Sharif Digital Repository

In this work an improved mean potential energy function for the interaction of an isolated pair of methane is obtained, from which the non-equilibrium properties of methane at zero pressure limit are calculated, accurately. The potential energy function of 21 different fixed orientations of (CH4)2 dimer has been obtained via the coupled cluster method. In order to obtain a mean potential energy function, the Boltzmann-average of the obtained potentials of the selected fixed orientations has been used. Unlike the full potential energy surface with the angle-dependent, the parameters of the mean potential are found to be temperature-dependent. The mean potential energy function is fitted well... 

The potential energy function of sulphur hexafluoride has been determined via the inversion of reduced viscosity collision integrals at zero pressure and fitted to obtain an analytical potential form. A comparison of the potential with the previously determined potential has been included. The interaction potential energy from the inversion procedure reproduces, within experimental error, viscosity, self-diffusion coefficient, thermal conductivity and isotopic thermal diffusion factor of sulphur hexafluoride over a wide temperature range. These properties have also been fitted to very accurate equations  

A facile sonochemical method has been developed to prepare very small zinc sulfide nanoparticles (ZnS NPs) of extremely small size about 1. nm in diameter using a set of ionic liquids based on the bis (trifluoromethylsulfonyl) imide anion and different cations of 1-alkyl-3-methyl-imidazolium. The structural features and optical properties of the NPs were determined in depth with X-ray powder diffraction (XRD), transmission electron microscopy (TEM), high-resolution TEM (HRTEM), Fourier transform infrared (FTIR) spectroscopy, dynamic light scattering (DLS) analysis, and UV-vis absorption spectroscopy. The energy band gap measurements of ZnS NPs were calculated by UV-vis absorption... 

A new pair-potential energy function of nitrogen has been determined via the inversion of reduced viscosity collision integrals and fitted to obtain an analytical potential form. The pair-potential reproduces the second virial coefficient, viscosity, thermal conductivity, self-diffusion coefficient, and thermal diffusion factor of nitrogen in a good accordance with experimental data over wide ranges of temperatures and densities. We have also performed the molecular dynamics simulation to obtain pressure, internal energy, heat capacity at constant volume, and self-diffusion coefficient of nitrogen at different temperatures and densities using our calculated pair-potential and some other... 

A circuit model has been proposed for two-dimensional metallic arrays of metallic square holes located on a homogeneous substrate. Although the proposed circuit model holds true, the surface admittance between the metallic hole array and the cover was erroneously calculated since the presence of the cross-polarization terms had been neglected. Furthermore, there have been mistakes in numerical simulation and in analytical calculations based on the presented formulas. The correct formulation is now given, and erroneous figures are replotted  

Impure rhenium and molybdenum bearing solution was passed through a column of Varian strong base anionic resin for selective adsorption of rhenium and molybdenum ions from the solution. Elution of molybdenum and rhenium was carried out using 2 N NaOH and 0.2 N NH4SCN, respectively. The effect of resin bed height on breakthrough time was investigated. Experimental and theoretical curves were compared with good agreement. The results showed that the behavior pattern of these curves was repeatable and almost constant. © 2006 Elsevier B.V. All rights reserved  

In the present study, the main purpose is investigation of the coatings thickness effect on the fatigue life of AISI 1045 steel. Herein, two different coatings of warm galvanization and hardened chromium have been used on the specimens. Fatigue tests were performed on specimens with different coating thicknesses of 13 and 19 µm. In the high-cycle level, S–N curves are extracted with 13 points for each sample. The results show that the galvanized coating is the most appropriate coating with low thickness, but with significant increasing of coating thickness, the best choice is hardened chromium coating. However, artificial neural network (ANN) has been used as an efficient approach instead of... 

In 1974 Dijkstra introduced the seminal concept of self-stabilization that turned out to be one of the main approaches to fault-tolerant computing. We show here how his three solutions can be formalized and reasoned about using the concepts of game theory. We also determine the precise number of steps needed to reach self-stabilization in his first solution. © Springer International Publishing AG, part of Springer Nature 2018  

Effects of pH, D2EHPA, Cyanex® 272 and Cyanex® 302 on extraction of zinc, manganese and cobalt from a Zn-Mn-Co-Cd-Ni containing solution at the room temperature was comprehensively investigated. Addition of Cyanex® 302 indicated a left-shifting-effect on the extraction curve of zinc, a right-shifting-effect on the extraction curve of manganese and no effect on the extraction of cobalt. Addition of Cyanex® 272 shifted all three curves to the right. Therefore, the most suitable extractant for separation of zinc from manganese was therefore 0.3-0.3 mixture of D2EHPA and Cyanex® 302, and that for separation of manganese from cobalt was pure D2EHPA. The stoichiometric coefficient for the... 

The adverse effect of graphene-titanium oxide composite films (containing sheet-like surface morphology) on Caenorhabditis elegans nematodes (as a model for minuscule animals) was investigated in a solar light-induced photocatalytic process. X-ray photoelectron spectroscopy demonstrated photocatalytic reduction of the chemically exfoliated graphene oxide sheets included in the TiO 2 film. Furthermore, formation of TiC and Ti-O-C bonds in the composite film (obtained through annealing at 450 °C in air) resulted in a substantial delay in the recombination rate of the photoexcited electron-hole pairs and more efficient photocatalytic processes. The composite film showed a type of... 

Content-based image retrieval (CBIR) has turned into an important and active potential research field with the advance of multimedia and imaging technology. It makes use of image features, such as color, texture and shape, to index images with minimal human intervention. A CBIR system can be used to locate medical images in large databases. In this paper we propose a CBIR system which describes the methodology for retrieving digital human brain magnetic resonance images (MRI) based on textural features and the Adaptive neuro-fuzzy inference system (ANFIS) learning to retrieve similar images from database in two categories: normal and tumoral. A fuzzy classifier has been used, because of the... 

Content-based image retrieval (CBIR) makes use of image features, such as color, texture or shape, to index images with minimal human intervention. Content-based image retrieval can be used to locate medical images in large databases. In this paper, the fundamentals of the key components of content-based image retrieval systems are introduced first to give an overview of this area. Then, a case study which describes the methodology of a CBIR system for retrieving human brain magnetic resonance images, is presented. The proposed method is based on Adaptive Neuro-fuzzy Inference System (ANFIS) learning and could classify an image as normal and tumoral. This research uses the knowledge of CBIR... 

Content-based image retrieval (CBIR) makes use of low-level image features, such as color, texture and shape, to index images with minimal human interaction. Considering the gap between low-level image features and the high-level semantic concepts in the CBIR, we proposed an image retrieval system for brain magnetic resonance images based on saliency map. The saliency map of an image contains important image regions which are visually more conspicuous by virtue of their contrast with respect to surrounding regions. First, the proposed approach exploits the ant colony optimization (ACO) technique to measure the image's saliency through ants' movements on the image. The textural features are... 

Content-based image retrieval (CBIR) has been one of the most active areas of research. The retrieval principle of CBIR systems is based on visual features such as colour, texture and shape or the semantic meaning of the images. A CBIR system can be used to locate medical images in large databases. This paper presents a CBIR system for retrieving digital human brain magnetic resonance images (MRI) based on textural features and the support vector machine (SVM) learning method. This system can retrieve similar images from the database in two groups: normal and tumoural. This research uses the knowledge of the CBIR approach to the application of medical decision support and discrimination... 

This paper presents the results of an analytical study on the dynamic characteristics of the Shaking Table facilities at Sharif University. This 3 degree of freedom shaking table is driven by 3 servo-control hydraulic actuators, and consists of a 12 ton, 4m×4m×0.6m steel deck. The main objective of this investigation is to identify the degree of flexibility of the deck, and its adverse effects in causing errors in the simulation of seismic effects on different structural specimens. Many frame specimens of different weights and configurations are subjected to seismic motions, and their responses are calculated using FE models. Some of these models were designed to account for eccentric... 

Multi-site photoplethysmography is an optoelectronic technique that measures changes in blood volume associated with cardiac contraction. Photoplethysmogram (PPG) recording enables researchers to study the vascular and hemodynamic properties of human subjects. Currently, there is no commercial system available in the market to perform multi-channel PPG recording. The measurements can be obtained from fingertips, ear lobes and toes due to their low absorption and high degree of vasculature. The main objective of this project is to develop a suitable data compression algorithm for two-channel simultaneous high resolution wireless PPG recording system. MATLAB software was used during the... 

In the present study, the potential of doxorubicin hydrochloride (DOX)-loaded electrospun chitosan/cobalt ferrite/titanium oxide nanofibers was studied to investigate the simultaneous effect of hyperthermia and chemotherapy against melanoma cancer B16F10 cell lines. The cobalt ferrite nanoparticles were synthesized via microwave heating method. The titanium oxide nanoparticles were mixed with cobalt ferrite to control the temperature rise. The synthesized nanoparticles and nanofibers were characterized using X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), and vibrating sample magnetometer (VSM) analysis. The DOX loading efficiency and in vitro drug release of... 

Karyotyping, is the process of classification of human chromosomes within the microscopic images. This is a common task for diagnosing many genetic disorders and abnormalities. Automatic Karyotyping algorithms usually suffer the poor quality of the images due to the non rigid nature of the chromosomes which makes them to have unpredictable shapes and sizes in various images. One of the main problems that usually need operator's interaction is the identification and separation of the overlapping/touching chromosomes. This paper presents an effective algorithm for identification of any cluster of the overlapping/touching chromosomes together with the number of chromosomes in the cluster, which...