Sharif Digital Repository

One of the major issues raised in the numerical models is the effects of various input parameters on the model output. Identifying the most important parameters in the output is very important in petroleum engineering, especially in tuning equation of states and history matching. Screening the most important parameters from unimportant parameters is assessable by sensitivity analysis.In this study local and global sensitivity analysis methods are used to identify the most important parameters in tuning EOS for seven different fluid samples. Global sensitivity analysis methods are more successful in correct ranking of tuning parameters. Morris method as a global method can screen the... 

Aphron drilling fluids or CGA fluids are the wellknown updated drilling fluids in recent years.this kind of drilling fluids can control the mud loss into the formation and thus reduce formation damage and drilling costs. its structure consists of two phase fluid (gas and liquid) that the aphrons are the micro bubbles with 10 to 100 micrometer diameter that have strong stability in liquid phase compared to foamy drilling fluids. Generally aphron drilling fluids are made of base drilling fluid and surfactants, for more stability, mixed surfactant-polymer additive is so beneficial. in the last two decades, the Lattice-Boltazmann method is introduced for computational fluid dynamic area and... 

One of the three fundamental methods in reservoir evaluation is coring, other two methods are logging and well test. Coring is an operation during which, samples from formation rock are taken, and used for laboratory tests and examinations. Although coring presents exact information from reservoir rock, its small scale is the reason of some laboratory errors. This operation is fulfilled with special bits. Coring importance shines where it could give us an idea of reservoir conditions; however cannot be develop it, to all of the reservoir. Coring is used to identify rock properties like porosity, permeability, wettability and fluid properties like fluid density or fluid saturation. Rock... 

Drilling operation is one of the most important parts of oil production procedure. Therefore, drilling optimization has an effective role in ultimate benefits and total cost reduction. Also formation damage can affect reservoir performance. In this study, a combination of optimization methods for each part of drilling operation has been used and fitness function of total cost is presented. This function includes number of bit runs, bit selection, controllable parameters and drilling mud properties. For prediction of formation damage radius and variable risk analysis, two new methods are proposed and have been used as fitness functions. Finally, by suggesting a multi objective optimization... 

Transport of drilling cuttings at the bottom of the well has always been one of the common problems of oil and gas drilling, which causes stock pipe or reduce the penetration rate and other problem. For this reason, the design of drilling fluid is one of the important drilling problems to be considered in order to optimally transfer drilling cuttings to surface. So far, many papers have been devoted to optimizing the drilling fluid for the transport of cuttings, but these papers focus on the state of drilling fluid static and less to model the dynamics and to examine the interaction between the cuttings and drilling fluid. At this end this study will modeling the drilling fluid flow using... 

One of the most important issues in modeling and simulation of reservoirs is determination of different rock types or Rock Typing. In this study, after a brief review of some conventional methods for rock typing, their capabilities have been investigated. In this way, for the first time, pore network modeling is used as a tool for validating the rock typing methods. By using flow simulation in porous medium with pore network modeling approach, similar rock types data have been generated and these artificially data have been used for validating of rock typing methods. To form more realistic pore networks, both regular and irregular pore network have been modeled and analyzed. Pore size... 

Alavand Oil field is located 50 Km away from west of Siri Island and includes DPG and DPH platforms. The production from Alavand field started in 1998 and till now 11 wells have been totally drilled .Since a production peak in 2001, the oil production in Alvand field has decreased. Water cut is increasing and reservoir pressure is decreasing gradually. Considering poor reservoir characteristic of this reservoir, productivity indexes of wells are relatively low. In addition; natural depletion of reservoir caused the wells to be unable to flow naturally and either closed or produce periodically consequently. To increase production and extend the lifetime of Alvand field, it is decided to start... 

Matrix acidizing aims at bypassing near wellbore damages in typical carbonate reservoirs or enhancing permeability and hydraulic conductivity in naturally fracture ones. The simulation of acidizing process at pore scale and complex geometries by LBM will lead to gain more knowledge about molecular mechanisms that govern rock dissolution, diffusion and advection of reactive fluid and help the evaluation of acidizing efficiency.In this thesis, simulation of acidizing includes the following steps:
• Multicomponent fluid convection
• Fluid diffusion into the solid
• Fluid-rock reaction
• Boundary conditions including periodic, bounceback, non-equilibrium bounceback, Dirichlet,... 

Nowadays, one of the most challenges in drilling and production engineering, is the formation damage caused by fluid filtration while drilling and completion operations. This damage would cause serious problems in pay zone and besides influencing the well performance during its life time – due to permeability reduction in near wellbore area- and cause economic expenses such as workover and stimulation operation. Therefore, considering the aspects of formation damage minimization during drilling and completion operations, the fluid selection for these purposes would be crucial. It requires the knowledge of interactions between these fluids and the reservoir rock. In this thesis, using the... 

Wax deposition is one of the main problems in the oil industry. The formation of wax deposition causes problems such as reducing the effective tube radius, increasing pressure, reducing the flow capacity and etc. Even crude oil waxes can block the pipeline due to deposition of wax during crude oil production and transportation operations. If wax deposition is well predicted and effective parameters are well known and studied, they can be useful in reducing the deposition of wax, and consequently its problems and wax deposition costs will be significantly reduced. In this research, wax deposition has been investigated in Underbalanced drilling by OLGA software. In the first part, by... 

Because of the importance of simulations in the oil industry, there are different software applications designed for this purpose. The purpose of the simulation in the oil industry is to reduce operational errors during the operation and to achieve the most ideal mode of operation. However, in the simulation of multiphase fluid flow because of the special circumstance, simulation plays an important role in the oil industry. OLGA multiphase flow simulation software is a strong simulation software for water, oil, Gas wells, wellhead facilities, refineries and pipelines and it is capable of simulating pipelines under various dynamic conditions. Simulation of drilling hydraulic parameters is... 

The technique of geosteering has been widely adopted within the petroleum industry for proper wellbore positioning through involving predicting the geology ahead of the bit, furthermore, the advantages of this technique became more pronounced as drilling environments became more complex. the fundamental concept of geosteering is to put and maintain the well within the target zone(s), so as to promote safe and economical production of the well. Geosteering-related technologies, like downhole information-gathering tools and real time data transmission and data analysis applications, are continuously and significantly improved to support geosteering decisions.This study demonstrates how the use... 

Rapid gas kick detection is an essential tool in safe well control operation. Gas kick can be defined as the uncontrolled release of gas from the formation into the wellbore due to insufficient hydrostatic pressure of the drilling mud. Delay in gas kick detection makes it challenging to control the well properly and may lead to blowout when gas reaches the surface, causing irreparable damage to life, property, and the environment. The usual method of identifying this phenomenon is through surface parameters such as increasing the return flow rate of drilling mud at the surface or increasing pit gain. The use of oil-based mud makes it more challenging to detect. Because, unlike water-based... 

In this study, for investigation of water salinity effect on asphaltene modeling, PC-SAFT equation of state has been used. All steps of modeling have been done by C sharp programming language software. Nghiem model has been used for modeling of asphalting pure solid. In this model, the heaviest component is split into two precipitating and nonprecipitation parts that their physical properties are the same in each part. Furthermore, to determine the exact mechanism of asphaltene precipitation, an oil model (Asphaltene+heptan+tuloene) in the presence of different water brine such as synthetic brine (with MgCl2, CaCl2, and Na2SO4 salts), seawater) ten and two times diluted), and formation water... 

During the drilling of oil and gas wells, the probability of a kick resulting in blow out is high. In the event of a kick, well should be controlled immediately and prevented blowing out. Common methods include: driller method, wait and weight method and concurrent method. In this project, simulation of well control process is done for common well control methods, for water based muds and oil based muds. Movement of different fluids, their combination and removal of fluid from the well are simulated and the results are listed. The flash calculations are done for oil based mud and dissolution of kick fluid in the oil based mud is considered. After simulating and calculating necessary... 

Underbalanced drilling is a type of drilling operation in which the pressure of the drilling fluid is less than the pressure of the formation. This pressure difference has created advantages for this method. Less formation damage, reduction of pipe stuck, increasing rate of penetration and production during drilling are the advantages of this method compared to traditional methods. To reduce the pressure of the drilling fluid, very low density fluids should be used. One way to reduce density is to mix a compressible fluid such as gas into water. Due to the difference in density and surface tensile strength of water and gas, these two phases do not combine, so a stable combination of these... 

The main responsibility of a primary cement job is to provide hydraulic isolation between various zones. Cement-sheath evaluation is concerned with the question of whether zonal isolation exists. Cement Evaluation Logs are used to evaluate the quality of cement sheath behind the casing or liner after cement job. these logs are a part of well integrity logs. Cement Evaluation Log results are complex and can be misunderstood, and it can lead to bad decisions that could have severe consequences. Cement evaluation logs must therefore be interpreted by experienced professionals. To help these interpreters, we propose a system for automatically interpreting cement evaluation logs, which they can... 

Today, with the reduction of world oil prices and the development of competing energy sources, fossil fuels such as nuclear energy, electricity, wind, etc., in order to increase the economic efficiency of oil sales, we must Reduce production costs to a minimum. If the components of oil extraction costs are examined, the cost of drilling production wells is one of the main economic components that affect the cost of producing oil. Therefore, according to the above explanations, the cost of drilling wells should be reduced.To reduce the cost of drilling a well to be drilled, it is better to predict the drilling parameters (for example ROP) before starting the drilling process. For this... 

With the production from the reservoirs, the amount of in-situ oil storage has decreased and there is a need to increase oil recovery (EOR) from the reservoir. Increased oil recovery (EOR) includes operations such as acidizing and hydraulic fracturing. Considering the economic and high operational costs and geomechanical complexities, as well as the technical progress of hydraulic fracturing and its future; It is necessary to manage hydraulic fracturing operations optimally. This research is about hydraulic fracturing and its main goal is to optimize the parameters of the fracture or the geometry of the fracture. The research study was carried out on the Bangistan Reservoir located in the... 

Nowadays, one of the major challenges in the oil and gas industry is sand production, which creates many problems and can complicate the oil and gas production process, so modeling sand production and using models to estimate the start of sand production and also the amount of sand produced can help a lot in the proper management of the reservoir.In this study, first, how to obtain the critical wellbore pressure using the Mohr-coulomb failure criteria and also the Mogi-coulomb failure criteria in different cases, it is explained, that knowing the critical wellbore pressure can be helpful in estimating the start of sand production. Then, how to build a one-dimensional geomechanical model of...