of the proposed controller can be listed as robustness to input nonlinearity, external disturbances, and model uncertainties, and applicability on a large diversity of autonomous... 

Titania nanoparticles with high photocatalytic activity were prepared from titanium alkoxide dissolved in alcohol and water under acidic conditions. The effects of the key parameters including (alkoxide/water) ratio, (alkoxide/alcohol) ratio, precursor type, solvent type, type and concentration of stabilizer, calcination temperature, presence of methylcellulose (MC) and hydrothermal treatment were studied. The optimal conditions were obtained through an experimental design technique. This technique is also used to find the main factors influencing the degradation of methylene blue (MB) and mass percent of anatase phase. The powders characteristics were investigated by XRD and... 

A silicon carbide coating was formed on the surface of graphite flakes by reaction of molten Si with carbon at 1100-1300. °C in a 95%KCl-5%NaF molten salt under Ar atmosphere. The effect of temperature and Si/graphite ratio in the initial mixture on the quality and the amount of SiC were investigated by XRD and SEM/EDS analyses. Also, the water wettability, oxidation resistance and zeta potential of un-coated and coated graphite were examined by TGA analysis and sedimentation test. The results show the amount of coating to increase in the coated flakes with increasing temperature and Si/graphite ratio. The SiC coating improves water wettability of graphite and acts as a protective layer to... 

This work presents the catalytic graphitization process of phenolic resins (PR's) by addition of in situ nano-Fe particles as catalyst. Pyrolysis treatments of prepared compositions including various contents of nano-Fe particles were carried out at 600–1200 °C for 3 h under reducing atmosphere and graphitization process were evaluated by different techniques such as X-Ray diffraction (XRD), Field Emission Scanning Electron Microscopy (FESEM), High Resolution Transmission Electron Microscopy (HRTEM), Simultaneous Thermal Analysis (STA) and Raman spectroscopy that mainly performed to identify the phase and microstructural analysis, oxidation resistance and extend of graphitized carbon... 

In the present paper, phase and microstructural characterization of low carbon MgO-C refractories with addition of Fe-catalyzed phenolic resins as binder were investigated. Initially, phenolic resin was modified using various amounts of Fe particles as catalyst originated from iron nitrate ([Fe(NO3)3·9H2O]). The MgO-C matrix compositions were prepared by using 7% of modified phenolic resin, shaped and cured at 200 °C for 24 h. The cured samples were coked in the temperature range from 800 to 1400 °C and then characterized by XRD and FE-SEM techniques. Based on attained results, in-situ graphitic carbons, particularly in carbon nanotubes (CNTs) network were gradually formed from Fe-catalyzed... 

In the present paper, phase and microstructural characterization of low carbon MgO-C refractories with addition of Fe-catalyzed phenolic resins as binder were investigated. Initially, phenolic resin was modified using various amounts of Fe particles as catalyst originated from iron nitrate ([Fe(NO3)3·9H2O]). The MgO-C matrix compositions were prepared by using 7% of modified phenolic resin, shaped and cured at 200 °C for 24 h. The cured samples were coked in the temperature range from 800 to 1400 °C and then characterized by XRD and FE-SEM techniques. Based on attained results, in-situ graphitic carbons, particularly in carbon nanotubes (CNTs) network were gradually formed from Fe-catalyzed... 

In this study, we have investigated the bioleaching potential of a native strain of Acidithiobacillus ferrooxidans isolated from zinc and lead sulfide mines under varied ambient conditions of growth and substrate consumption. The effects of intermittent irrigation, type of agglomeration, feed formulation in terms of acid, enriched salt solution, initial number of microorganism, and their interactions on the bioleaching of low-grade zinc sulfide ores (containing 5.78% zinc) on growth and biooxidation efficiency of the bacteria have been evaluated. Bioleaching capacities of the isolate were optimized by the utilization the Taguchi method (e-qualitic-4) for design of experiments. As a result,... 

Conductive self -electrical stimuli bioactive scaffolds could be used the potential for peripheral nerve regeneration with the maximum efficiency. To produce such conductive self-electrical stimuli bioactive scaffolds, chopped spun piezoelectric nanofibers of polyvinylidene fluoride/mesoporous silica nanoparticle (PVDF/MCM41) are prepared and incorporated in gellan/polyaniline/graphene (gellan/PAG) nanocomposites which have been previously prepared by incorporation of polyaniline/graphene (PAG) nanoparticles in gellan gel at 80 °C. Highly conductive binary doped polyaniline/graphene nanoparticles are prepared by chemical oxidative polymerization of aniline monomer using in-suite... 

In this study, SnO 2-based varistors were prepared from mechanically activated nanocrystalline powders. Nanocrystalline powders were derived by subjecting the initial powders to intensive high-energy activation with different times and ball to powder ratio. The effect of activation parameters on the powder properties and sintering temperature, as well as microstructural, micro-electrical and macro-electrical properties of the final specimens was evaluated. Varistors derived from high-energy mechanical activation exhibit a higher density (98.3% relative density) and more refined microstructure upon sintering at 1,300 °C in comparison varistors prepared from conventional powders. Breakdown... 

Gel-fiber structure with the potential of extracellular matrix (ECM) mimics can be introduced as a suitable candidate for bioengineering applications. In this study, piezoelectric gellan gel-fiber was prepared with incorporating poly(vinylidenefluoride) (PVDF)/glass-flake in the gellan matrix. Glass-flake nanoparticles were modified with silane group, PVDF/glass-flake nanofibers were synthesized and short-strand nanofibers were fabricated using the mechanical homogenizer method. Brunauer–Emmett–Teller (BET), Fourier-transform infrared spectroscopy (FTIR), and Thermogravimetric analysis (TGA) analyses were used for surface modification study, and scanning electron microscopy (SEM),... 

Conductive self -electrical stimuli bioactive scaffolds could be used the potential for peripheral nerve regeneration with the maximum efficiency. To produce such conductive self-electrical stimuli bioactive scaffolds, chopped spun piezoelectric nanofibers of polyvinylidene fluoride/mesoporous silica nanoparticle (PVDF/MCM41) are prepared and incorporated in gellan/polyaniline/graphene (gellan/PAG) nanocomposites which have been previously prepared by incorporation of polyaniline/graphene (PAG) nanoparticles in gellan gel at 80 °C. Highly conductive binary doped polyaniline/graphene nanoparticles are prepared by chemical oxidative polymerization of aniline monomer using in-suite... 

Gel-fiber structure with the potential of extracellular matrix (ECM) mimics can be introduced as a suitable candidate for bioengineering applications. In this study, piezoelectric gellan gel-fiber was prepared with incorporating poly(vinylidenefluoride) (PVDF)/glass-flake in the gellan matrix. Glass-flake nanoparticles were modified with silane group, PVDF/glass-flake nanofibers were synthesized and short-strand nanofibers were fabricated using the mechanical homogenizer method. Brunauer–Emmett–Teller (BET), Fourier-transform infrared spectroscopy (FTIR), and Thermogravimetric analysis (TGA) analyses were used for surface modification study, and scanning electron microscopy (SEM),... 

In this research, we developed a cost-effective automated guided vehicle for small clothing production workshops that ordinary workers in such workplaces can operate. We acquired workers’ opinions in multiple workshops about using the robots (with some social capabilities) and working alongside them. We performed the tests in China and Iran to investigate and compare different preferences and priorities in two countries with different cultural backgrounds. We used the UTAUT questionnaire and conducted two-way ANOVA tests considering two independent factors: Nationality and Gender. The results showed that workers in Iran and China have relatively similar expectations from a social AGV, with... 

Soluble N-functionalized basic and cationic polysaccharides have been synthesized using polysaccharide phenyl carbonate as a precursor. The products and intermediates were thoroughly characterized by conventional methods. The quaternization of amino intermediates in various conditions was studied. Moreover, the potential of basic polymers as green and selective catalysts in Knoevenagel reaction was investigated. In all cases, only one isomer was obtained