Loading...
Search for: arpanaei--ayyoob
0.005 seconds

    α-Amylase Immobilization on Nanocomposite Magnetic Silica Particles and Characterization of the Prepared Nanobiocatalysts

    , M.Sc. Thesis Sharif University of Technology Sayyahmanesh, Maryam (Author) ; Mashayekhan, Shohreh (Supervisor) ; Arpanaei, Ayyoob (Supervisor)
    Abstract
    Enzymes are widely used in industry, however, the expensive cost, low stability, and the limited activity in a certain range of temperature and pH, have limited the usage of such bio-catalists. In addition to increasing and preserving their activity under different conditions, the enzyme immobilization can improve its stability in different pH, temperature values and increase its thermostability, storage stability and the possibility of their recycling. Meanwhile, utilizing the super-magnetic systems could be very helpful as well. For instance, separation of the the magnetic nano-particles like Fe3O4 from reaction system using an external magnetic field is easily possible. In this study,... 

    Investigation and Determination of Optimal Composition of Hydrogels and Nanoparticles for Proliferation of Mesenchymal Stem Cells in Alginate Beads

    , M.Sc. Thesis Sharif University of Technology Akbari Kenari, Mahsa (Author) ; Yaghmaei, Soheila (Supervisor) ; Arpanaei, Ayyoob (Supervisor)
    Abstract
    The aim of this dissertation is to investigate and determine the optimal composition of hydrogels that can meet the needs of stem cells for the growth and proliferation of mesenchymal stem cells. In this research, firstly, unfunctionalized and functionalized mesoporous silica nanoparticles (with an average diameter of approximately 90 nm), were synthesized. Scanning electron microscopy and zeta potential measurement were utilized to study their morphology and surface charge. Then, graphene oxide nanosheets were synthesized. Field emission electron microscopy, zeta potential measurement and Fourier transform infrared spectrum analysis were used to examine their morphology, surface charge and... 

    Synthesis of Cationic Mesoporous Silica Nanoparticles as a Carrier for the Deliveryof Nucleic Acids

    , M.Sc. Thesis Sharif University of Technology Kermanshah, Leyla (Author) ; Vosoughi, Manouchehr (Supervisor) ; Arpanaei, Ayyoob (Supervisor) ; Javadi, Hamid Reza (Co-Advisor)
    Abstract
    Mesoporous silica nanoparticles (MSNP) have attracted lots of attentions because of their particular characteristics. Physical characteristics such as structure, morphology, porosity, and size of these nanoparticles have strong impact on their function and it can be conceived a wide range of applications for them by manipulating these characteristics. In this research, monodispersed MSNPs with a controllable size in the range of 50-130 nm and pore size in the range of 4-24 nm were synthesized and positively functionalized in order to develop a carrier for the delivery of nucleic acids (siRNA and pDNA). The MSNPs were synthesized by the template removing method.In this method, sodium... 

    Fabrication and Characterization of a Drug Release System Based on Mesoporous Silica Nanoparticles for Hydrophobic Drugs

    , M.Sc. Thesis Sharif University of Technology Taebnia, Nayyera (Author) ; Yaghmaei, Soheila (Supervisor) ; Arpanaei, Ayyoob (Supervisor) ; Morshedi, Dina (Co-Advisor)
    Abstract
    This research aims to develop a drug delivery system based on mesoporous silica nanoparticles (MSNPs) for hydrophobic drugs and evaluating their cytotoxicity. The internal environment of the body is aqueous, while most of effective drugs display poor aqueous solubility, resulting in insufficient bioavailability. Due to their several unique properties, such as a large surface area, tunable pore size, facile surface multi functionalization and excellent biocompatibility, MSNPs are recognized as promising and powerful tools to overcome this hurdle. In the present study, MSNPs were synthesized using template removing method and then were functionalized through grafting procedure. They were... 

    Preparation of Polyelectrolyte-Coated Magnetic Silica Nanocomposite Particles and Investigation of their Application for Enzyme Immobilization and Biodiesel Production

    , Ph.D. Dissertation Sharif University of Technology Esmaeilnejad-Ahranjani, Parvaneh (Author) ; Kazemeini, Mohammad (Supervisor) ; Arpanaei, Ayyoob (Supervisor) ; Singh, Gurvinder (Co-Advisor)
    Abstract
    In this study, polyelectrolyte-coated magnetic silica nanocomposites were prepared via the covalent attachment of polyelectrolytes onto the as-prepared magnetite-silica particles with core-shell structures and average diameter of 210±50 nm, and subsequently applied for the immobilization of lipase molecules. In this regard, polyethyleneimine (PEI) with two molecular weights of 10000 and 750000 and polyacrylic acid (PAA) with two molecular weights of 1800 and 100000 were utilized. The type and molecular weight of the polyelectrolyte molecules greatly impacted the concentration of binding sites on the particles surface and consequently on the lipase immobilization efficiency and loading... 

    The Study of Function of Lipase Biocatalyst Immobilized on Silica Nanoparticles Used for Biodiesel Production

    , M.Sc. Thesis Sharif University of Technology Kalantari, Mohammad (Author) ; Kazemini, Mohammad (Supervisor) ; Arpanaei, Ayyoob (Supervisor) ; Tabandeh, Fatemeh (Co-Advisor)
    Abstract
    Superparamagnetic core/shell nonporous (S1) and core/shell/shell mesoporous (S2 and S3) nanocomposite magnetite/silica particles with a magnetite cluster core of 130±30 nm, a nonporous silica shell of 90±10 nm thickness, and a mesoporous silica shell of 70±15 nm thickness were prepared thorough a simple method. Mesoporous particles were prepared with two BJH pore sizes (2.44 for S2 and 3.76 nm for S3 particles, respectively). The fabricated S1, S2 and S3 particles present high saturation magnetization values of 20, 13 and 17 emu/g, respectively. As a biological application, the lipase from Pseudomonas cepacia was successfully immobilized onto the amino-functionalized nanocomposite particles... 

    Design and Construction of Alginate-Silica Nanocomposite and Its Application for Mammalian Cell Culture

    , M.Sc. Thesis Sharif University of Technology Mohammadi Fard, Hossein (Author) ; Vossughi, Manouchehr (Supervisor) ; Arpanaei, Ayyoob (Supervisor) ; Kabir Salmani, Maryam (Co-Advisor)
    Abstract
    Three sizes of silica nanoparticles (160±7, 450±10 and 600±25) were sythetized via template-removing method. The synthetized nanoparticles were functionalized with N-(2-aminoethyl)-3-aminopropyl trimethoxy-silane (EDS) to provide a positive charge on the surface of nanoparticles. BET analysis showed that the average pore diameter, surface area and pore volume of nanoparticles were 2.3 nm, 769 m2.g-1 and 0.44 cm3.g-1, respectively. showed that the Amine-functionalized silica nanoparticles were used to enhance the application of alginate polymer for 3D encapsulation of mammalian cells. Incorporating of silica nanoparticles can be suitable for the bead integrity and attachement of mammalian... 

    3D Stem Cell Culture and Differentiation Using Alginate Hydrogel Scaffolds Incorporated with Silicon-Based Nanoparticles

    , Ph.D. Dissertation Sharif University of Technology Hassani, Masoud (Author) ; Yaghmaei, Soheila (Supervisor) ; Arpanaei, Ayyoob (Co-Supervisor) ; Dolatshahi Pirouz, Alireza (Co-Supervisor)
    Abstract
    Bone is one of the most vital parts of the body for almost any functional movement. Due to its many involved diseases, traumas and injuries, bone maintenance and regeneration are of high importance. Engineering and design of complex tissues, with impeccable mimicry of the native ones, are always accounted as the solution to dysfunction of body organs due to aging, various diseases, etc. However, the inability to complete mimicry of the native tissue architecture and cell microenvironment are the main barriers to functional tissue regeneration. In this project, in order to design a suitable scaffold for bone regeneration, hydrogel nanocomposites with polysaccharide basis were developed by... 

    Fabrication of Fe-oxide@Silica@Gold (core/shell/shell) in Order to Development of Biomarkers

    , M.Sc. Thesis Sharif University of Technology Mohammad-Beigi, Hossein (Author) ; Yaghmaei, Soheyla (Supervisor) ; Arpanaei, Ayyoob (Supervisor) ; Roosta Azad, Reza (Co-Advisor)
    Abstract
    The aim of this work is fabrication of magnetite@silica@gold particles. Study of the effect of pH showed that increasing pH from 9 to 12 resulted in a decrease in the size of magnetite nanoparticles from 7.9±1.38 nm to 5±0.64 nm. The TEM results indicated that modifying magnetic nanoparticles with sodium citrate prior to coating with silica leads to a narrow particle size distribution (275±16.1nm) and less number of silica nanoparticles without any magnetite core. Three methods were applied for attachment of gold nanoparticles seeds onto the silica surface: 1) use of an electrostatic interaction between positively-charged aminated silica and negatively-charged gold nanoparticles surfaces, 2)...