Sharif Digital Repository

Topological defects are specific signatures of liquid crystals. Their presence in liquid crystals are so often that they are ”vestiges” of such flows. With their presence inside a flow, they cause global change to the director field by dictating specific orintational restrictions. So their global effects on the flow are substantial. In active nematics, not only they dictate the global structure of the director, but also they act as local sources of motion and behave like self-propelled particles. In this thesis, a detailed dynamics of active liquid crystals and their topological defects is presented. Then, Solving equations of motion for such systems using computer numerical analysis, the... 

The primary purpose of acidizing operations in the oil and gas industry is to enhance hydrocarbon production. Acidizing has been a common and conventional method for years, especially when production engineers face issues like declining reservoir pressure leading to reduced production rates. Initially, the treatment solution is referred to as matrix acidizing. In acidizing operations, different additives are combined with the acid to control its behavior in the reservoir. These additives may include iron control agents, corrosion inhibitors, friction reducers, and more. Incompatibility among these additives, the acid, and reservoir fluids can lead to severe damage to the reservoir.... 

The goal of this research is the simulation of the annular combustion chamber of the turbine engine utilized by liquid fuel. The achievement to this goal will lead to create numerical tools for parametric study, analysis and combustion chamber designing.For this reason simple geometry has been considered. This simplicity of geometry causes to facilitate in parametric study and decrease in saving time for modeling and meshing. This combustion chamber is a simplified model of engine CF6. In recent study, the k – ε realizable model has been used for turbulence modeling. For non-adiabatic condition, chemical reaction is dissolved by utilizing probability density function along with laminar... 

In this work, the dynamic competition between firms providing internet services is studied. The framework is Markov equilibrium whereby structural parameters are obtained using two-step estimations, allowing for analyzing the situation in case of subsidies for service upgrade. The results show that such subsidy has little effect on the number of firms while increasing the number of fast firms  

During the last few years, the study of urban environment structures is considered as a research field of interest in remote sensing. In satellite observations of the earth's surface, continuous imaging in terms of time and space has caused the remote sensing technique to be proposed as a useful and efficient tool for the analysis of urban areas. Obtaining quantitative spatial information from the urban environment in fields such as determining the height of buildings plays an essential role in urban planning, monitoring damage to buildings, establishing communication bases and digital cities. During the last two decades, the use of Tomosar approach in order to reconstruct the structures of... 

Mobile edge computing (MEC) is a promising technology that aims to resolve cloud computing’s issues by deploying computation resources at the edge of mobile network and in the proximity of users. The advantages of MEC include reduced latency, energy consumption, and load on access and mobile core networks, to name but a few. Despite all the aforementioned advantages, the mobility of mobile network users causes the traditional MEC architecture to suffer from several issues, such as decreased efficiency and frequent service interruption. One of the methods to manage users’ mobility is virtual machine (VM) migration, where the VM containing the user’s task is migrated to somewhere closer to... 

In this study steady state and dynamic simulation of an NFM extractive distillation unit for seperation of aromatics and non-aromatic components has been carried out. Column output composition obtained with experimental binary coefficients is compared with those obtainded by UNIFAC equation. The results indicate that using UNIFAC for all binrary coefficients results in an unacceptable error in concentration of benzene. If the experimental binary coefficents of benzene with NFM are used and the rest are calculated by UNIFAC equation, the simulation results will be very close to those obtained via experimental binary coefficients. Also it is shown that considering a constant efficiency for all... 

During the brewing process, beer alternately goes through different chemical and biochemical reactions and solid–liquid separation stages. The clarification at the final step of brewing is a highly critical stage when it comes to producing a clear and bright beer. Recently, membrane technology has been successfully used in beer clarification, wherein Kieselguhr (diatomaceous earth) filtration is replaced by cross-flow microfiltration. The most important disadvantages of using microfiltration in clarification of beer is the fouling and flux decline during the process. The phenomenology of fouling mechanisms is still undefined and selection of an appropriate technique for flux enhancement in... 

Different methods can be used to produce reduction gas. One example is using coal. But today there’s a tendency to use natural gas. One way of transforming natural gas to reduction gas is to burn it with gases produced by combustion, such as or vapor; usually a catalyst is used in this method. Another method is burning natural gas directly with oxygen or air. The recent method is of benefit especially in Iran, because of available natural gas resources and avoiding catalyst problems. Designing a burner for this purpose is an important step in reaching this goal. In this project such a burner is designed and manufactured. The burner manufactured in this project burns natural gas with... 

Nowadays, with population growth and vehicle traffic increase, only providing transportation supply couldn’t answer the transportation demand. One of the most important solutions to reduce traffic is transportation demand management (TDM). In this research, the effects of parking pricing and improving public transportation services on private car demand reduction in city center are examined. The data are collected from private cars users in the city center of Isfahan through interviews. By stated preference method, the impacts of parking price and public transit travel time and other related factors were investigated. For this purpose, binary logit, multinomial logit and nested logit models... 

In this thesis, we study the problem of guarding art galleries with sliding cameras and k-transmitter. This problem is a new version of classic art gallery problem, which the goal is covering the entire region with minimum number of guards. In early version of art gallery problem, usually point guards with 360 degree vision were used, but in this thesis we use sliding cameras instead. This new guards specified by an orthogonal segment which entirely settled interior of polygon and can see up to k walls. Based on this two notions (sliding camera and k-transmitter) we say that a guard can see point p, if the intersections number of normal segment through p to corresponding segment of guard... 

Most of dynamical models in the real world, have various restrictions and complexities in their structures. These constraints make the controller design much more difficult. In this work, it has been tried to design the controller for two kinds of common dynamical systems in the presence of these restriction by using the fuzzy logic systems. Several restrictions are investigated in this project such as unknown dynamic of the model, unmeasured state variables, unknown control directions, existence of time delay in the input and the state variables, input saturation and controller singularity.The backstepping technique and the dynamic surfaces control approach have been used to design the... 

The Cu2ZnSnS4 (CZTS) quaternary compound, with suitable optical and electrical properties, is one of the most interesting materials for absorber layer of thin film solar cell. Since all constituents of CZTS, are abundant in earth’s crust and non-toxic, it is a proper replacement for the materials like CdTe and CuInSe2. The CZTS pellet was synthesized by the solid-state reaction and deposited on soda lime glass substrates by pulsed laser deposition (PLD) method. PLD technique has the advantages of offering stoichiometric preservation during the materials transformation from target to substrate and good crystallinity due to the highly energetic species. CZTS has was deposited in order to... 

For the past few years, increasing the airspace capacity has been one of the most detrimental issues facing air traffic management. Statistically speaking, the demand for aerial transportation has been continuously growing hitting an %8.1 growth in 2017. This growth rate in conjunction with the performance and safety considerations for the ATC systems, clearly indicate the need for a practical and safe solution to the airspace capacity problem. Dynamic Airspace Configuration (DAC), is one of the proposed methods addressing this problem by changing the airspace configuration over time.In this research, we have introduced an intelligent method for airspace configuration given the forecast of...