Sharif Digital Repository

Due to safety critical applications of the embedded systems, reliability is one of the most important properties of these systems. Wireless networks also have error prone data transmission channels and limited power consumption. Therefore reliability and power conservation are two vital characteristics of the wireless network especially in embedded applications. Since achieving to a desirable level of data reliability is power consuming, we must consider a trade-off between power consumption and data reliability. In wireless networks power consumption can be categorized into: power consumption in wireless devices and power consumption in data transmission. For decrement of wireless devices... 

In recent years, there has been a trend toward outsourcing data to the cloud provider. These companies must tackle the data security challenges. Generally these parties are assumed to be honest but curious. In past years, the research communities have been investigating different solution to ensure confidentiality.
In addition to data confidentiality access and pattern confidentiality is a high-priority issue in some cases so. potential adversary should be unable to drive information from the observed access pattern to the outsourced data. Despite the fact that there are more investigation in the field of data confidentiality, concern over data security are the rise in outsourcing data,... 

Air enterance in to flowing water is something that is commonly seen in the water conveyance systems. The mixture of Air and water that flow together create a kind of flow that is called two phase flow. This kind of flow is often seen in culverts and water conveyance systems. There are different flow patterns in two phase flow. Considering pressure fluctuation, pressure drop and pressure recovery, slug flow pattern is the most complicated pattern among all.
Sometimes a singularity is used in a tunnel; one of the singularities that are frequently used in water conveyance system is expansion transition. In this study an experimental setup is used to model two phase slug flow, which passes... 

Star Formation History (SFH) is one of the important quantities to constrain galaxy formation and evolution scenarios and star formation models. In this thesis we aim to derive SFH for solar neighbourhood stars. We can use absolute magnitude-color diagram of a stellar system to derive the SFH. The method is to consider different functions for SFH and compare the resulting colormagnitude diagram with observational data. We used HIPPARCOS satellite data in this thesis. Hipparcos has measured astrometric parameters for about 120000 stars very accurately, which enables us to compare the color-magnitude of those stars with theoretical color-magnitudes. In this thesis, using Monte Carlo method, we... 

The austenitic heat resistant stainless steels have been widely used in petrochemical industry as furnace tubes which are exposed to extremely high temperatures. In this study, the quench aging process of a HP modified heat resistant stainless steel is assessed and the kinetics of aging is evaluated by the JMAK model. The microstructure of steel in as cast and aged conditions was characterized by optical microscope and scanning electron microscope equipped with EDS. The effects of aging time and temperature on the microstructure, tensile propertices, shear strength, hardness, and ductility of the aged steel were determinded. The results of tensile and shear punch tests show a linear... 

In recent years there has been a huge amount of attention in the application of the base isolation system as a passive procedure to limit seismic response of structures. A number of international codes including UBC97, ASCE07-2005, and ASCE-2010 have devoted a special part for the Seismic analysis and design of base-isolated structures. The present work investigates the vertical distribution of the lateral seismic force, for base-isolated structures suggested by the ASCE07_05 code under near field earthquakes. Near field earthquakes have attracted so much interest among the researchers and engineers due to their disastrous effects on structures. According to the recorded data, it is... 

Because of the high operating temperature, interconnect surface tends to be oxidized and Cr2O3 oxide layer will be created on the surface. This phenomenon is undesirable due to decreasing electrical conductivity, so a preservative coating is needed to improve the interconnect properties. In this paper, a dense spinel thin film was successfully synthesized on a ferritic stainless steel (type 430) substrate by a sol-gel dip coating method. This coating improved chemical stability, oxidation behavior of the substrate and decreased cathode poisoning. The Nickel-Cobalt spinel was coated on the substrate by sol-gel coating process. First, during a hydrolyze process, a stable sol was made up from... 

Precipitation is the most important term in the world water balance and irrigation is the major consumer of fresh water resources. However, most of the precipitation products are unable to accurately estimate the amount of water that is reaching the ground. Moreover limited information are available in terms of irrigated area and irrigation water use (IWU) at the global scale. On the other hand the confounding effect of the climate change and the world population growth has accelerated the decline in the world fresh water resources. Thereby, the precise estimates of these two parameters (i.e. Precipitation and irrigation) is essential for food and water security. In this study the soil water... 

The aim of this study is to provide an algorithm for estimating the Soil Moisture Content (SMC) using Sentinel satellite images for the Varamin and Karaj provinces. Soil moisture varies greatly due to various factors such as land surface changes (roughness, soil type, and vegetation cover), topography and weather conditions. Due to the high cost of traditional methods of measuring soil moisture and also the large spatial changes of soil moisture, the use of these methods to prepare high-precision maps and for long periods of time or in a global scale is not possible. This study examines the relationship between soil spectral reflection diagrams using optical images in the range of 400 to... 

Nowadays, intracellular studies have been widely developed in biological applications. Intracellular analysis requires direct experiments on cells such as cell separation, purification, lysis and DNA extraction. The process of cell lysis and the resulting DNA purification is a crucial step in diagnostic processes. Since, the basis of many genetic studies is the information existed in double-stranded DNA structures.In this project, a microfluidic system is presented which performs integrated chemical cell lysis and DNA extraction. The cell used in this study is L-929. In order to increase cell lysis, the serpentine micromixer in combination with internal and external barriers at the beginning... 

Solid foams are novel materials with outstanding characteristics that have found numerous applications in the construction of light, stiff structures during the past two decades. At the micro-level, solid foams benefit from a cellular structure, which is composed of either closed or open cells. Open-cell foams, which were the concern of this study, are described as a network of inter-connected struts (or ligaments) with beam-like action. The mechanical design of foams requires their mechanical properties to meet certain criteria. These criteria can be satisfied by careful selection of the base material and the microstructural morphology (geometry). However, the selected material has to be... 

Hydroxyurea is an anticancer drug that is commonly used to treat chronic myeloid leukemia (white blood cell cancer in bone marrow), polycythemia vera (red blood cell cancer), sickle cell anemia, solid tumors, and in particular leukemia. In this research, in addition to analyzing all available methods for synthesis of hydroxyurea, the most economical method for synthesis of hydroxyurea which is Hantzsch method was chosen; then we synthesized hydroxyurea crystals using a precipitation or crystallization process. To do so, two hydroxylamine hydrochloride and potassium cyanate reactants have been used in the semi batch reactor. Since the reaction efficiency and purity of the synthesized...