Sharif Digital Repository

In the present work a new strategy for straightforward fabrication of CdS/CdTe solar cells, containing CdS nanowires and nanoparticles as a window layer and CdTe nanoparticles and microparticles as an absorber layer, are reported. CdS and CdTe nanostructures were synthesized by solvothermal method. X-ray diffraction analysis revealed that highly pure and crystallized CdS nanowires and nanoparticles with hexagonal structure and CdTe nanoparticles with cubic structure were obtained. Atomic force microscope and field emission scanning electron microscope images showed that CdS nanowires with length of several μm and average diameter of 35 nm, CdS nanoparticles with average particle size of 32... 

Dye-sensitized solar cells (DSCCs) in the form of mixed nanostructures containing TiO2 nanoparticles and nanowires with different weight ratios and phase compositions are reported. X-ray diffraction and field emission scanning electron microscopy analyses revealed that the synthesized TiO 2 nanoparticles had average crystallite size in the range 21-39 nm, whereas TiO2 nanowires showed diameter in the range 20-50 nm. The indirect optical band gap energy of TiO2 nanowires, anatase- and rutile-TiO2 nanoparticles was calculated to be 3.35, 3.28 and 3.17 eV, respectively. The power conversion efficiency of the solar cells changed with nanowire to nanoparticle weight ratio, reaching a maximum at a... 

A novel simple synthetic procedure for fabrication of high surface area nanostructured TiO2 electrode with uniform particles for photovoltaic application is reported. Modifying the TiO2 particulate sol by pH adjustment together with employment of a polymeric agent, so-called polymeric gel process, was developed. The polymeric gel process was used to deposit nanostructured thick electrode by dip coating incorporated in dye-sensitized solar cells (DSSCs). X-ray diffraction (XRD) analysis revealed that deposited film was composed of primary nanoparticles with average crystallite size in the range 21-39 nm. Field emission scanning electron microscope (FE-SEM) images showed that deposited film... 

Hydroxyapatite (HA) is the most substantial mineral constituent of a bone which has been extensively used in medicine as implantable materials, owing to its good biocompatibility, bioactivity high osteoconductive, and/or osteoinductive properties. Nevertheless, its mechanical property is not utmost appropriate for a bone substitution. Therefore, a composite consist of HA and a biodegradable polymer is usually prepared to generate an apt bone scaffold. In the present work polycaprolactone (PCL), a newly remarkable biocompatible and biodegradable polymer, was employed as a matrix and hydroxyapatite nanoparticles were used as a reinforcement element of the composite. HA/PCL nanocomposites were... 

Hydroxyapatite (HA) is the most substantial mineral constituent of a bone which displays splendid biocompatibility and bioactivity properties. Nevertheless, its mechanical property is not utmost appropriate for a bone substitution. Therefore, a composite consist of HA and a biodegradable polymer is usually prepared to generate an apt bone scaffold. In the present work polycaprolactone (PCL) was employed as a matrix and hydroxyapatite nanorods were used as a reinforcement element of the composite. HA/PCL nanocomposites were synthesized by a new in-situ sol-gel process using low cost chemicals. Chemical and physical characteristics of the nanocomposite were studied by X-ray diffraction (XRD),... 

Cadmium sulfide (CdS) with different morphologies was successfully prepared by solvothermal process by controlling the processing parameters, including nature of precursor and solvent, reaction temperature and process time. X-ray diffraction patterns revealed that, in all cases highly pure and crystallized CdS with hexagonal structure were obtained. In addition, it was found that the processing parameters influence on preferable growth direction of CdS nanostructures. Field emission scanning electron microscope analysis showed that CdS nanowires with different aspect ratios were obtained (depending upon the reaction temperature and process time) in presence of sulfur powder and... 

Different structures of TiO2 photoelectrodes are fabricated with various arrangement modes of the layers. TiO2 nanoparticles, synthesized by stabilizing agent free non-hydrolytic sol–gel method, are employed as the under layer, whereas carbon-doped TiO2 hollow spheres, prepared by hydrothermally grown carbon template, are used as the scattering layer of solar cells. The nanoparticles (22 nm) have anatase structure, while 300–700 nm hollow spheres show mixtures of anatase and rutile phases. X-ray photoelectron spectroscopy confirms that carbon is doped into TiO2 hollow spheres, resulting in a decrease in band gap energy in the range 2.96–3.13 eV compared with 3.04 eV band gap energy for the... 

Different structures of TiO2 photoelectrodes were fabricated with various arrangement modes of the layers. TiO2 nanoparticles were synthesized by a combination of sol–gel and solvothermal methods and were employed as the active layer of solar cells. Hierarchical TiO2 spheres (HTS) and spherical TiO2 particles (STP) were also prepared by hydrothermal and sol–gel processes, respectively, and used as the scattering layer of solar cells. Field emission scanning electron microscope and X-ray diffraction analyses revealed that all synthesized morphologies showed anatase structure with particle size around 20, 200–400 nm and 1.5–2.0 µm for the... 

Abstract: A novel simple synthetic procedure for improving cell efficiency and reducing the production cost of TiO2 dye-sensitized solar cells (DSSCs) by modification and optimization of homemade formulated paste is reported. This is achieved in terms of morphological manipulation of deposited monolayer TiO2 films by controlling three processing parameters of paste formulation. These parameters are tailored to obtain a paste with proper viscosity suitable for spin-coating technique and to achieve uniform, homogeneous, and crack-free films with good connections between TiO2 grains and porous structure. Photovoltaic measurements show that TiO2... 

We present a new dandelion-like TiO2 spheres by a modified hydrothermal method for manufacture of dye-sensitized solar cells (DSSCs). This construct is composed of numerous nanowires for employment as the scattering layer of DSSCs. Such morphology is produced by nucleation-growth-assembly mechanism. The size of the dandelion-like spheres and their morphology can be tailored by controlling the processing parameters of the modified hydrothermal process. TiO2 nanoparticles with narrow size distribution are also synthesized by hydrothermal route for the active layer of DSSCs. The nanoparticles show pure anatase phase with average size of 40 nm, whereas the dandelion-like TiO2 spheres are pure... 

The plasmonic effects of infiltrated silver (Ag) nanoparticles, with different contents, inside a nanostructured TiO2 film on the photovoltaic performance of dye-sensitized solar cells (DSSCs) are explored. The synthesized Ag nanoparticles are immobilized onto deposited TiO2 nanoparticles by a new strategy using 3-mercaptopropionic acid (MPA), a bifunctional linker molecule. Transmission electron microscope (TEM) images show that monodispersed Ag and polydispersed TiO2 nanoparticles have an average diameter of 12 ± 3 nm and 5 ± 1 nm, respectively. Moreover, Fourier transform infrared spectroscopy (FTIR) analysis reveals that Ag nanoparticles were successfully functionalized and capped with... 

Different compositions of TiO2–BaTiO3 nanocomposites are synthesized with various weight ratios for dye-sensitized solar cell (DSSC) applications. TiO2 and BaTiO3 nanoparticles (NPs) are synthesized by sol-gel and solvothermal methods, respectively and are employed as the photoanode electrodes. BaTiO3 NPs have pure cubic perovskite crystal structure with an average size of 20-40 nm, while TiO2 NPs show pure anatase phase with 15-30 nm size. The power conversion efficiency (PCE) enhancement of the cells is first attained by controlling the thickness of the films for light harvesting improvement. The fabricated DSSC composed of pure BaTiO3 NPs with an optimal thickness of 25 μm shows... 

We develop a facile route for deposition of mesoporous TiO2 thick films over several micrometers by sol–gel and evaporation-induced self-assembly processes using Pluronic F127. The light harvesting of deposited films by two different methods (i.e., using a viscous gel and a paste) is studied by controlling their mesoscopic characteristics, phase composition and thickness for dye-sensitized solar cells applications. It is revealed that the mesoscopic films have mixtures of anatase and rutile crystal structures with surface area in the range 50.6–94.6 m2/g. We observe that the mesoporous TiO2 films prepared under optimized conditions improve light harvesting and dye loading of photoelectrodes.... 

In this work the influence of different particulate gels on morphology and photoelectric performance of TiO2 dye-sensitized solar cells (DSCs) is studied. Two coagulant and flocculant agents are used to convert a TiO2 particulate sol into the gels using double layer compression and charge neutralization mechanisms. One more TiO2 particulate gel is also prepared by changing the pH of the sol using acid: alkoxide molar ratio higher than the critical ratio to obtain an unstable sol. Based on X-ray diffraction (XRD) analysis, the films contain primary nanoparticles with average crystallite size of 13–15 nm. Field emission scanning electron microscopy (FE-SEM) images show uniform, nanostructured... 

Herein, we report the impact of chromium doping on the physical properties, electronic band structure and photovoltaic characteristics of their corresponding devices based on dye-sensitized solar cells (DSCs). Different DSCs with various compositions of the photoanode electrodes are fabricated to study their optical, structural, conduction band edge, donor density, depth of trap states and photoelectrochemical properties using X-ray diffraction (XRD), diffuse reflectance spectroscopy (DRS), field-emission scanning electron microscopy (FE-SEM), Mott-Schottky capacitance analysis, chemical capacitance and electrochemical impedance spectroscopy (EIS) measurements. For such studies, the Cr-doped... 

Herein, we report the impact of light scattering mechanism on photovoltaic and photoelectrochemical performance of dye-sensitized solar cell (DSC) devices composed of TiO2 nanoparticles and hollow cubes. DSCs are designed by two different light scattering modes (i.e., mode I in form of single layer electrode containing nanoparticles and hollow cubes and mode II in the form of double layer electrode comprising active and scattering layers made of nanoparticles and mixtures of nanoparticles and hollow cubes, respectively). The synthesized anatase-TiO2 hollow cubes (200–400 nm) and nanoparticles (15–30 nm) are employed to enhance the optical length and light harvesting of photoanodes,... 

Herein, enhancement of dye-sensitized solar cell (DSC) performance is reported by combining the merits of the dye loading of TiO2 nanoparticles and light scattering, straight carrier transport path, and efficient electron collection efficiency of TiO2 cubes. We fabricate DSC devices with various arrangement styles and compositions of the electrodes in the forms of monolayer and double layer films. For this purpose, the solvothermal synthesized TiO2 cubic particles (100-600 nm) are employed as the scattering layer, whereas TiO2 nanoparticles (15-30 nm) synthesized via a combination of solvothermal and sol-gel routes are used as the active layer of devices. We improve the photovoltaic... 

A new strategy for enhancing the efficiency of TiO2 dye-sensitized solar cells (DSSCs) by design of a new double-layer film doped with Zn ions, with various morphologies and phase compositions, is reported. X-ray photoelectron spectroscopy (XPS) revealed that Zn2+ (in the range 0.25-0.1 at.%) was successfully incorporated into the TiO2 lattice without forming secondary phases. X-ray diffraction (XRD) and field emission scanning electron microscope (FE-SEM) analyses showed that the synthesized nanoparticles had nanometer grains with different phase compositions and average crystallite sizes in the range of 8-48 nm, depending upon Zn atomic percentage. UV-vis absorption verified that Zn... 

Nanostructured TiO2-SnO2 thin films and powders were prepared by a facile aqueous particulate sol-gel route. The prepared sols showed a narrow particle size distribution with hydrodynamic diameter in the range 17.2-19.3 nm. Moreover, the sols were stable over 5 months, since the constant zeta potential was measured during this period. The effect of Sn:Ti molar ratio was studied on the crystallisation behaviour of the products. X-ray diffraction analysis revealed that the powders were crystallised at the low temperature of 400 °C containing anatase-TiO2, rutile-TiO2 and cassiterite-SnO2 phases, depending on annealing temperature and Sn:Ti molar ratio. Furthermore, it was found that SnO2... 

The light-scattering effect in the dye-sensitized solar cells (DSCs) was studied by controlling TiO2 phase composition and morphology by fabrication of double-layer cells with different arrangement modes. The starting material for preparation of TiO2 cells was synthesized by an aqueous sol-gel process. X-ray diffraction and field emission scanning electron microscopic analyses revealed that TiO2 nanoparticles had particle size ranging between 18 and 44 nm. The optical property and band gap energy of TiO2 nanoparticles were studied through UV-Vis absorption. The indirect optical band gap energy of anatase and rutile nanoparticles was found to be 3.47 and 3.41 eV, respectively. The...