Sharif Digital Repository

In present research work, methods of preparing ion exchange membranes, especially anion exchange membranes, were studied and chemical modification of polysulfone was chosen as a safe and economical method for preparing anion exchange membranes. The chloromethylated polysulfone was characterized by HNMR spectroscopy and functionalization degree was determined according to peak area integration. Membranes were produced by mixing and amination of the chloromethylated and normal polysulfone (40-100% wt). Morphology and chemical structure of membranes were investigated by SEM images and FTIR spectroscopy.The ionic conductivity, ion exchange capacity and water content of samples were measured. The... 

Butadiene is one of the most widely used materials in the Iran polymer industry. In order to use this material in the first step, the inhibitor must be separated. Consequently, at the start of the project, the separation of Tert butylcatechol inhibitors from butadiene was studied by the adsorption process on active alumina. The results of the condensed butadiene gas chromatography–mass spectrometry test indicate that, by using the active alumina as an adsorbent, the tert butylcatechol will be removed completely. In the next step, 1,3 butadiene, acrylonitrile, acrylic acid acid terpolymer, which one of its applications is manufacturing of artificial teeth, was synthesized by emulsion... 

Isopropanol purifying denotes dehydration of it to utilize in industries become important these days. Conventional process like distillation could not produce this product in high purity. Using membrane-based process, pervaporation, to dehydrate Isopropanol and other organic compound has been noticed in the last years. Among all type of membranes to dehydrate alcohols, poly (vinyl alcohol) is more effective due to its high hydrophilic characteristic. But it swallows in aqueous solutions and decrease its selectivity. To enhance structural and separation properties Chitosan, TiO2 and glurataldehyde added to polymeric membranes. Nine membranes have been made in this study that can be grouped in... 

Sodium Hydroxide production industry is among the largest chemical industries that annually produces 66 million tons worldwide. NaOH which is produced through electrochemical cells needs to be further enriched. The use of membrane technology as a substitute for conventional processes has been a point of interest. Thin film composite membrane is among favorable membrane because of its ability to be customized layer by layer individually. In this thesis, for the purpose of making an optimized membrane for NaOH enrichment, we studied the preparation conditions and witnessed that by increasing MPD from 1.5 %wt. to 4.5%wt. The flux experiences a minimum at 3.5%wt, which is the maximum for... 

In This thesis the properties of a compatible rubber compound for a specific chemical environment (acidic media) with high temperature and high pressure (HTHP) is studied. After primary studies, six formulations are designed on the basis of Nitrile rubber. after tensile and hardness tests at ambient temperature and 120 °C, samples putted in aging reservoir for aging tests. After that, tensile and hardness tests were performed again. Finally, by analyzing the results, the best formulation have chosen. Test results show that the NBR / PVC compound with higher filler load, has the best chemical resistance  

In this study, the pervaporation method was used for desulfurization of gasoline. Thiophene was used as a sulfur agent and n-heptane as a representative of hydrocarbon compounds in gasoline. The composite membranes of the active PDMS layer containing the UiO-66 metal-organic framework nanoparticles are based on porous membrane PVDF. The effect of adding PVP polymer on the porosity of the PVDF membrane has been investigated. Scanning electron microscopy (SEM), Fourier transform infrared spectrum (FTIR) and X-ray diffraction (XRD) have been used to characterize nanoparticles and synthesized membranes. The effect of adding nanoparticles on the membrane performance and its sowelling effect in... 

Clean water is a growing need for humanity all around the Earth. Due to the shortage of clean water resources in most parts of our planet, wastewater treatment and reuse has been of great value in past decades. Much research has been conducted to improve treatment systems. One of the most recent advancements in water and wastewater treatment field is application of membrane bioreactor systems. Despite many advantages of these systems, membrane fouling has been the main drawback since the creation and application of them. The main objective of this research is to investigate the probable fouling reduction and head loss in flat sheet UF membranes due to the application of an anaerobic... 

Membrane Technology is rapidly growing all over the world because of many applications. In all of this applications , use of adhesive ( between membranes and wall ) is necessary. selection of appropriate adhesive for membrane is very important in order to membrane has best performance and lifetime .Adhesives used in membrane technology must have good adhesion and suitable hardness . One of the newest adhesives used in membrane technology is two-component polyurethane adhesive. PU adhesives make strong and durable bond and have good flexibility which is an advantage for membrane technology.MDI isocyanate is used in most of commercial PU adhesives’ formulation. But in this study , modified MDI... 

composite membranes with PVC as the matrix, Alumina nanoparticles as filler and PVP as additives, were optimized and built. First, the interaction of PVC, PVP and alumina particles on the membrane structure and its performance was investigated by using Design expert software. The membranes which the software proposed were prepared and pure water permeability and flux decline tests were done according to evaluate the membranes performance in membrane bioreactor (MBR). And the results were imported in software and material effects on the performance of each membrane were analyzed. In order to better assess the efficiency and effectiveness of alumina nanoparticles on membrane, different values... 

There are different types of sensors for measuring the concentration of gases that usually have high prices because of their complicated method of production. We can produce much cheaper sensors in special conditions by using polymer membranes. Different gases can be separated by using appropriate polymer membranes and the difference between diffusion rate of these gases is the basis of the separation method and gases pass through the membrane with different flow rates in the specific entrance pressure. The flow rate of total gas which flows will be different for a binary gaseous mixture at specific temperature and pressure with different concentrations because the flow rate is relative to... 

The precise measurement of fluid flow in different fields of the industry is vitally important. In addition, due to enormous hydrocarbon reservoirs, Iran is the biggest owner of gas reservoirs in the world and exact measurement of fluids is of considerable importance to consumption or export. Ultrasonic flowmeters that are the most useful ones of them consist of three elements made of piezoelectric, impedance matching layer and backing material. In this study, on the contrary to former backing materials which usually use of titanium, tungsten, and aluminum oxide as a composite Filler, for the first time, tungsten oxide is used. In order to do this, composite samples were built of tungsten... 

In this study the main goal is preparing an appropriate UltraFiltration membrane from PolyVinyl Chloride for using as substrate in producing efficient Reverse Osmosis membranes to use in sea water desalination. each membrane should have some specifications to use it as reverse osmosis membrane’s substrate. One of the most important specifications is the appropriate pore sizes. To investigate this subject pure water flux and PolyEthylene glycol rejection of prepared membranes is tested. After investigation of this parameters and proving them, RO membranes are prepared using this membranes.
Salt rejection of Brackish water (2000ppm) and sea water (Persian gulf,32000ppm) are measured in... 

In this research, a novel nanofiltration membrane was used to separate nitrate from water as a nitrogen-containing compound. The membrane was fabricated by interfacial polymerization on the modified polysulfone substrate. To improve the efficiency of nitrate removal, several surface and bulk modifiers were used. As modified with LiCl and PVP polymer, the substrate matrix was modified to have the highest porosity to reduce the mass transfer resistance and the much surface area to form a polyamide layer on it. The polyamide layer was then synthesized by interfacial polymerization using a blend of MPD and PIP in different ratios (1: 1 optimum ratio) in reaction with TMC (optimum concentration... 

In this study, membrane distillation process was used for treatment of high salinity waters. The focus of this study is to simulate and build a setup of membrane distillation process. Since the membrane distillation process is based on the driving force of the temperature difference, the required temperature is provided by both the use of heaters and the use of solar energy. To increase the feed temperature by solar energy, a black polymer coating on the main membrane is used. The main membrane used in this process is PVDF polymer and the polymer coated on the surface is the PAN polymer. After simulating and constructing the laboratory setup, the influence of a variety of parameters on the... 

Membranes are one of the best water and wastewater treatment methods that could successfully replace other less-effective conventional techniques such as adsorption, coagulation, etc. Moreover, relative to other techniques, the quality of the water produced by membrane separation is very high compared to others. One of the main drawbacks of membrane treatment is fouling of the surface and internal pores of the membranes restricting its widespread application in the industry.In this study, TiO2@MIL-88A (Fe) photocatalyst and polyacrylonitrile membrane were modified with this photocatalyst to remove humic acid under visible light irradiation inside the PMR photocatalytic reactor was... 

Due to population growth, per capita change and heterogeneous distribution of water resources, forecasts demonstrate that more than 66% of the world's population will experience water scarcity by 2025. The major concern of desalination is their management of brine, with concentrations and their associated components more than twice the input concentration. Also, when extracting oil, per 1 oil barrel, about 7 to 10 barrels of high saline water are produced. One of the most common methods for disposing of brine is direct discharge into the environment, which, due to its destructive effects, creates serious threats to marine ecosystems. Therefore, it is necessary to desalting these high saline... 

In this research, an amperometric inhibition biosensor for the detection of cyanide has been fabricated by immobilization of the horseradish peroxidase (HRP) on the surface of glassy carbone electrode (GCE). Chitosan/acrylamide was applied for immobilization of HRP on the working electrode. All electrochemical measurement were carried out with three electrode: Ag/AgCl electrode as reference electrode, GCE as working electrode and platinium electrode as counter electrode which immersed in phosphate buffer solution. The amperometric measurement was done at an applied potential of -100 mV versus Ag/AgCl with a scan rate of 100 mV in the presence of hydroquinone as electron mediator and... 

Lately, some investigators of polymer engineering group are working to do continuous polymer solution casting process, rather than batch process for flat sheet membrane production. For this, they use a doctor blade system but, they faced some problems during coating process. From experimental observations of the studied system, some inappropriate vorticities were seen. That’s why the system forms a non-uniform film of the solution. Air bubbling occurs at system exit which is undesirable as well. In this study simulation and optimization has been done for forming thin film in doctor blade system. COMSOL Multiphysics 4.3b was used in purpose of simulating which works on numerical finite... 

Surface modification of thin-film composite (TFC) polyamide reverse osmosis membrane was carried out using CO2-laser irradiation and Dielectric barrier discharge (DBD) plasma to improve performance and antifouling properties of the prepared RO membranes. Firstly, TFC polyamide RO membranes were synthesized via interfacial polymerization of trimesoyl chloride (TMC) and m-phenylenediamine (MPD) monomers over porous polysulfone ultrafiltration support. Next, CO2-laser irradiation with 10,000-40,000 pulses and DBD plasma with 15, 30, 60 and 90 seconds duration were used for the surface modification. The surface properties were characterized by ATR-FTIR, SEM, AFM, and contact angle measurements.... 

Air filter paper is a combination of cellulosic, polymeric and resin materials with a certain permeability to air, which is used to prevent dust from entering the internal combustion process.The purpose of this research was to study and make air filter paper, based on which 4 samples of automobile air filter paper were produced. Samples with a combination of 2 types of cellulose fibers, imported short Kraft fibers and long Bangladeshi Kenaf fibers (skin) and one type of polymer fibers, Polyester fibers with a type of self-networking water-based Acrylic resin with glass conversion temperature (Tg) About 33 degrees Celsius and in the range of 20% by weight with a mass of about 120 g/m2 were...