Sharif Digital Repository

Operational modal analysis based on power spectral density transmissibility (PSDT) functions is a useful tool to identify the modal parameters with low sensitivity to excitations. For pole extraction from the PSDT function, a proper parametric identification method such as the polyreference least squares complex frequency-domain method or poly-Max method can be used. Then, the poles are selected from a stabilization diagram (SD) with overestimating the system model order. Therefore, spurious modes can be identified that must be distinguished and removed from the system poles. To reach this aim, many techniques have been proposed and applied. In this paper, a new algorithm is proposed to... 

In this study, the effect of protection methods regarding the corrosion decrement of steel in concrete was simulated by artificial neural networks (ANNs) and fuzzy logic (FL) approaches. Hot dip galvanizing as a protective coating, Ferrogard 901 corrosion inhibitor, a pozzolanic component, such as fly ash (FA) and micro-silica (MS), and eventually rebar AISI-304 were employed in concrete. Reinforced concrete samples were held under impressed voltage of 30 V in 3.5 % NaCl electrolyte for 350 hours toward a stainless-steel auxiliary electrode. Corrosion currents have been modelled using feed forward back propagation ANNs and FL methods. The results demonstrate good consistency between... 

Corrosion of steel rebars in concrete can reduce the durability of concrete structures in coastal environments. The corrosion rate of these concrete structures can be reduced by using suitable concrete additives and coating on rebars. This paper investigates the corrosion resistance of steel rebars by the addition of pozzolanic materials including fly ash, silica fume, polypropylene fibers, and industrial 2-dimethylaminoethanol (FerroGard 901) inhibitors to the concrete mixture. Three different types of rebars including mild steel rebar st37, and two stainless steel reinforcements, AISI 304 and AISI 316, were used. Various types of primer and coating including alkyd based primer, hot-dip... 

The compactification of 6 dimensional Salam-Sezgin model in the presence of 3-form flux H is investigated. We find a torus topology for this compactification with two cusps which are the places of branes, while at the limit of large size L of the compact direction we also obtain sphere topology. This resembles the Randall-Sundrum I,II model. This compactification also provides an example for the so-called 'time warp' solution, [0812.5107 [hep-th]]. According to a no-go theorem in d6, the time warp compactification violates the null energy condition. While the theorem is quiet for d = 6, our model gives a time warp compactification which satisfies the null energy condition. We also derive the... 

In this paper, an exact solution procedure is presented for the Weighted Earliness-Tardiness Project Scheduling Problem (WETPSP) with Generalized Precedence Relations (WETPSP-GPR), taking into account the time value of money (WETPSPDC-GPR) and a fixed deadline for the project. The WETPSP-GPR extends the WETPSP to arbitrary minimal and maximal time-lags between the starting and completion times of activities. We present a new depth-first Branch and Bound (B&B) algorithm for an extended form of the problem, in which the time value of money is taken into account by discounting cash flows, and minimum, as well as maximum, time-lags between different activities may be given. The algorithm is... 

This research considers a project scheduling problem with the object of minimizing weighted earliness-tardiness penalty costs, taking into account a deadline for the project and precedence relations among the activities. An exact recursive method has been proposed for solving the basic form of this problem. We present a new depth-first branch and bound algorithm for extended form of the problem, which time value of money is taken into account by discounting the cash flows. The algorithm is extended with two bounding rules in order to reduce the size of the branch and bound tree. Finally, some test problems are solved and computational results are reported. © 2008 Asian Network for Scientific... 

TiO 2 -rGO nanocomposite coatings were obtained by electrophoretic deposition (EPD) technique of TiO 2 nanoparticles and graphene oxide (GO) on stainless steel substrate. First, GO particles were synthesized using a modified Hummers' method. GO was reduced electrochemically to form a coating in the presence of nano-sized TiO 2 particles. The influences of different parameters such as GO concentration, coupling co-electro-deposition parameters (electrophoretic duration and voltage) on thickness, surface morphology and, corrosion behavior of the as-synthesized TiO 2 -rGO nanocomposite coatings were systematically surveyed. The morphology and microstructure were investigated by field emission... 

The ongoing COVOD-19(SARS-CoV-2) outbreak has had a devastating impact on the economy, education and businesses. In this paper, the behavior of an epidemic is simulated on different contact networks. Herein, it is assumed that the infection may be transmitted at each contact from an infected person to a susceptible individual with a given probability. The probability of transmitting the disease may change due to the individuals' social behavior or interventions prescribed by the authorities. We utilized simulation on the contact networks to demonstrate how seesaw scenarios of lockdown can curb infection and level the pandemic without maximum pressure on the poor societies. Soft scenarios... 

The ongoing COVOD-19(SARS-CoV-2) outbreak has had a devastating impact on the economy, education and businesses. In this paper, the behavior of an epidemic is simulated on different contact networks. Herein, it is assumed that the infection may be transmitted at each contact from an infected person to a susceptible individual with a given probability. The probability of transmitting the disease may change due to the individuals' social behavior or interventions prescribed by the authorities. We utilized simulation on the contact networks to demonstrate how seesaw scenarios of lockdown can curb infection and level the pandemic without maximum pressure on the poor societies. Soft scenarios... 

In this research, we simulate the corrosive behavior of steel reinforcements on 5 different mixtures to investigate the effect of two powerful protective methods, including pozzolanic additives and corrosion inhibitor on concrete, by artificial neural networks (ANNs). Related to this model, fly ash (FA), micro silica (MS), and slag were used as pozzolanic materials at an optimum 25%, 10%, and 25% of cement weight, respectively. Moreover, Ferrogard 901 as an inhibitor was also utilized. The producer recommends using12 kg/m3 to get the best possible results. The non-linear corrosion of concrete into a marine solution (3.5% NaCl) was simulated by the feed forward back propagation (FFBP)... 

In this research, we simulate the corrosive behavior of steel reinforcements on 5 different mixtures to investigate the effect of two powerful protective methods, including pozzolanic additives and corrosion inhibitor on concrete, by artificial neural networks (ANNs). Related to this model, fly ash (FA), micro silica (MS), and slag were used as pozzolanic materials at an optimum 25%, 10%, and 25% of cement weight, respectively. Moreover, Ferrogard 901 as an inhibitor was also utilized. The producer recommends using12 kg/m3 to get the best possible results. The non-linear corrosion of concrete into a marine solution (3.5% NaCl) was simulated by the feed forward back propagation (FFBP)... 

The process of self-color anodizing of titanium is done in acidic and alkaline solutions, and anodic films of different colors are formed. Results of this work show that the corrosion rate of titanium decreased after the application of an anodizing layer  

In this paper, a non parametric approach is first proposed to monitor simple linear profiles with non normal error terms in Phase I and Phase II. In this approach, two control charts based on a transformation technique and decision on beliefs are designed in order to monitor the intercept and the slope, simultaneously. Then, some simulation experiments are performed in order to evaluate the performance of the proposed control charts in Phase II under both step and drift shifts in terms of out-of-control average run length (ARL1). Besides, the performance of the proposed control charts is compared to the ones of seven other existing schemes in the literature. Simulation results show that the... 

Estimating precipitation at high spatial-temporal resolution is vital in manifold hydrological, meteorological and water management applications, especially over areas with un-gauged networks and regions where water resources are on the wane. This study aims to evaluate five downscaling methods to determine the accuracy and efficiency of which on generating high-resolution precipitation data at annual and monthly scales. To establish precipitation-Land surface characteristics relationship, environmental factors, including Normalized Difference Vegetation Index (NDVI), Land Surface Temperature (LST) and Digital Elevation Model (DEM), were considered as proxies in the spatial downscaling... 

We show that conformal Chern-Simons gravity in three dimensions has various holographic descriptions. They depend on the boundary conditions on the conformal equivalence class and the Weyl factor, even when the former is restricted to asymptotic anti-de Sitter behavior. For constant or fixed Weyl factor our results agree with a suitable scaling limit of topologically massive gravity results. For varying Weyl factor we find an enhancement of the asymptotic symmetry group, the details of which depend on certain choices. We focus on a particular example where an affine u^(1) algebra related to holomorphic Weyl rescalings shifts one of the central charges by 1. The Weyl factor then behaves as a... 

We discuss a fine-tuning of rather generic 3-dimensional higher-curvature gravity actions that leads to gauge symmetry enhancement at the linearized level via partial masslessness. Requiring this gauge symmetry to be present also nonlinearly reduces such actions to conformal Chern-Simons gravity. We perform a canonical analysis of this theory and construct the gauge generators and associated charges. We provide and classify admissible boundary conditions. The boundary conditions on the conformal equivalence class of the metric render one chirality of the partially massless Weyl gravitons normalizable and the remaining one non-normalizable. There are three choices-trivial, fixed, or free-for... 

We report a simple and inexpensive synthesis route of TiO2 nanoparticles using electrical arc discharge between titanium electrodes in oxygen bubbled deionized (DI) water followed by heat treatment. The resulting nanoparticles were characterized using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), dynamic light scattering (DLS), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). XRD patterns demonstrate formation of TiO2 phase in oxygen bubbled water after heat treatment and dominance of rutile to anatase phase. The size and morphology of TiO2 nanoparticles were studied using different arc currents as a crucial parameter in properties of final... 

Biphase TiO2 nanoparticles have been prepared by sol-gel method. Water/titanium molar ratio (r) has been used to control the hydrolysis and condensation of titanium isopropoxide in solution producing titanium oxide with two different polymorphs. The influence of crystallite size and morphology of prepared TiO2 on the phase transformation of the resultant materials has been investigated. Synthesized powders were characterized by X-ray diffraction, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Different trends can be observed in the phase transformation and particle growth of the prepared titanium oxide nanomaterial. It was concluded that, the rate of particle... 

The study deals with the design and optimization of external and internal geometry of micro-wind turbines blades. A specified objective function which consists of the power coefficient and the starting time was defined and the genetic algorithm optimization technique in conjunction with the blade-element momentum theory was adopted to find the geometry of the blades including the distributions of the chord, the twist angle and also the shell thickness. Moreover, the allowable stress of the blades was considered as a constraint to the objective function. Results show that a reasonable compromise is achievable such that the starting time of the blades reduces noticeably in return for a small... 

The authors regret to inform that an error occurred in the arrangement and display of three figures (Figs. 3, 4 and 5) of the article with the aforementioned title [1]. These figures are related to the binary interaction curves of the operating variables and the results of the sensitivity analyses. The correct figures are now presented via this corrigendum. It is worth mentioning that none of these mistakes affect the originality of the article's text and the presented results. The authors would like to apologise for any inconvenience caused. [1] E. Salehi, M. Askari, S. Afshar, B. Eidi, M. H. Aliee, Adsorptive Desulfurization of Wild Naphtha Using Magnesium Hydroxide – Coated Ceramic Foams...